Evaluate the compressive strength of cement paste modified with high reactivity attapulgite and affected by curing temperature

This study explores the influence of partial replacement of high reactivity Attapulgite (HRA) with cement by weight and evaluate the effect of curing temperatures on the compressive strength of modified cement paste (MCP). Recently, the Iraqi clay(Attapulgite) has been processed to pozzolanic material HRA, after extracting it from the quarry the clays crushed and grind to filler then specific the suitable calcinations temperature to make this clays as a pozolznic material. The possibility of replacing the Iraqi clays with cement can be reduce the cost and the impact of cement manufacturing on environment. In this study, three percentages of high reactivity Attapulgite used as a replacement 0, 10 and 20 % by weight of cement. The samples cured in four temperatures 20, 40, 60 and 80 °C. The samples with dimension 50x50x50 mm3 were casted and tested at ages 7, and 28 days. The test result shows that the compressive strength at early ages without HRA and cured at 20 °C were higher than samples with HRA. The maximum percentage of HRA as a replacement with cement has a reduced the compressive strength of the concrete. The result at 28 days for the samples with 10% of HRA at curing temperature 40 °C shows increased in compressive strength up to 60 °C, while when the samples were cured at curing temperature 80 °C shows decreased the compressive strength

Impact of opioid-free analgesia on pain severity and patient satisfaction after discharge from surgery: multispecialty, prospective cohort study in 25 countries

Background: Balancing opioid stewardship and the need for adequate analgesia following discharge after surgery is challenging. This study aimed to compare the outcomes for patients discharged with opioid versus opioid-free analgesia after common surgical procedures.Methods: This international, multicentre, prospective cohort study collected data from patients undergoing common acute and elective general surgical, urological, gynaecological, and orthopaedic procedures. The primary outcomes were patient-reported time in severe pain measured on a numerical analogue scale from 0 to 100% and patient-reported satisfaction with pain relief during the first week following discharge. Data were collected by in-hospital chart review and patient telephone interview 1 week after discharge.Results: The study recruited 4273 patients from 144 centres in 25 countries; 1311 patients (30.7%) were prescribed opioid analgesia at discharge. Patients reported being in severe pain for 10 (i.q.r. 1-30)% of the first week after discharge and rated satisfaction with analgesia as 90 (i.q.r. 80-100) of 100. After adjustment for confounders, opioid analgesia on discharge was independently associated with increased pain severity (risk ratio 1.52, 95% c.i. 1.31 to 1.76; P < 0.001) and re-presentation to healthcare providers owing to side-effects of medication (OR 2.38, 95% c.i. 1.36 to 4.17; P = 0.004), but not with satisfaction with analgesia (beta coefficient 0.92, 95% c.i. -1.52 to 3.36; P = 0.468) compared with opioid-free analgesia. Although opioid prescribing varied greatly between high-income and low- and middle-income countries, patient-reported outcomes did not.Conclusion: Opioid analgesia prescription on surgical discharge is associated with a higher risk of re-presentation owing to side-effects of medication and increased patient-reported pain, but not with changes in patient-reported satisfaction. Opioid-free discharge analgesia should be adopted routinely

The effect of using synthetic fibers on some properties of modified juss

This paper examines the mechanical properties of a composite material made of modified Iraqi gypsum (juss) reinforced with polypropylene fibers. The modified juss was prepared by adding two percentages of cement (5, 10) %. Two percentages of polypropylene fibers were used, to reinforce the modified juss (1, 2) %. The water/dry compound ratio used was equal to 0.53%. The composite was evaluated based on compressive strength, flexural strengths, absorption percentage, density, acoustic impedance, ultra - pulse velocity, longitudinal shrinkage and setting time tests. The results indicated that the inclusion of cement on to juss increases the compressive strength, absorption percentage, density, acoustic impedance, ultra - pulse velocity, longitudinal shrinkage and a reduction in flexural strength and setting time were observed by adding the cement. In addition, the inclusion of polypropylene fiber was significant in improving mechanical performance of the composite material, it shows a great improvement in longitudinal shrinkage, modulus of rupture and absorption percentages

The effect of using synthetic fibers on some properties of modified juss

This paper examines the mechanical properties of a composite material made of modified Iraqi gypsum (juss) reinforced with polypropylene fibers. The modified juss was prepared by adding two percentages of cement (5, 10) %. Two percentages of polypropylene fibers were used, to reinforce the modified juss (1, 2) %. The water/dry compound ratio used was equal to 0.53%. The composite was evaluated based on compressive strength, flexural strengths, absorption percentage, density, acoustic impedance, ultra - pulse velocity, longitudinal shrinkage and setting time tests. The results indicated that the inclusion of cement on to juss increases the compressive strength, absorption percentage, density, acoustic impedance, ultra - pulse velocity, longitudinal shrinkage and a reduction in flexural strength and setting time were observed by adding the cement. In addition, the inclusion of polypropylene fiber was significant in improving mechanical performance of the composite material, it shows a great improvement in longitudinal shrinkage, modulus of rupture and absorption percentages

Clinical and therapeutic characteristics of cancer patients in the southern region of Saudi Arabia : a cross-sectional study

Aims: Due to the continuous changes in modern lifestyle and the need to explore the effect of these changes on the risk of developing cancer, ongoing research on the epidemiology and characteristics of cancer patients is requested. This study explored the epidemiology of cancer, its characteristics, treatment patterns, and risk factors in the southern region of Saudi Arabia. Methods: A retrospective cross-sectional study was conducted using cancer patients’ medical records at Asir Central Hospital in the southern region of Saudi Arabia. Active patients’ records were extracted between January 2013 and December 2019. Results: A total of 2038 patients were identified during the study period, with a mean age of 60.9 (SD: 19.0) years. The patients had survived with their cancer for a median duration of 4 years (IQR: 2–6). Around 4.6% of the patients required ICU admission with a median period of 9 days (IQR: 5–14.75). The death rate during the study period was 10.9%. Around 20.8% of the cases were metastatic, of which 77.8% were at stage four of metastasis, and 19.7% of the patients were receiving chemotherapy for their disease. The most common types of cancer were malignant neoplasms of digestive organs, comprising 40.8% of the sample. Older age (60 years and above) and using specific chronic disease medications were predictors associated with a higher risk of death due to cancer (p < 0.05). Smoking history, using specific chronic disease medications, and having previous surgery were predictors associated with a higher risk of ICU admission (p < 0.05). Conclusion: Breast, colon, and liver cancers were the most prevalent in the southern region of Saudi Arabia. Several modifiable cancer risk factors were identified. The results of this study should support decision-makers in the initiation of programs for key modifiable risk factors that enhance lifestyle changes and reduce cancer risks