Coatings for directional eutectics

Coating compositions were evaluated for oxidation protection of directionally solidified composite alloy NiTaC-13. These coatings included three NiCrAlY compositions (30-5-1, 25-10-1 and 20-15-1), two FeCrAlY compositions (30-5-1 and 25-10-1), a CoCrAlY composition (25-10-1), and one duplex coating, Ni-35Cr + Al. Duplicate pin samples of each composition were evaluated using two cyclic furnace oxidation tests of 100 hours at 871 C and 500 hours at 1093 C. The two best coatings were Ni-20Cr-15Al-lY and Ni-35Cr + Al. The two preferred coatings were deposited on pins and were evaluated in detail in .05 Mach cyclic burner rig oxidation to 1093 C. The NiCrAlY coating was protective after 830 hours of cycling, while the duplex coating withstood 630 hours. Test bars were coated and cycled for up to 500 hours. Tensile tests indicated no effect of coatings on strength. In 871 C air stress rupture, a degradation was observed for coated relative to bare material. The cycled NiCrAlY coating offered excellent protection with properties superior to the bare cycled NiTaC-13 in 1093 C air stress rupture

Physical and Electrochemical Area Determination of Electrodeposited Ni, Co, and NiCo Thin Films

The surface area of electrodeposited thin films of Ni, Co, and NiCo was evaluated using electrochemical double-layer capacitance, electrochemical area measurements using the [Ru(NH$_3$)$_6$]$^{3+}$/[Ru(NH$_3$)$_6$]$^{2+}$ redox couple, and topographic atomic force microscopy (AFM) imaging. These three methods were compared to each other for each composition separately and for the entire set of samples regardless of composition. Double-layer capacitance measurements were found to be positively correlated to the roughness factors determined by AFM topography. Electrochemical area measurements were found to be less correlated with measured roughness factors as well as applicable only to two of the three compositions studied. The results indicate that in situ double-layer capacitance measurements are a practical, versatile technique for estimating the accessible surface area of a metal sample.Comment: Accepted for publication in Nano Convergence, 6 figure

Material Morphology and energy barriers to electrical ageing

A distribution of the parameters representing activation energy of the ageing process within the Dissado-Montanari-Mazzanti (DMM) lifetime model has been shown to model experimental lifetime distributions of PET films well. The results imply small differences in the local environments of the moieties involved in the ageing process. Very small changes in the minimum activation energy values have a pronounced effect on the resultant lifetimes of polymer specimens. Changes in the distributions of activation energies with field and temperature can be explained by assuming the ageing process to be one whereby polymer segments on lamella surfaces crystallise to create free volume within the polymer

Modeling Concept Combinations in a Quantum-theoretic Framework

We present modeling for conceptual combinations which uses the mathematical formalism of quantum theory. Our model faithfully describes a large amount of experimental data collected by different scholars on concept conjunctions and disjunctions. Furthermore, our approach sheds a new light on long standing drawbacks connected with vagueness, or fuzziness, of concepts, and puts forward a completely novel possible solution to the 'combination problem' in concept theory. Additionally, we introduce an explanation for the occurrence of quantum structures in the mechanisms and dynamics of concepts and, more generally, in cognitive and decision processes, according to which human thought is a well structured superposition of a 'logical thought' and a 'conceptual thought', and the latter usually prevails over the former, at variance with some widespread beliefsComment: 5 pages. arXiv admin note: substantial text overlap with arXiv:1311.605

Ordinal Probit Functional Regression Models with Application to Computer-Use Behavior in Rhesus Monkeys

Research in functional regression has made great strides in expanding to non-Gaussian functional outcomes, however the exploration of ordinal functional outcomes remains limited. Motivated by a study of computer-use behavior in rhesus macaques (\emph{Macaca mulatta}), we introduce the Ordinal Probit Functional Regression Model or OPFRM to perform ordinal function-on-scalar regression. The OPFRM is flexibly formulated to allow for the choice of different basis functions including penalized B-splines, wavelets, and O'Sullivan splines. We demonstrate the operating characteristics of the model in simulation using a variety of underlying covariance patterns showing the model performs reasonably well in estimation under multiple basis functions. We also present and compare two approaches for conducting posterior inference showing that joint credible intervals tend to out perform point-wise credible. Finally, in application, we determine demographic factors associated with the monkeys' computer use over the course of a year and provide a brief analysis of the findings

The Guppy Effect as Interference

People use conjunctions and disjunctions of concepts in ways that violate the rules of classical logic, such as the law of compositionality. Specifically, they overextend conjunctions of concepts, a phenomenon referred to as the Guppy Effect. We build on previous efforts to develop a quantum model that explains the Guppy Effect in terms of interference. Using a well-studied data set with 16 exemplars that exhibit the Guppy Effect, we developed a 17-dimensional complex Hilbert space H that models the data and demonstrates the relationship between overextension and interference. We view the interference effect as, not a logical fallacy on the conjunction, but a signal that out of the two constituent concepts, a new concept has emerged.Comment: 10 page

Effects of classification context on categorization in natural categories

The patterns of classification of borderline instances of eight common taxonomic categories were examined under three different instructional conditions to test two predictions: first, that lack of a specified context contributes to vagueness in categorization, and second, that altering the purpose of classification can lead to greater or lesser dependence on similarity in classification. The instructional conditions contrasted purely pragmatic with more technical/quasi-legal contexts as purposes for classification, and these were compared with a no-context control. The measures of category vagueness were between-subjects disagreement and within-subjects consistency, and the measures of similarity based categorization were category breadth and the correlation of instance categorization probability with mean rated typicality, independently measured in a neutral context. Contrary to predictions, none of the measures of vagueness, reliability, category breadth, or correlation with typicality were generally affected by the instructional setting as a function of pragmatic versus technical purposes. Only one subcondition, in which a situational context was implied in addition to a purposive context, produced a significant change in categorization. Further experiments demonstrated that the effect of context was not increased when participants talked their way through the task, and that a technical context did not elicit more all-or-none categorization than did a pragmatic context. These findings place an important boundary condition on the effects of instructional context on conceptual categorization

Chemical kinetic and photochemical data for use in stratospheric modelling

An evaluated set of rate constants and photochemical cross sections were compiled for use in modelling stratospheric processes. The data are primarily relevant to the ozone layer, and its possible perturbation by anthropogenic activities. The evaluation is current to, approximately, January, 1979

Symmetry, bifurcation and stacking of the central configurations of the planar 1+4 body problem

In this work we are interested in the central configurations of the planar 1+4 body problem where the satellites have different infinitesimal masses and two of them are diametrically opposite in a circle. We can think this problem as a stacked central configuration too. We show that the configuration are necessarily symmetric and the other sattelites has the same mass. Moreover we proved that the number of central configuration in this case is in general one, two or three and in the special case where the satellites diametrically opposite have the same mass we proved that the number of central configuration is one or two saying the exact value of the ratio of the masses that provides this bifurcation.Comment: 9 pages, 2 figures. arXiv admin note: text overlap with arXiv:1103.627