The association between seeking financial compensation and injury recovery following motor vehicle related orthopaedic trauma

© 2016 The Author(s). Background: Motor vehicle related moderate-severe orthopaedic trauma has a major impact on the burden of injury. In Australia, all states and territories provide access to financial compensation following injury in a motor vehicle crash. The aim of this study was to investigate the influence of seeking financial compensation (i.e., making a claim) on injury recovery following motor vehicle related moderate-severe orthopaedic trauma. Methods: Patients admitted with upper/lower extremity fractures after a motor vehicle crash were recruited from two trauma hospitals. Baseline data were collected in person by written questionnaire within two weeks of injury. Follow up data were collected by a mailed written questionnaire at six, 12 and 24 months. Additional (demographic/injury-related) information was collected from hospital databases, all other measures were self-reported. Outcomes were: Short Form-36 Version 2.0 (SF36v2), Physical/Mental Component Scores (PCS/MCS); Post Traumatic Stress Disorder (PTSD) Checklist Civilian Version (PCL-C); and Global Rating of Change (GRC) scale. Analysis involved descriptive statistics and linear mixed models to examine the effect of compensation status on injury recovery over time. Results: There were 452 study participants. Baseline characteristics showed: mean age 40 years (17.1 Standard Deviation [SD]); 75 % male; 74 % worked pre-injury; 67 % in excellent-very good pre-injury health; 56 % sustained serious injuries, Injury Severity Score (ISS) 9-15; 61 % had a low-middle range household income. Overall, after controlling for possible confounders, the compensable group had poorer recovery compared to the non-compensable group for PCS (-2.97 Mean Difference (MD), 95 % CI -4.73, -1.22); MCS (-3.44 MD, 95 % CI -5. 62, -1.26); PCL-C (3.42MD, 95 % CI 0.87, 5.99); and GRC (-0.66MD, 95 % CI -1.15, -0.17). Injury recovery over time for all participants showed: PCS improved from 6-12 and 12-24 months; MCS and GRC improved from 6-12 months; and PCL-C did not significantly improve from 6-12 and 12-24 months. Injury recovery over time continued for compensable and non-compensable groups but compensable participants had poorer scores at each time period, especially MCS and PCL-C. Conclusions: Making a claim was associated with poor injury recovery following motor vehicle related orthopaedic trauma, mainly for mental health. Irrespective of claim status, the majority had poor injury recovery, especially for mental health

Predictors of return to work following motor vehicle related orthopaedic trauma

© 2016 Murgatroyd et al. Background: Work disability following motor vehicle related orthopaedic trauma is a significant contributor to the burden of injury and disease. Early identification of predictors for return to work (RTW) is essential for developing effective interventions to prevent work disability. The study aim was to determine the predictors (including compensation related factors) of time to RTW following motor vehicle related orthopaedic trauma. Methods: Admitted patients were recruited prospectively from two trauma hospitals with upper and/or lower extremity fractures following a motor vehicle crash. Baseline and follow up data were collected by written questionnaire. For baseline, this occurred in person within 2 weeks of injury. For follow up, this occurred by mail at six, 12 and 24 months. Additional demographic and injury-related information was retrieved from hospital databases. Analysis involved: descriptive statistics; logrank test to detect survival distributions of categorical variables; and Cox proportional hazards regression models for risks of time to RTW using baseline characteristic and compensation related variables (at 6 months). Results: Of 452 study participants 334 (74 %) were working pre-injury: results are based on this subset. Baseline characteristics were mean age 36 years (13.9 Standard Deviation [SD]), 80 % male; 72 % self-assessed very good-excellent pre-injury health, 83 % household income > AU$40,000 (Australian Dollar). Follow up data was available for 233 (70 %), 210 (63 %), and 182 (54 %) participants at six, 12 and 24 months respectively. Significant risks of a longer time to RTW were greater injury severity, as measured by the New Injury Severity Score (NISS) (Hazards Rate Ratio [HRR] = 0.54, 95 % CI 0.35-0.82); and lower occupational skill levels (HRR = 0.53, 95 % CI 0.34-0.83). Significant risks of a shorter time to RTW were: recovery expectations for usual activities within 90 days (HRR = 2.10, 95 % CI 1.49-2.95); full-time pre-injury work hours (HRR = 1.99, 95 % CI 1.26-3.14); and very good self-assessed pre-injury health status (HRR = 1.41, 95 % CI 0.98-2.02). Legal representation (analysed at six months only) was not associated with time to RTW. At each time period, there were 146 (63 %), 149 (71 %), and 137 (76 %) working participants. Conclusions: A longer time to RTW was associated with greater injury severity and lower occupational skill levels; while a shorter time to RTW was associated with recovery expectations for usual activities within 90 days, full-time pre-injury work hours, and very good self-assessed pre-injury health status. Our findings reinforce existing research. There is an opportunity to trial interventions that address potentially modifiable factors. The issues surrounding legal representation are complex and require further research

Predictive feedback control and Fitts' law

Fitts’ law is a well established empirical formula, known for encapsulating the “speed-accuracy trade-off”. For discrete, manual movements from a starting location to a target, Fitts’ law relates movement duration to the distance moved and target size. The widespread empirical success of the formula is suggestive of underlying principles of human movement control. There have been previous attempts to relate Fitts’ law to engineering-type control hypotheses and it has been shown that the law is exactly consistent with the closed-loop step-response of a time-delayed, first-order system. Assuming only the operation of closed-loop feedback, either continuous or intermittent, this paper asks whether such feedback should be predictive or not predictive to be consistent with Fitts law. Since Fitts’ law is equivalent to a time delay separated from a first-order system, known control theory implies that the controller must be predictive. A predictive controller moves the time-delay outside the feedback loop such that the closed-loop response can be separated into a time delay and rational function whereas a non- predictive controller retains a state delay within feedback loop which is not consistent with Fitts’ law. Using sufficient parameters, a high-order non-predictive controller could approximately reproduce Fitts’ law. However, such high-order, “non-parametric” controllers are essentially empirical in nature, without physical meaning, and therefore are conceptually inferior to the predictive controller. It is a new insight that using closed-loop feedback, prediction is required to physically explain Fitts’ law. The implication is that prediction is an inherent part of the “speed-accuracy trade-off”

Geo-environmental mapping using physiographic analysis: constraints on the evaluation of land instability and groundwater pollution hazards in the Metropolitan District of Campinas, Brazil

Geo-environmental terrain assessments and territorial zoning are useful tools for the formulation and implementation of environmental management instruments (including policy-making, planning, and enforcement of statutory regulations). They usually involve a set of procedures and techniques for delimitation, characterisation and classification of terrain units. However, terrain assessments and zoning exercises are often costly and time-consuming, particularly when encompassing large areas, which in many cases prevent local agencies in developing countries from properly benefiting from such assessments. In the present paper, a low-cost technique based on the analysis of texture of satellite imagery was used for delimitation of terrain units. The delimited units were further analysed in two test areas situated in Southeast Brazil to provide estimates of land instability and the vulnerability of groundwater to pollution hazards. The implementation incorporated procedures for inferring the influences and potential implications of tectonic fractures and other discontinuities on ground behaviour and local groundwater flow. Terrain attributes such as degree of fracturing, bedrock lithology and weathered materials were explored as indicators of ground properties. The paper also discusses constraints on- and limitations of- the approaches taken

Reliability and validity of the AGREE instrument used by physical therapists in assessment of clinical practice guidelines

BACKGROUND: The AGREE instrument has been validated for evaluating Clinical Practice Guidelines (CPG) pertaining to medical care. This study evaluated the reliability and validity of physical therapists using the AGREE to assess quality of CPGs relevant to physical therapy practice. METHODS: A total of 69 physical therapists participated and were classified as generalists, specialist or researchers. Pairs of appraisers within each category evaluated independently, a set of 6 CPG selected at random from a pool of 55 CPGs. RESULTS: Reliability between pairs of appraisers indicated low to high reliability depending on the domain and number of appraisers (0.17–0.81 for single appraiser; 0.30–0.96 when score averaged across a pair of appraisers). The highest reliability was achieved for Rigour of Development, which exceeded ICC> 0.79, if scores from pairs of appraisers were pooled. Adding more than 3 appraisers did not consistently improve reliability. Appraiser type did not determine reliability scores. End-users, including study participants and a separate sample of 102 physical therapy students, found the AGREE useful to guide critical appraisal. The construct validity of the AGREE was supported in that expected differences on Rigour of Development domains were observed between expert panels versus those with no/uncertain expertise (differences of 10–21% p = 0.09–0.001). Factor analysis with varimax rotation, produced a 4-factor solution that was similar, although not in exact agreement with the AGREE Domains. Validity was also supported by the correlation observed (Kendall-tao = 0.69) between Overall Assessment and the Rigour of Development domain. CONCLUSION: These findings suggest that the AGREE instrument is reliable and valid when used by physiotherapists to assess the quality of CPG pertaining to physical therapy health services

Evaluating the potential for the environmentally sustainable control of foot and mouth disease in Sub-Saharan Africa

Strategies to control transboundary diseases have in the past generated unintended negative consequences for both the environment and local human populations. Integrating perspectives from across disciplines, including livestock, veterinary and conservation sectors, is necessary for identifying disease control strategies that optimise environmental goods and services at the wildlife-livestock interface. Prompted by the recent development of a global strategy for the control and elimination of foot-and-mouth disease (FMD), this paper seeks insight into the consequences of, and rational options for potential FMD control measures in relation to environmental, conservation and human poverty considerations in Africa. We suggest a more environmentally nuanced process of FMD control that safe-guards the integrity of wild populations and the ecosystem dynamics on which human livelihoods depend while simultaneously improving socio-economic conditions of rural people. In particular, we outline five major issues that need to be considered: 1) improved understanding of the different FMD viral strains and how they circulate between domestic and wildlife populations; 2) an appreciation for the economic value of wildlife for many African countries whose presence might preclude the country from ever achieving an FMD-free status; 3) exploring ways in which livestock production can be improved without compromising wildlife such as implementing commodity-based trading schemes; 4) introducing a participatory approach involving local farmers and the national veterinary services in the control of FMD; and 5) finally the possibility that transfrontier conservation might offer new hope of integrating decision-making at the wildlife-livestock interface

Hybrid Additive Manufacture of Conformal Antennas

This paper presents a new digitally driven manufacturing process chain for the production of high performance, three-dimensional RF devices. This is achieved by combining Fused Filament Fabrication of polyetherimide based polymer with selective light-based synthesis of silver nanoparticles and electrochemical deposition of copper. The resultant manufacturing method produces devices with excellent DC electrical resistivity (6.68 μΩ cm) and dielectric properties (relative permittivity of 2.67 and loss tangent of 0.001). Chemically modifying and patterning the substrate to produce the metallization overcomes many of the limitations of direct write deposition methods resulting in improved performance, adhesion and resolution of the antenna pattern. The fabricated demonstrators cover a broadband range of 0.1 GHz - 10 GHz and the measured results show a direct agreement with the simulated design over a wide frequency band. Overall the materials used as a substrate have a low relative permittivity and lower dielectric loss than FR-4, thereby making them well suited for antenna applications