74 research outputs found
Survei Demam Secara Massal Berhasil Mengendalikan Wabah Malaria Di Pulau Bungin Kabupaten Sumbawa Nusa Tenggara Barat : Pelajaran Tentang Pentingnya Deteksi Agresif Di Salah Satu Pulau Terpenting Di Dunia: The Mass Fever Survey Was A Success In Controling Outbreak Malaria In Bungin Island, Sumbawa District, West Nusa Tenggara : Lesson In The Importance Of Aggressive Detection On One Of The Most Populous Islands In The Worlds
Bungin Island is a very small island where population density is high, with a total population of 3,287 in a 2 kilometer-square area. The Annual Parasite Index (API) on Bungin Island in 2006 was 16,0 per thousand people. Outbreaks of malaria in Bungin Island are correlated with several controllable factors. The goal of this study is to aggressively detect and treat malaria, as well as to identify the factors that contribute to malaria outbreaks. Data was collected from the resident of Bungin Island who came to Sub-Primary Health Center Bungin Island in October 1, 2007. The data collection when outbreak malaria occurs, consisted of anamnesis, physical examination and test for type of malaria. A finger prick blood sample was collected and tested with rapid diagnostic test (RDT) for type of plasmodium. Treatment base on standard treatment for malaria from Indonesian Health Department was given to the subjects were malaria positive. The total 201 subjects was tested by RDT, in which 93 positive malaria (46,27%). Most of them were infected by Plasmodium vivax (97.85%) and only 2 subjects were infected by Plasmodium falciparum (2.15%). There were 23 subjects (24.27%) showed malaria positive without clinical symptoms. The subjects positive malaria with clinical symptoms, 8.57% were found to have spleenomegaly and 7.14% were found to have hepatomegaly. Incidence of malaria decrease siginifantly in few week after aggresive detection and appropriate treatment. A few years later, malaria incidence was disappeared. The incidence of malaria in Bungin Island was high when an outbreak occured. Aggressive detection with mass blood survey could find asymptomatic malaria in the population and appropriate treatment would decrease positive malaria until it disappeared
Isolation, synthesis and optimization of cyclopropanation process of 4-allyl-2-methoxyphenol
The synthesis of 4-((2,2-dichlorocyclopropyl)methyl)-2-methoxyphenol 2 have been accomplished by using cyclopropanation process and Reponse Surface Methodology [1,2]. This methodology was used to determine the optimal conditions for the cyclopropanation reaction of eugenol 1. The reaction time (X1) and the ratio of the reaction mixture’s solvent (X2) were the two investigated factors. The statistical analysis of this study indicates that both of these factors had significant effects on the cyclopropanation yield. The central composite design showed that polynomial regression models were in good agreement with the experimental results of the coefficient determination (0.95) of product 2 yield. The optimal conditions were 17.44 and 5.78 hours. In such condition, the predicted yield of the product 2 was 43.96%. Keywords: Eugenol; 4-((2,2-dichlorocyclopropyl)methyl)-2-methoxyphenol; Central composite design; Optimization experiment
Effect of indium doping on the electrical and structural properties of TiO2 thin films used in MOS devices
We investigated the effect of Indium (In) doping on the structural and electrical properties of Ti/Au/ TiO2:In/n-Si metal-oxide-semiconductor (MOS) devices. Sputtering grown TiO2 thin films on Si substrate were doped using two In-films with 15 nm and 50 nm thicknesses leading to two structures named Low Indium Doped (LID) sample and High Indium Doped (HID) sample, respectively. XRD analysis shows no diffraction pattern related to Indium indicating that In has been incorporated into the TiO2 lattice. Current-Voltage (I-V) characteristics show that rectification ratio at 2V is higher for HID sample than for LID sample. Evaluated barrier height, ϕB0 , decreased while the ideality factor, n, increased with decreasing temperature. Such behavior is ascribed to barrier inhomogeneity that was assumed to have a Gaussian Distribution (GD) of barrier heights at interface. Evidence of such GD was confirmed by plotting ϕB0versus n. High value of mean barrier ϕ̅B0 and lower value of standard deviation (σ) of HID structure are due to indium doping which increases the barrier homogeneities. Finally, estimated Richardson constants A* are in good agreement with theoretic values (112 A/cm2K2), particularly, for the HID structure
Cutoff value for predicting success in triathlon mixed team relay
IntroductionThe Mixed-Team-Relay (MTR) triathlon is an original race format present on the international scene since 2009, which became an Olympic event at the Tokyo 2020 Games. The aim of this study was to define the probabilities of reaching a victory, a podium, or a finalist rank in a relay triathlon, according to the position of any of the four relayers (Women/Men/Women/Men) during each of the four segments (leg) of the race.MethodsAll MTR results from the World Series, Continental Championships, World Championships from 2009 to 2021 and Tokyo 2020 Olympics have been collected. We calculated the set of probability frequencies of reaching a given final state, according to any transient state during the race. All results are compared with a V' Cramer method.ResultsThe frequency of winning is similar at the end of Leg 1 for TOP1 (first position) and TOP2-3 (second and third positions). Then, a difference in the winning-associated frequencies is first observed after the Bike stage of Leg 2, where 47% of TOP1 athletes will win, vs 13% of the TOP2-3.DiscussionThis difference continually increases until the end of the race. Legs 2 and 3 are preponderant on the outcome of the race, the position obtained by each triathlete, especially in swimming and cycling, greatly influences the final performance of the team. Leg 1 allows to maintain contact with the head of the race, while Leg 4 sets in stone the position obtained by the rest of the team
Efficacy of exome-targeted capture sequencing to detect mutations in known cerebellar ataxia genes
Study of alcohol fuel of butanol and ethanol effect on the compression ignition (CI) engine performance, combustion and emission characteristic
Diesel engine which is one of the larger contributors to total consumption for petroleum is an attractive power unit used widely in many fields. However, diesel engines are among the main contributors to air pollutions for the large amount of emissions, such as CO, CO2 and NOx lead to an adverse effect on human health. Many researches have been done to find alternative fuels that are clean and efficient. Biodiesel is preferred as an alternative source for diesel engine which produces lower emission of pollutants. This study has focused on the evaluation of diesel and alcohol-diesel fuel properties and also the performance, combustion and exhaust emission from diesel engine fuelled with diesel and alcohol. Butanol and ethanol is blend with diesel fuel at 1:9 ratio. There are three test fuel that is tested which Diesel (100% diesel), D90BU10 (10% Butanol and 90% diesel) and D90E10 (10% Ethanol and 90% diesel). The comparison between diesel and alcohol-diesel blend has been made in terms of fuel properties characterization, engine performance such as brake power (BP) and brake specific fuel consumption (BSFC) also the in cylinder maximum pressure characteristic. Thus, exhaust gas emission of CO, CO2, NOx and O2 emission also has been observed at constant load of 50% but in different operating engine speed (1100 rpm, 1400 rpm, 1700 rpm, 2000 rpm and 2300 rpm). The results show the addition of 10% of each butanol and ethanol to diesel fuel had decreased the fuel density about 0.3% to 0.5% compared to mineral diesel. In addition, viscosity and energy content are also decrease. The addition of 10% butanol had improved the fuel cetane number however the ethanol blends react differently. In term of engine performance, as the engine speed increased, BP output also increase respectively. Hence, the alcohol blends fuel generates lower BP compared to diesel, plus BSFC for all test fuel shows decreasing trend at low and medium speed, however increased gradually at higher engine speed. Thus, D90BU10 had higher BSFC compared to mineral diesel and D90E10. In general, the addition of alcohol blend in diesel fuel had increase the BSFC. In term of in cylinder pressure, as the engine speed is increased, the crank angle noted to move away from TDC for all test fuel. The maximum cylinder pressure increased at low and medium speed, but decrease in higher engine speed. The addition of 10% of butanol and ethanol in the mineral diesel decreased the maximum cylinder pressure. Meanwhile, O2 emission of D90E10 is higher compared to D90BU10 due to higher oxygen content found in ethanol. The CO2 emission of D90BU10 recorded higher compared to mineral diesel due to the high oxygen contents in the alcohol. CO emission of alcohol blend on the other hand had lower emission at higher engine speed compared to mineral diesel. As engine speed is increased, NOx emission of mineral diesel and D90E10 had decreased gradually. However, D90BU10 had increased of NOx emission at lower to medium engine speed, than gradually decreased at higher engine speed
Magnetic Properties of a Diluted Transverse Spin-1 Ising Nanocube with a Longitudinal Crystal-Field
In the present work, the effective field theory with correlations based on the probability distribution technique has been used to investigate the effect of the surface shell longitudinal cristal field on the magnetic properties of a diluted antiferromagnetic spin-1 Ising nanocube particle. This effect has also been studied on the hysteresis loops of the system. It is found that this parameter has a strong effect on the magnetization profiles, compensation temperature, coercive field and remanent magnetization
- …