426 research outputs found

    Workshop - Feminist Engineering Education: Building a Community of Practice

    Get PDF
    As a result of a series of papers and special sessions held at FIE between 2004 and 2008, a community of CSET educators interested in exploring feminist pedagogies has formed at FIE. Past participants in these sessions have expressed a desire to learn more about what makes a set of pedagogies feminist. At the same time, there has been an increase in the number of research papers at FIE that draw on feminist research methods or topics. This workshop is designed to meet the needs of members of the FIE community who have some experience with feminist pedagogies or research methods, and who are looking to develop intellectual relationships with others also working in engineering educational research. We will discuss the history of feminist education and feminist research methods in the US, including a connection to science and engineering education; participants will then work in small groups focusing on a sub-topic (feminist pedagogies, feminist research methods, and feminist research topics/content). We invite participants to bring part of a project (such as a syllabus or course plan, assignment, class or research project, research question or protocol) to this workshop; some time will be dedicated to the guided design/redesign of this project

    P.A.C.E.S. - A Study on Academic Integrity Among Engineering Undergraduates (Preliminary Conclusions)

    Get PDF
    Student academic dishonesty, commonly referred to as cheating, has become a serious problem at institutions of higher education. This is particularly true of engineering students who, according to previous research, are among the most likely to cheat in college. To investigate this concern, the authors have undertaken a research project on the Perceptions and Attitudes toward Cheating among Engineering Students (P.A.C.E.S.). The premise of this research is that a combination of pressures, rather than malicious motivations, account for most student cheating. The P.A.C.E.S study consists of a seven page, self-reported survey that investigates: (1) student definitions of academic dishonesty; (2) the magnitude of academic dishonesty among engineering undergraduates; (3) the correlations of academic dishonesty with theories of psychological, demographic and situational factors; and (4) student opinions on different approaches used to discourage academic dishonesty. The survey was administered to approximately 350 engineering and pre engineering undergraduates at 5 institutions, ranging from community colleges to a large research university. This paper will discuss some of the current results from the study as well as future goals, which include the refinement and further distribution of the survey instrument and the development of practical pedagogical methods to help students avoid the pressure of cheating and a better understanding of what students and faculty perceive as cheating

    Engineering Students' Perceptions of and Attitudes Towards Cheating

    Full text link
    Academic dishonesty has become a serious problem at institutions of higher learning. This is particularly true in engineering where, according to previous research, engineering undergraduates are among the most likely to cheat in college. To investigate this concern, the authors embarked on a research project whose goal was to develop a better understanding of what students and faculty perceive as cheating and to use this knowledge to help instructors and institutions increase the level of academic integrity among students. The primary instrument for this project was a seven‐page survey that was administered to 643 engineering and pre‐engineering undergraduates at eleven institutions, ranging from community colleges to large research universities. This manuscript provides an overview of the descriptive data from the PACES‐1 Survey organized around the following questions: what is student cheating and how often does it occur; why do students cheat; and what methods can be used to reduce or stop cheating?Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94862/1/j.2168-9830.2006.tb00891.x.pd

    The current state of research on academic dishonesty among engineering students

    Get PDF
    Academic dishonesty, or cheating, has become a serious problem at colleges and universities. This is particularly true of engineering students who, are among the most likely to cheat in college. The present paper will review the literature as a basis of broadly understanding academic dishonesty. This discussion will focus on three primary issues: (1) perceptions of and attitudes towards cheating, (2) reasons for student cheating, and (3) methods of promoting academic integrity. A current research project being developed by the authors will also be discussed. The premise of this research is that students are constantly making ethical judgements between the pressure to cheat and their own moral beliefs and social norms. The goal then is to uncover the reasons for and frequency of student cheating and to develop best practices for helping engineering students avoid this pressure. Particular topics of discussion will include a rationale for the research methodology, an outline of the questions we hope the survey will answer and a discussion of the ethical implications of conducting research of this type. The authors hope to present preliminary results of this study during the presentation of the paper.http://deepblue.lib.umich.edu/bitstream/2027.42/61396/1/2001_FIE_Harding_Final_Paper.pd

    Evaluation of two terpene-derived polymers as consolidants for archaeological wood

    Get PDF
    The evaluation of two terpene-derived polymers, termed TPA6 and TPA7, as possible consolidants for archaeological wood was carried out. The overall objective of this work was to expand the non-aqueous treatment toolkit which is available for the conservation of the highly degraded Oseberg collection. The wood artefacts which were found on the Oseberg ship were treated with alum in the early twentieth century, leading to the formation of sulfuric acid and to the precarious state that they are in today. Some of these artefacts cannot be treated with conventional aqueous consolidants, like polyethylene glycol, due to their highly degraded and/or reconstructed nature. This study sought to examine the level of penetration of the polymers in archaeological wood and to evaluate their consolidative effect. Both TPA6 and TPA7 were soluble in isopropanol and had a Mw of 3.9 and 4.2 kDa respectively. A number of archaeological wood specimens were immersed in solutions of these polymers. Their penetration and effects were evaluated using weight and dimensional change, colour change, infrared spectroscopy, scanning electron microscopy and hardness tests. Both polymers successfully penetrated the wood specimens, with a higher concentration found on the surface versus the core. Additionally, both polymers appeared to increase the hardness of the specimen surfaces. Increasing the polymer concentration and soaking time in future investigations could potentially facilitate the penetration to the wood cores

    Tert-butyldimethylsilyl chitosan synthesis and characterization by analytical ultracentrifugation, for archaeological wood conservation

    Get PDF
    The Oseberg ship is one of the most important archaeological testimonies of the Vikings. After excavation in 1904, the wooden gravegoods were conserved using alum salts. This resulted in extreme degradation of a number of the objects a hundred years later through acid depolymerisation of cellulose and lignin. The fragile condition of the artefacts requires a reconsolidation which has to be done avoiding water as solvent. We synthesized tert-butyldimethylsilyl (TBDMS) chitosan which is soluble in a 50:50 solution of ethyl acetate and toluene. Measurement of its molecular weight, to anticipate its penetration, provided a challenge as the density difference of the polymer and solvent was too small to provide adequate solute redistribution under a centrifugal field, so a two-stage process was implemented (i) determination of the weight-average molar mass of the aqueous soluble activated precursor, chitosan mesylate, Mw,mc using sedimentation equilibrium with the SEDFIT-MSTAR algorithm, and determination of the degree of polymerisation DP; (ii) measurement of the average degree of substitution DSTBDMS of the TBDMS group on each chitosan monosaccharide monomer unit using NMR, to augment the Mw,mc value to give the molar mass of the TBDMS-chitosan. For the preparation, we find Mw = 9.8 kg·mol−1, which is within the acceptable limit for penetration and consolidation of degraded wood. Future work will test this on archaeological wood from different sources

    Comparative hydrodynamic characterisation of two hydroxylated polymers based on α-pinene- or oleic acid-derived monomers for potential use as archaeological consolidants

    Get PDF
    The Oseberg Viking ship burial is one of the most extensive collections of Viking wooden artefacts ever excavated in Norway. In the early twentieth century, many of these artefacts were treated with alum in order to preserve them, inadvertently leading to their current degraded state. It is therefore crucial to develop new bioinspired polymers which could be used to conserve these artefacts and prevent further disintegration. Two hydroxylated polymers were synthesised (TPA6 and TPA7), using α-pinene- and oleic acid-derived monomers functionalised with an acrylate moiety. Characterisation using biomolecular hydrodynamics (analytical ultracentrifugation and high precision viscometry) has shown that these polymers have properties which would potentially make them good wood consolidants. Conformation analyses with the viscosity increment (ν) universal hydrodynamic parameter and ELLIPS1 software showed that both polymers had extended conformations, facilitating in situ networking when applied to wood. SEDFIT-MSTAR analyses of sedimentation equilibrium data indicates a weight average molar mass Mw of (3.9 ± 0.8) kDa and (4.2 ± 0.2) kDa for TPA6 and TPA7 respectively. Analyses with SEDFIT (sedimentation velocity) and MultiSig however revealed that TPA7 had a much greater homogeneity and a lower proportion of aggregation. These studies suggest that both these polymers—particularly TPA7—have characteristics suitable for wood consolidation, such as an optimal molar mass, conformation and a hydroxylated nature, making them interesting leads for further research

    Regular breakfast consumption and type 2 diabetes risk markers in 9- to 10-year-old children in the child heart and health study in England (CHASE): a cross-sectional analysis.

    Get PDF
    BACKGROUND: Regular breakfast consumption may protect against type 2 diabetes risk in adults but little is known about its influence on type 2 diabetes risk markers in children. We investigated the associations between breakfast consumption (frequency and content) and risk markers for type 2 diabetes (particularly insulin resistance and glycaemia) and cardiovascular disease in children. METHODS AND FINDINGS: We conducted a cross-sectional study of 4,116 UK primary school children aged 9-10 years. Participants provided information on breakfast frequency, had measurements of body composition, and gave fasting blood samples for measurements of blood lipids, insulin, glucose, and glycated haemoglobin (HbA1c). A subgroup of 2,004 children also completed a 24-hour dietary recall. Among 4,116 children studied, 3,056 (74%) ate breakfast daily, 450 (11%) most days, 372 (9%) some days, and 238 (6%) not usually. Graded associations between breakfast frequency and risk markers were observed; children who reported not usually having breakfast had higher fasting insulin (percent difference 26.4%, 95% CI 16.6%-37.0%), insulin resistance (percent difference 26.7%, 95% CI 17.0%-37.2%), HbA1c (percent difference 1.2%, 95% CI 0.4%-2.0%), glucose (percent difference 1.0%, 95% CI 0.0%-2.0%), and urate (percent difference 6%, 95% CI 3%-10%) than those who reported having breakfast daily; these differences were little affected by adjustment for adiposity, socioeconomic status, and physical activity levels. When the higher levels of triglyceride, systolic blood pressure, and C-reactive protein for those who usually did not eat breakfast relative to those who ate breakfast daily were adjusted for adiposity, the differences were no longer significant. Children eating a high fibre cereal breakfast had lower insulin resistance than those eating other breakfast types (p for heterogeneity <0.01). Differences in nutrient intakes between breakfast frequency groups did not account for the differences in type 2 diabetes markers. CONCLUSIONS: Children who ate breakfast daily, particularly a high fibre cereal breakfast, had a more favourable type 2 diabetes risk profile. Trials are needed to quantify the protective effect of breakfast on emerging type 2 diabetes risk. Please see later in the article for the Editors' Summary

    People of the British Isles: preliminary analysis of genotypes and surnames in a UK control population

    Get PDF
    There is a great deal of interest in fine scale population structure in the UK, both as a signature of historical immigration events and because of the effect population structure may have on disease association studies. Although population structure appears to have a minor impact on the current generation of genome-wide association studies, it is likely to play a significant part in the next generation of studies designed to search for rare variants. A powerful way of detecting such structure is to control and document carefully the provenance of the samples involved. Here we describe the collection of a cohort of rural UK samples (The People of the British Isles), aimed at providing a well-characterised UK control population that can be used as a resource by the research community as well as providing fine scale genetic information on the British population. So far, some 4,000 samples have been collected, the majority of which fit the criteria of coming from a rural area and having all four grandparents from approximately the same area. Analysis of the first 3,865 samples that have been geocoded indicates that 75% have a mean distance between grandparental places of birth of 37.3km, and that about 70% of grandparental places of birth can be classed as rural. Preliminary genotyping of 1,057 samples demonstrates the value of these samples for investigating fine scale population structure within the UK, and shows how this can be enhanced by the use of surnames
    corecore