8,949 research outputs found
A 10kW series resonant converter design, transistor characterization, and base-drive optimization
Transistors are characterized for use as switches in resonant circuit applications. A base drive circuit to provide the optimal base drive to these transistors under resonant circuit conditions is developed and then used in the design, fabrication and testing of a breadboard, spaceborne type 10 kW series resonant converter
NOSS altimeter algorithm specifications
A description of all algorithms required for altimeter processing is given. Each description includes title, description, inputs/outputs, general algebraic sequences and data volume. All required input/output data files are described and the computer resources required for the entire altimeter processing system were estimated. The majority of the data processing requirements for any radar altimeter of the Seasat-1 type are scoped. Additions and deletions could be made for the specific altimeter products required by other projects
An 8-cm ion thruster characterization
The performance of the Ion Auxiliary Propulsion System (IAPS) thruster was increased to thrust T = 32 mN, specific impulse I sub sp = 4062 s, and thrust-to-power ratio T/P = 33 mN/kW. This performance was obtained by increasing the discharge power, accelerating voltage, propellant flow rate, and chamber magnetic field. Adding a plenum and main vaporizer for propellant distribution was the only major change required in the thruster. The modified thruster characterization is presented. A cathode magnet assembly did not improve performance. A simplified power processing unit was designed and evaluated. This unit decreased the parts count of the IAPS power processing unit by a factor of ten
Studies of CMB structure at Dec=40. II: Analysis and cosmological interpretation
We present a detailed analysis of the cosmic microwave background structure
in the Tenerife Dec=+40 degrees data. The effect of local atmospheric
contributions on the derived fluctuation amplitude is considered, resulting in
an improved separation of the intrinsic CMB signal from noise. Our analysis
demonstrates the existence of common structure in independent data scans at 15
and 33 GHz. For the case of fluctuations described by a Gaussian
auto-correlation function, a likelihood analysis of our combined results at 15
and 33 GHz implies an intrinsic rms fluctuation level of 48^{+21}_{-15} uK on a
coherence scale of 4 degrees; the equivalent analysis for a
Harrison-Zel'dovitch model gives a power spectrum normalisation of Q_{rms-ps} =
22^{+10}_{-6} uK. The fluctuation amplitude is seen to be consistent at the 68%
confidence level with that reported for the COBE two-year data for primordial
fluctuations described by a power law model with a spectral index in the range
1.0 \le n \le 1.6. This limit favours the large scale CMB anisotropy being
dominated by scalar fluctuations rather than tensor modes from a gravitational
wave background. The large scale Tenerife and COBE results are considered in
conjunction with observational results from medium scale experiments in order
to place improved limits on the fluctuation spectral index; we find n=1.10 +/-
0.10 assuming standard CDM with H_{0}=50 kms^{-1}Mpc^{-1}.Comment: 10 pages LaTeX, including 8 PostScript figures. Accepted for
publication in MNRA
New Cosmological Structures on Medium Angular Scales Detected with the Tenerife Experiments
We present observations at 10 and 15 GHz taken with the Tenerife experiments
in a band of the sky at Dec.=+35 degrees. These experiments are sensitive to
multipoles in the range l=10-30. The sensitivity per beam is 56 and 20 microK
for the 10 and the 15 GHz data, respectively. After subtraction of the
prediction of known radio-sources, the analysis of the data at 15 GHz at high
Galactic latitude shows the presence of a signal with amplitude Delta Trms ~ 32
microK. In the case of a Harrison-Zeldovich spectrum for the primordial
fluctuations, a likelihood analysis shows that this signal corresponds to a
quadrupole amplitude Q_rms-ps=20.1+7.1-5.4 microK, in agreement with our
previous results at Dec.+=40 degrees and with the results of the COBE DMR.
There is clear evidence for the presence of individual features in the RA range
190 degrees to 250 degrees with a peak to peak amplitude of ~110 microK. A
preliminary comparison between our results and COBE DMR predictions for the
Tenerife experiments clearly indicates the presence of individual features
common to both. The constancy in amplitude over such a large range in frequency
(10-90 GHz) is strongly indicative of an intrinsic cosmological origin for
these structures.Comment: ApJ Letters accepted, 13 pages Latex (uses AASTEX) and 4 encapsulated
postscript figures
The Tenerife Cosmic Microwave Background Maps: Observations and First Analysis
The results of the Tenerife Cosmic Microwave Background (CMB) experiments are
presented. These observations cover 5000 and 6500 square degrees on the sky at
10 and 15 GHz respectively centred around Dec.~ +35 degrees. The experiments
are sensitive to multipoles l=10-30 which corresponds to the Sachs-Wolfe
plateau of the CMB power spectra. The sensitivity of the results are ~31 and
\~12 microK at 10 and 15 GHz respectively in a beam-size region (5 degrees
FWHM). The data at 15 GHz show clear detection of structure at high Galactic
latitude; the results at 10 GHz are compatible with these, but at lower
significance. A likelihood analysis of the 10 and 15 GHz data at high Galactic
latitude, assuming a flat CMB band power spectra gives a signal Delta
T_l=30+10-8 microK (68 % C.L.). Including the possible contaminating effect due
to the diffuse Galactic component, the CMB signal is Delta T_l=30+15-11 microK.
These values are highly stable against the Galactic cut chosen. Assuming a
Harrison-Zeldovich spectrum for the primordial fluctuations, the above values
imply an expected quadrupole Q_RMS-PS=20+10-7 microK which confirms previous
results from these experiments, and which are compatible with the COBE DMR.Comment: 17 pages, 7 figures. Submitted to Ap
Development of a low-maintenance measurement approach to continuously estimate methane emissions: a case study
The chemical breakdown of organic matter in landfills represents a significant source of methane gas (CH4). Current estimates suggest that landfills are responsible for between 3% and 19% of global anthropogenic emissions. The net CH4 emissions resulting from biogeochemical processes and their modulation by microbes in landfills are poorly constrained by imprecise knowledge of environmental constraints. The uncertainty in absolute CH4 emissions from landfills is therefore considerable. This study investigates a new method to estimate the temporal variability of CH4 emissions using meteorological and CH4 concentration measurements downwind of a landfill site in Suffolk, UK from July to September 2014, taking advantage of the statistics that such a measurement approach offers versus shorter-term, but more complex and instantaneously accurate, flux snapshots. Methane emissions were calculated from CH4 concentrations measured 700 m from the perimeter of the landfill with observed concentrations ranging from background to 46.4 ppm. Using an atmospheric dispersion model, we estimate a mean emission flux of 709 μg m−2 s−1 over this period, with a maximum value of 6.21 mg m−2 s−1, reflecting the wide natural variability in biogeochemical and other environmental controls on net site emission. The emissions calculated suggest that meteorological conditions have an influence on the magnitude of CH4 emissions. We also investigate the factors responsible for the large variability observed in the estimated CH4 emissions, and suggest that the largest component arises from uncertainty in the spatial distribution of CH4 emissions within the landfill area. The results determined using the low-maintenance approach discussed in this paper suggest that a network of cheaper, less precise CH4 sensors could be used to measure a continuous CH4 emission time series from a landfill site, something that is not practical using far-field approaches such as tracer release methods. Even though there are limitations to the approach described here, this easy, low-maintenance, low-cost method could be used by landfill operators to estimate time-averaged CH4 emissions and their impact downwind by simultaneously monitoring plume advection and CH4 concentrations
Elliptic aspects of statistical mechanics on spheres
Our earlier results on the temperature inversion properties and the
ellipticisation of the finite temperature internal energy on odd spheres are
extended to orbifold factors of odd spheres and then to other thermodynamic
quantities, in particular to the specific heat. The behaviour under modular
transformations is facilitated by the introduction of a modular covariant
derivative and it is shown that the specific heat on any odd sphere can be
expressed in terms of just three functions. It is also shown that the free
energy on the circle can be written elliptically.Comment: 22 pages. JyTe
- …