3,577 research outputs found
TiO2 film properties as a function of processing temperature, volume 3
Thin film TiO2 was produced at 150 C by chemical vapor deposition using hydrolysis of tetraisopropyl titanate. Films were amorphous as grown, but annealing in air caused crystallization, with anatase formed beginning at 350 C and rutile at 700 C. Density and index of refraction increased substantially with increasing anneal temperature, while etch susceptibility in HF and H2SO4 decreased. Comparison with literature data showed two groups of processes. One group yields films having properties that gradually approach those of rutile with increasing process temperature. The other group gives rutile directly at moderate temperatures. Deposition of amorphous film followed by etching and annealing is suggested as a means for pattern definition
RTG/science instrument radiation interactions for deep space probes, phase 2, 3, and 4
Assessment of interference to scientific instruments onboard RTG powered spacecraft caused by radiation emanating from RTG unit with application to Pioneer F/G space probe
Actin cytoskeleton: Setting the pace of cell movement
AbstractEukaryotic cells have many proteins that cap the barbed ends of actin filaments. Manipulation of their cellular concentration leads to changes in cell motility rates, actin dynamics and signal transduction reactions
Do Gender Differences in Perceived Prototypical Computer Scientists and Engineers Contribute to Gender Gaps in Computer Science and Engineering?
Women are vastly underrepresented in the fields of computer science and engineering (CS&E). We examined whether women might view the intellectual characteristics of prototypical individuals in CS&E in more stereotype-consistent ways than men might and, consequently, show less interest in CS&E. We asked 269 U.S. college students (187, 69.5% women) to describe the prototypical computer scientist (Study 1) or engineer (Study 2) through open-ended descriptions as well as through a set of trait ratings. Participants also rated themselves on the same set of traits and rated their similarity to the prototype. Finally, participants in both studies were asked to describe their likelihood of pursuing future college courses and careers in computer science (Study 1) or engineering (Study 2). Across both studies, we found that women offered more stereotype-consistent ratings than did men of the intellectual characteristics of prototypes in CS (Study 1) and engineering (Study 2). Women also perceived themselves as less similar to the prototype than men did. Further, the observed gender differences in prototype perceptions mediated the tendency for women to report lower interest in CS&E fields relative to men. Our work highlights the importance of prototype perceptions for understanding the gender gap in CS&E and suggests avenues for interventions that may increase women’s representation in these vital fields
Einfluss der Substrattemperatur auf die Haftung schmelzgeschichteter Prüfkörper aus thermoplastischem Polyurethan auf aminosilanen Haftvermittlerschichten
Aufgrund ihrer Eigenschaft, der Lokalisation mechanischer Spannungen – im Gegensatz zu mechanischen Fügetechniken – entgegenzuwirken, gewinnen stoffschlüssige Fügetechniken auch im Bereich des Fügens an spröden Komponenten im Bereich des Sanitärbaus, der Herstellung von Gebrauchsporzellan oder in der Displaytechnik immer mehr an Bedeutung.
Besonders erstrebenswert ist in diesem Zusammenhang eine Kombination aus sehr harten und spröden Stoffeigenschaften einer Glasoberfläche oder einer glasierten Oberfläche mit den weich-elastischen Eigenschaften eines thermoplastischen Elastomers. Prinzipiell lassen sich derartige Verbunde durch das direkte Anspritzen an die anorganische Komponente etwa in einem Spritzguss- oder in einem nachdruckfreien Spritzprägeprozess erreichen. Aufgrund der Notwendigkeit einer Form mit entsprechend enger Fertigungstoleranz und den daraus resultierenden hohen Werkzeugkosten erscheinen drucklose Schmelzschichtverfahren, bei denen eine extrudierte thermoplastische Schmelze direkt auf dem Substrat aufgetragen wird, als Fertigungsverfahren zielführend. Sie eröffnen zudem durch eine hohe Gestaltungsfreiheit der angedruckten Komponente innovative Fertigungs-möglichkeiten für hybride Prototypen und neue Reparaturtechnologien. Für den drucklosen Prozess der Materialextrusion auf einer mit einem Aminosilan versehenen anorganischen Oberfläche ist vor allem die Oberflächentemperatur entscheidend. Erst bei hinreichend hoher Temperatur – ähnlich wie beim Heißkleben – kann eine ausreichend starke Molekülbewegung für die mechanische Adhäsion und zusätzlich beim Einsatz von Aminosilanen vermehrt Interaktion mit den funktionellen Gruppen des Haftvermittlers erreicht werden. Weiterhin ist die thermische Zersetzung der primären und sekundären Amine in höheren Temperaturbereichen bei einer Bewertung des Druckprozesses zu berücksichtigen.
Für eine Betrachtung des Einflusses der Oberflächentemperatur während des Schmelzschichtvorgangs und eine Bewertung der resultierenden Haftung wurden emaillierte Stahlproben zunächst mit einer amorphen SiO2-Beschichtung versehen und im Folgenden mit einem Aminosilan nasschemisch beschichtet. Im Nachgang wurden diese Oberflächen bei unterschiedlichen Druckbetttemperaturen Prüfkörper aus thermoplastischem Polyurethan mittels fused layer manufacturing (FLM) gedruckt. Abschließend erfolgte eine mechanische Charakterisierung der Verbindungsfestigkeit in einem Kopfzugversuch
Toward an ecological aesthetics: music as emergence
In this article we intend to suggest some ecological based principles
to support the possibility of develop an ecological aesthetics. We consider that
an ecological aesthetics is founded in concepts as “direct perception”,
“acquisition of affordances and invariants”, “embodied embedded
perception” and so on. Here we will purpose that can be possible explain
especially soundscape music perception in terms of direct perception, working
with perception of first hand (in a Gibsonian sense). We will present notions
as embedded sound, detection of sonic affordances and invariants, and at the
end we purpose an experience with perception/action paradigm to make
soundscape music as emergence of a self-organized system
Evolution of Late- to Postglacial River Confluences in Overdeepened Alpine Valleys – Saalach and Königsseeache (Austria)
Naphthalene – Addendum: evaluation of EKA. Assessment Values in Biological Material – Translation of the German version from 2022
Naphthalin – Addendum: Evaluierung von EKA. Beurteilungswerte in biologischem Material
- …