242 research outputs found
Mussel Inventory and Population Status of the Federally Endangered Potamilus capax (Green 1832) in the Tyronza River, Arkansas
Currently, few data exist for the mussel assemblages of the Tyronza River, Arkansas. The goal of this project was to inventory the freshwater mussel assemblages of the Tyronza River and determine the status of the federally endangered Potamilus capax. We qualitatively and quantitatively sampled mussel assemblages and documented the occurrence of S1 (extremely rare), S2 (very rare), and S3 (rare to uncommon) species. A total of 70.4 river kilometers were sampled in 2006 and 2007 resulting in 363 sampling sites, 4030 live individuals, and 25 species. We observed a total of 1 S1, 2 S2, and 9 S3 species. Mean catch-per-unit-of-effort was 0.9 (1.2 SD) individuals / min. and mean species richness and individual abundance were 3.4 (2.7 SD) species / site and 11.1 (15.1 SD) individuals / site, respectively. Thirteen Potamilus capax were collected during this survey, with only 1 gravid female and 2 juveniles. Quantitative survey mean densities per site ranged from 1.0 to 1.9 mussels / m2 with an overall mean of 1.4 individuals / m2 (0.3 SD). A total of 7 Potamilus capax were observed during quantitative sampling. Community Numerical Standing Crop estimates ranged from 70 ± 30 to 22,986 ± 7,905 individuals. The data collected from this survey provide a valuable baseline on the mussel assemblages of an altered-alluvial river and the location and status of all S1, S2 and S3 species. This information is essential to the management of this imperiled fauna in the Tyronza River
Nanostructured Polymer Lithography for Photovoltaic Applications
The self-assembly of diblock copolymers into ordered domains holds great potential to furthering the efficiency of photovoltaic devices. Solutions containing polystyrene-block-poly(ethylene oxide) (PS-b-PEO) and poly(methyl methacrylate) (PMMA) were applied to silicon wafers from toluene solutions. Hexagonally ordered domains, with pore sizes ranging from 10-30 nm, were obtained by annealing films in solvent vapor, with the best results produced from a humidified benzene environment. Exposing the films to UV light cross-linked the polystyrene matrix and degraded the PMMA. Removal of the PMMA and PEO produced an ordered polystyrene template, which can be used for nanolithography for the deposition of quantum dots onto the wafers. Details of the film preparation, annealing times and conditions, and characterization will be presented
Single-source precursors for ternary chalcopyrite materials, and methods of making and using the same
A single source precursor for depositing ternary I-III-VI.sub.2 chalcopyrite materials useful as semiconductors. The single source precursor has the I-III-VI.sub.2 stoichiometry built into a single precursor molecular structure which degrades on heating or pyrolysis to yield the desired I-III-VI.sub.2 ternary chalcopyrite. The single source precursors effectively degrade to yield the ternary chalcopyrite at low temperature, e.g. below 500.degree. C., and are useful to deposit thin film ternary chalcopyrite layers via a spray CVD technique. The ternary single source precursors according to the invention can be used to provide nanocrystallite structures useful as quantum dots. A method of making the ternary single source precursors is also provided
A Large-Scale Synthesis and Characterization of Quaternary CuIn\u3csub\u3e\u3cem\u3ex\u3c/em\u3e\u3c/sub\u3eGa\u3csub\u3e1−\u3cem\u3ex\u3c/em\u3e\u3c/sub\u3eS\u3csub\u3e2\u3c/sub\u3e Chalcopyrite Nanoparticles via Microwave Batch Reactions
Various quaternary CuInxGa1−xS2 (0 ≤ x ≤ 1) chalcopyrite nanoparticles have been prepared from molecular single-source precursors via microwave decomposition. We were able to control the nanoparticle size, phase, stoichiometry, and solubility. Depending on the choice of surface modifiers used, we were able to tune the solubility of the resulting nanoparticles. This method has been used to generate up to 5 g of nanoparticles and up to 150 g from multiple batch reactions with excellent reproducibility. Data from UV-Vis, photoluminescence, X-ray diffraction, TEM, DSC/TGA-MS, and ICP-OES analyses have shown high reproducibility in nanoparticle size, composition, and bandgap
A Large-scale Synthesis and Characterization of Quaternary CuInₓGa₁₋ₓS₂ Chalcopyrite Nanoparticles via Microwave Batch Reactions
Various quaternary CuInxGa1-xS2 (0≤x≤1) chalcopyrite nanoparticles have been prepared from molecular single-source precursors via microwave decomposition. We were able to control the nanoparticle size, phase, stoichiometry, and solubility. Depending on the choice of surface modifiers used, we were able to tune the solubility of the resulting nanoparticles. This method has been used to generate up to 5g of nanoparticles and up to 150g from multiple batch reactions with excellent reproducibility. Data from UV-Vis, photoluminescence, X-ray diffraction, TEM, DSC/TGA-MS, and ICP-OES analyses have shown high reproducibility in nanoparticle size, composition, and bandgap
Acute Ingestion Of L-Arginine Alpha-Ketoglutarate Fails To Improve Muscular Strength And Endurance In ROTC Cadets
International Journal of Exercise Science 6(2) : 91-97, 2013. L-Arginine Alpha-Ketoglutarate (AAKG) is purported to stimulate the release of nitric oxide, and is suggested to facilitate muscular performance by increasing blood flow and increase oxygen and nutrient delivery to the working muscle. However, the ergogenic benefit of AAKG during resistance exercise has not been established. Therefore the purpose of this study was to investigate the effects of acute AAKG ingestion in active ROTC Cadets on measures of one-repetition maximal strength (1RM) and muscular endurance. Nineteen apparently healthy males ingested either AAKG (3 g) or a placebo 45 minutes prior to resistance testing in a randomized, double-blind crossover design. Initially, blood lactate (BLA) was obtained followed by 1RM testing on the barbell bench press and leg press. Upon determination of 1RM, participants completed repetitions to failure at 60% of 1RM. Blood lactate measures were immediately taken following the final repetition. Analysis revealed no significant differences between the conditions for bench press 1RM. Additionally, there were no differences between conditions for 1RM leg press, or for number of repetitions performed for the bench press or leg press. Blood lactate values did increase significantly from baseline to post-bench press in both the AAKG (t33 = 7.56, p \u3c 0.01) and placebo conditions (t33 = 8.45, p \u3c 0.01). Further, BLA lactate levels were also significantly greater post leg-press in the AAKG (t33 = 9.23, p \u3c 0.01) and placebo (t33 = 8.10, p \u3c 0.01). The results indicate that acute AAKG supplementation provides no ergogenic benefit in this study
Growth Curves of Four Species of Commercially Valuable Freshwater Mussels (Bivalva: Unionidae)
North American freshwater mussels (Bivalvia: Unionidae) have been exploited commercially for over 100 years and have been regulated using shell size limits and/or harvest seasons. Presently, freshwater mussels are considered a threatened faunal group in North America due to the large numbers of endangered, threatened or special concern species. Therefore, management of this fauna should emphasize their long-term sustainability. The objectives of this study were 1) to construct von Bertalanffy growth curves for selected commercially-most-valuable species, Fusconaia ebena, Megalonaias nervosa, Amblema plicata and Quadrula quadrula, from five rivers and two reservoirs, 2) to compare species-specific von Bertalanffy growth curves from different rivers and reservoirs, and 3) to provide information on size at onset of sexual maturity in F. ebena and A. plicata. Von Bertalanffy growth curves of four commercially valuable Ambleminae species were used in this study to compare drainage-specific growth. Growth curves for all four species investigated were significantly different between pairs of drainages. Approximate size at onset of sexual maturity was determined for Arkansas F. ebena and A. plicata. Von Bertalanffy growth curves, coupled with life history and population dynamics information, could be useful in assessing and determining national/state harvest sizes and/or drainage specific harvest sizes once annual growth line formation is confirmed
Spray Chemical Vapor Deposition of Single-Source Precursors for Chalcopyrite I-III-VI2 Thin-Film Materials
Thin-film solar cells on flexible, lightweight, space-qualified substrates provide an attractive approach to fabricating solar arrays with high mass-specific power. A polycrystalline chalcopyrite absorber layer is among the new generation of photovoltaic device technologies for thin film solar cells. At NASA Glenn Research Center we have focused on the development of new single-source precursors (SSPs) for deposition of semiconducting chalcopyrite materials onto lightweight, flexible substrates. We describe the syntheses and thermal modulation of SSPs via molecular engineering. Copper indium disulfide and related thin-film materials were deposited via aerosol-assisted chemical vapor deposition using SSPs. Processing and post-processing parameters were varied in order to modify morphology, stoichiometry, crystallography, electrical properties, and optical properties to optimize device quality. Growth at atmospheric pressure in a horizontal hotwall reactor at 395 C yielded the best device films. Placing the susceptor closer to the evaporation zone and flowing a more precursor-rich carrier gas through the reactor yielded shinier-, smoother-, and denser-looking films. Growth of (112)-oriented films yielded more Cu-rich films with fewer secondary phases than growth of (204)/(220)-oriented films. Post-deposition sulfur-vapor annealing enhanced stoichiometry and crystallinity of the films. Photoluminescence studies revealed four major emission bands and a broad band associated with deep defects. The highest device efficiency for an aerosol-assisted chemical vapor deposited cell was one percent
Development of Thin Solar Cells for Space Applications at NASA Glenn Research Center
NASA GRC Thin Film Solar Cell program is developing solar cell technologies for space applications which address two critical metrics: higher specific power (power per unit mass) and lower launch stowed volume. To be considered for space applications, an array using thin film solar cells must offer significantly higher specific power while reducing stowed volume compared to the present technologies being flown on space missions, namely crystalline solar cells. The NASA GRC program is developing single-source precursors and the requisite deposition hardware to grow high-efficiency, thin-film solar cells on polymer substrates at low deposition temperatures. Using low deposition temperatures enables the thin film solar cells to be grown on a variety of polymer substrates, many of which would not survive the high temperature processing currently used to fabricate thin film solar cells. The talk will present the latest results of this research program
Theory and experiment of differential acoustic resonance spectroscopy
Abstract Recent advances in Differential Acoustic Resonance Spectroscopy (DARS) techniques have given rise to applications in the field of poromechanics. We report on the experimental demonstration of bulk modulus measurements on poroelastic samples at sonic frequencies (1 kHz) with DARS. Normal mode perturbation is due to scattering of a foreign object (i.e., a rock sample) within an otherwise fluid-filled resonator. The perturbation theory on an elastic object determines its bulk modulus (inverse compressibility). The experimental bulk modulus of medium-to high-permeability (>10 mD) poroelastic samples is in agreement with predictions from quasi-static loading of a porous sphere using the Biot theory. This result demonstrates that pore fluid flow governs the dominant relaxation process of the rock during compression. For low-permeability samples (<10 mD), pressure equilibration via slow wave diffusion is limited, and only qualitative agreement is found between the upper bound (Gassmann undrained modulus) and the lower bound (volume-weighted compressibilities of the two constituents). DARS experiments, in conjunction with the poroelastic theory presented here, allow one to infer such rock physical properties as the effective bulk modulus at sonic frequencies
- …