23 research outputs found
Chronic Fatigue Stress and Sudden Death
Stress refers to a series of neuroendocrine reactions, such as sympathetic nerve excitation and pituitary-adrenal cortex secretion increase, which occur when the body is stimulated by various stressors, and the changes of various functions and metabolism caused by these reactions. Chronic fatigue stress is a fatigue state caused by long-term physical and psychological stress. When the stress reaches a certain intensity or the individual is not well-tolerated, the body stability is impaired, resulting in various pathophysiological reactions leading to various diseases, such as stress hyperglycemia, stress cardiomyopathy, stress arrhythmia, stress ulcer hemorrhagic shock, or even stress ulcer hemorrhagic shock. Eventually lead to sudden death and other adverse events
Vp/Vs ratio of incoming sediments off Cascadia subduction zone from analysis of controlled-source multicomponent OBS records
Author Posting. © American Geophysical Union, 2020. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Solid Earth 125(6), (2020): e2019JB019239, doi:10.1029/2019JB019239.P‐to‐S‐converted waves observed in controlled‐source multicomponent ocean bottom seismometer (OBS) records were used to derive the Vp/Vs structure of Cascadia Basin sediments. We used P‐to‐S waves converted at the basement to derive an empirical function describing the average Vp/Vs of Cascadia sediments as a function of sediment thickness. We derived one‐dimensional interval Vp/Vs functions from semblance velocity analysis of S‐converted intrasediment and basement reflections, which we used to define an empirical Vp/Vs versus burial depth compaction trend. We find that seaward from the Cascadia deformation front, Vp/Vs structure offshore northern Oregon and Washington shows little variability along strike, while the structure of incoming sediments offshore central Oregon is more heterogeneous and includes intermediate‐to‐deep sediment layers of anomalously elevated Vp/Vs. These zones with elevated Vp/Vs are likely due to elevated pore fluid pressures, although layers of high sand content intercalated within a more clayey sedimentary sequence, and/or a higher content of coarser‐grained clay minerals relative to finer‐grained smectite could be contributing factors. We find that the proto‐décollement offshore central Oregon develops within the incoming sediments at a low‐permeability boundary that traps fluids in a stratigraphic level where fluid overpressure exceeds 50% of the differential pressure between the hydrostatic pressure and the lithostatic pressure. Incoming sediments with the highest estimated fluid overpressures occur offshore central Oregon where deformation of the accretionary prism is seaward vergent. Conversely, landward vergence offshore northern Oregon and Washington correlates with more moderate pore pressures and laterally homogeneous Vp/Vs functions of Cascadia Basin sediments.This research was funded by National Science Foundation (NSF) Grant OCE‐1657237 to J. P. C, OCE‐1657839 to A. F. A. and S. H., and OCE‐1657737 to S. M. C. Data used in this study were acquired with funding from NSF Grants OCE‐1029305 and OCE‐1249353. Data used in this research were provided by instruments from the Ocean Bottom Seismic Instrument Center (http://obsic.whoi.edu, formerly OBSIP), which is funded by the NSF. OBSIC/OBSIP data are archived at the IRIS Data Management Center (http://www.iris.edu) under network code X6 (https://doi.org/10.7914/SN/X6_2012). Data processing was conducted with Emerson‐Paradigm Software package Echos licensed to Woods Hole Oceanographic Institution under Paradigm Academic Software Program and MATLAB package SeismicLab of the University of Alberta, Canada (http://seismic-lab.physics.ualberta.ca), under GNU General Public License (MATLAB® is a registered trademark of MathWorks).2020-11-2
Seismic reflection imaging of the Juan de Fuca plate from ridge to trench : new constraints on the distribution of faulting and evolution of the crust prior to subduction
Author Posting. © American Geophysical Union, 2016. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Solid Earth 121 (2016): 1849–1872, doi:10.1002/2015JB012416.We present prestack time-migrated multichannel seismic images along two cross-plate transects from the Juan de Fuca (JdF) Ridge to the Cascadia deformation front (DF) offshore Oregon and Washington from which we characterize crustal structure, distribution and extent of faults across the plate interior as the crust ages and near the DF in response to subduction bending. Within the plate interior, we observe numerous small offset faults in the sediment section beginning 50–70 km from the ridge axis with sparse fault plane reflections confined to the upper crust. Plate bending due to sediment loading and subduction initiates at ~120–150 km and ~65–80 km seaward of the DF, respectively, and is accompanied by increase in sediment fault offsets and enhancement of deeper fault plane reflectivity. Most bend faulting deformation occurs within 40 km from the DF; on the Oregon transect, bright fault plane reflections that extend through the crust and 6–7 km into the mantle are observed. If attributed to serpentinization, ~0.12–0.92 wt % water within the uppermost 6 km of the mantle is estimated. On the Washington transect, bending faults are confined to the sediment section and upper-middle crust. The regional difference in subduction bend-faulting and potential hydration of the JdF plate is inconsistent with the spatial distribution of intermediate-depth intraslab seismicity at Cascadia. A series of distinctive, ridgeward dipping (20°–40°) lower crustal reflections are imaged in ~6–8 Ma crust along both transects and are interpreted as ductile shear zones formed within the ridge's accretionary zone in response to temporal variations in mantle upwelling, possibly associated with previously recognized plate reorganizations at 8.5 Ma and 5.9 Ma.NSF Grant Numbers: OCE 1029411, 10293052016-09-2
Recommended from our members
Architecture of on- and off-axis magma bodies at EPR 9°37–40′N and implications for oceanic crustal accretion
Crustal accretion at fast-spreading mid-ocean ridges is believed to be concentrated in a narrow zone up to a few kilometers wide centered beneath the ridge axis. However, there is increasing evidence for off-axis magmatism occurring beyond this narrow zone. Here, we present 3D multichannel seismic (MCS) images from the East Pacific Rise 9°37–40′N extending to 11 km on the ridge flanks. In the axial region, two offset axial magma bodies underlie a small ridge-axis discontinuity at ∼9°37′N, displaying an overlapping geometry similar to that of the seafloor structures above. On the ridge flanks, a series of off-axis magma lenses (OAML) are imaged: they are located 2–10 km from the ridge axis, at 700 to 1520 ms two-way travel time below seafloor (bsf) (∼1.6 to 4.5 km bsf), with variable areas ranging from 0.5 km2 to 5.2 km2. The largest body is centered 4 km east of the ridge axis and is composed of a large, continuous, flat-topped lens and a series of small, discontinuous, westward-dipping bodies along its western edge. The flat crest of the OAML lies at approximately the same depth beneath layer 2A as the axial magma lens and we infer that this OAML has formed by aggregation of ascending melts that accumulate at the base of the sheeted dike section. A cluster of reflections underlying the OAML at 1260–1510 ms bsf are observed that may be deeper lenses feeding melts to the upper lens. This largest OAML is associated with Moho travel time anomalies of 120–260 ms within a zone that extends up to 2 km from the edge of the OAML, suggesting a lower crust that is partially molten with lower crustal velocities reduced by 8–18% and/or thicker than normal by up to 1 km. Local volcanic edifices are found above two of the three OAMLs imaged in our study area and are inferred to be the eruptive products of the OAMLs. From the volume of these edifices and the Moho travel time anomalies we estimate the potential contribution of off-axis magmatism to the total volume of the crust to be ∼0.01–3%. The OAMLs imaged in our study area are present over roughly the same distance range as the zone of formation of near-axis seamounts. We speculate that OAMLs and the volcanic edifices found above them are small-scale manifestations of the off-axis magmatism that gives rise to near-axis seamounts
A 2-D tomographic model of the Juan de Fuca plate from accretion at axial seamount to subduction at the Cascadia margin from an active source ocean bottom seismometer survey
Author Posting. © American Geophysical Union, 2016. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Solid Earth 121 (2016): 5859–5879, doi:10.1002/2016JB013228.We report results from a wide-angle controlled source seismic experiment across the Juan de Fuca plate designed to investigate the evolution of the plate from accretion at the Juan de Fuca ridge to subduction at the Cascadia margin. A two-dimensional velocity model of the crust and upper mantle is derived from a joint reflection-refraction traveltime inversion. To interpret our tomography results, we first generate a plausible baseline velocity model, assuming a plate cooling model and realistic oceanic lithologies. We then use an effective medium theory to infer from our tomography results the extent of porosity, alteration, and water content that would be required to explain the departure from the baseline model. In crust of ages >1 Ma and away from propagator wakes and regions of faulting due to plate bending, we obtain estimates of upper crustal hydration of 0.5–2.1 wt % and find mostly dry lower crust and upper mantle. In sections of the crust affected by propagator wakes we find upper estimates of upper crustal, lower crustal, and upper mantle hydration of 3.1, 0.8, and 1.8 wt %, respectively. At the Cascadia deformation front, we find that the amount of water stored at uppermost mantle levels in the downgoing JdF plate is very limited (<0.3 wt %), with most of the water carried into the subduction zone being stored in the oceanic crust.NSF Grant Numbers: OCE-1029305, OCE-1029411, OCE-12493532017-02-1
Operating characteristics analysis and capacity configuration optimization of wind-solar-hydrogen hybrid multi-energy complementary system
Wind and solar energy are the important renewable energy sources, while their inherent natures of random and intermittent also exert negative effect on the electrical grid connection. As one of multiple energy complementary route by adopting the electrolysis technology, the wind-solar-hydrogen hybrid system contributes to improving green power utilization and reducing its fluctuation. Therefore, the moving average method and the hybrid energy storage module are proposed, which can smooth the wind-solar power generation and enhance the system energy management. Moreover, the optimization of system capacity configuration and the sensitive analysis are implemented by the MATLAB program platform. The results indicate that the 10-min grid-connected volatility is reduced by 38.7% based on the smoothing strategy, and the internal investment return rate can reach 13.67% when the electricity price is 0.04 $/kWh. In addition, the annual coordinated power and cycle proportion of the hybrid energy storage module are 80.5% and 90%, respectively. The developed hybrid energy storage module can well meet the annual coordination requirements, and has lower levelized cost of electricity. This method provides reasonable reference for designing and optimizing the wind-solar-hydrogen complementary system
Slow slip source characterized by lithological and geometric heterogeneity
Slow slip events (SSEs) accommodate a significant proportion of tectonic plate motion at subduction zones, yet little is known about the faults that actually host them. The shallow depth (<2 km) of well-documented SSEs at the Hikurangi subduction zone offshore New Zealand offers a unique opportunity to link geophysical imaging of the subduction zone with direct access to incoming material that represents the megathrust fault rocks hosting slow slip. Two recent International Ocean Discovery Program Expeditions sampled this incoming material before it is entrained immediately down-dip along the shallow plate interface. Drilling results, tied to regional seismic reflection images, reveal heterogeneous lithologies with highly variable physical properties entering the SSE source region. These observations suggest that SSEs and associated slow earthquake phenomena are promoted by lithological, mechanical, and frictional heterogeneity within the fault zone, enhanced by geometric complexity associated with subduction of rough crust
Recommended from our members
Accretion and Subduction of Oceanic Lithosphere: 2D and 3D Seismic Studies of Off-Axis Magma Lenses at East Pacific Rise 9°37-40'N Area...
Two thirds of the Earth's lithosphere is covered by the ocean. The oceanic lithosphere is formed at mid-ocean ridges, evolves and interacts with the overlying ocean for millions of years, and is eventually consumed at subduction zones. In this thesis, I use 2D and 3D multichannel seismic (MCS) data to investigate the accretionary and hydrothermal process on the ridge flank of the fast-spreading East Pacific Rise (EPR) at 9°37-40'N and the structure of the downgoing Juan de Fuca plate at the Cascadia subduction zone offshore Oregon and Washington.
Using 3D multichannel seismic (MCS) data, I image a series of off-axis magma lenses (OAML) in the middle or lower crust, 2 -10 km from the ridge axis at EPR 9°37-40'N. The large OAMLs are associated with Moho travel time anomalies and local volcanic edifices above them, indicating off-axis magmatism contributes to crustal accretion though both intrusion and eruption (Chapter 1). To assess the effect of OAMLs on the upper crustal structure, I conduct 2-D travel time tomography on downward continued MCS data along two across-axis lines above a prominent OAML in our study area. I find higher upper crustal velocity in a region ~ 2 km wide above this OAML compared with the surrounding crust. I attribute these local anomalies to enhanced precipitation of alteration minerals in the pore space of upper crust associated with high-temperature off-axis hydrothermal circulation driven by the OAML (Chapter 2).
At Cascadia, a young and hot end-member of the global subduction system, the state of hydration of the downgoing Juan de Fuca (JdF) plate is important to a number of subduction processes, yet is poorly known. As local zones of higher porosity and permeability, faults constitute primary conduits for seawater to enter the crust and potentially uppermost mantle. From pre-stack time migrated MCS images, I observe pervasive faulting in the sediment section up to 200 km from the deformation front. Yet faults with large throw and bright fault plane reflections that are developed under subduction bending are confined to a region 50-60 km wide offshore Oregon and less than ~45 km wide offshore Washington. Near the deformation front of Oregon margin, bending-related faults cut through the crust and extend to ~6-7 km in the mantle, whereas at Washington margin, faults are confined to upper and middle crust, indicating that Oregon margin has experienced more extensive bend faulting and related alteration. These observations argue against pervasive serpentinization in the slab mantle beneath Washington and suggest mechanisms other than dehydration embrittlement need to be considered to explain the intermediate depth earthquakes found along the Washington margin (Chapter 3). Using MCS images of a ~400 km along-strike profile ~10-15 km from the deformation front, I investigate the along-trench variation of the structure of downgoing JdF plate and its relation to the regional segmentation of Cascadia subduction zone. I observe that the propagator wakes within the oceanic plate are associated with anomalous basement topography and crustal reflectivity. Further landward, segment boundaries of ETS recurrence interval and relative timing align with the propagator traces within the subducting plate. I propose while the upper plate structure or composition may determine the threshold of fluid pore pressure at which ETS occur, the propagators may define barriers for ETS events that occur at the same time. I also observe a change in crustal structure near 45.8°N that is consistent with an increase in bend-faulting and hydration south of 45.8°N;. In addition, four previously mapped oblique strike-slip faults are associated with changes in Moho reflection, indicating that they transect the entire crust and may cause localized mantle hydration (Chapter 4)