91 research outputs found
Applying Successive Wave Iterations to Evaluate Functions and Define Industrial Design Solutions
The search for competitive edges in the current industry has required conceptual changes in the policy for the development of new economically, environmentally and socially sustainable products. In this direction, assessing the functions of a product and associating them with its manufacturability aspects has been crucial for the cost reduction and for obtaining a more balanced design regarding the value that the customer perceives and the real cost of manufacturing each one of its functions. However, there are still no relevant studies that present the current state of the art regards methods that iteratively interrelate the integrated product development process phases. Firstly, this paper presents a systematic review and content analysis of recent research to define the current frontiers of study. As a second step, it is proposed a model oriented to balance between function value and solutions cost throughout the new products development. Then, to validate, the proposed model was applied to a real case of the consumer goods industry. Among the results, this chapter presents a report showing the relevance of the information collected, the feasibility of the method, its particularities, impacts and limitations
Effects of light intensity on the distribution of anthocyanins in Kalanchoe brasiliensis Camb. and Kalanchoe pinnata (Lamk.) Pers
This paper compares two medicinal species of Kalanchoe, which are often used interchangeably by the population, regarding the distribution of anthocyanins under the influence of four luminosity levels for 6 months. For the morphoanatomical analysis, the 6th stem node of each plant was sectioned. Usual histochemical tests revealed the presence of anthocyanins by cross sections of the stems, petioles and leaf blades. The petioles and leaf blades were submitted to the extraction with acidified methanol, and the anthocyanins were quantified by spectrophotometric readings. At the macroscopic level, it was noticed for both species a higher presence of anthocyanins in stems and petioles of plants under full sunlight. The microscopy of K. brasiliensis stems evidenced the deposition of anthocyanins in the subjacent tissue to the epidermis and cortex, which increased with light intensity. In K. pinnata a subepidermal collenchyma was observed, which interfered in the visualization of anthocyanins. In petioles and leaf blades of K. brasiliensis the deposition of anthocyanins was peripheral, and in K. pinnata it was also throughout the cortex. The quantification of anthocyanins in petioles showed in 70% of light higher averages than in 25%, but in leaf blades there were no significant results. This study contributes to the pharmacognosy of Kalanchoe and it is sustained by the description of flavonoids as biological markers of the genus.Este trabalho compara duas espécies medicinais de Kalanchoe utilizadas muitas vezes de forma indiferenciada pela população, quanto à distribuição de antocianinas sob influência de quatro níveis de luminosidade por 6 meses. Para a análise morfoanatômica foi seccionado o 6 º nó do caule de cada planta. Testes histoquímicos clássicos evidenciaram a presença de antocianinas em cortes transversais dos caules, pecíolos e lâminas foliares. Os pecíolos e lâminas foliares foram submetidos à extração com metanol acidificado e as antocianinas foram quantificadas através de leituras espectrofotométricas. Observou-se em nível macroscópico nas duas espécies, maior presença de antocianinas nos caules e pecíolos das plantas sob luz plena. A microscopia de caules de K. brasiliensis evidenciou a deposição de antocianinas no tecido subjacente à epiderme e córtex, o que aumentou com a intensidade luminosa. Em K. pinnata, observou-se colênquima subepidérmico, o que interferiu na visualização de antocianinas. Nos pecíolos e lâminas foliares de K. brasiliensis, a deposição de antocianinas foi periférica e em K. pinnata, se deu também por todo o córtex. A quantificação de antocianinas dos pecíolos mostrou, em 70% de luminosidade, teores superiores aos obtidos em 25%, porém nas lâminas foliares não foram obtidos resultados significativos. Este trabalho contribui para a farmacognosia de Kalanchoe e sustenta-se pela descrição de flavonóides como marcadores biológicos do gênero
Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 11 - Biting activity and blood-seeking parity of Anopheles (Kerteszia) in South-Eastern Brazil
Impacts of a liberalization in the USA market for Frozen Concentrated Orange Juice: why Florida's producers are so afraid?
Evaluation of demands of inclusion, exclusion and alteration of technologies in the Brazilian Health System submitted to the National Committee on Technology Incorporation
QUALIDADE TECNOLÓGICA DO CAFÉ ( Coffea arabica L.) PRÉ-PROCESSADO POR "VIA SECA" E "VIA ÚMIDA" AVALIADA POR MÉTODO QUÍMICO
Observações sobre atividade de mosquitos Culicidae em matas primitivas da planície e perfis epidemiológicos de vários ambientes no Vale do Ribeira, São Paulo, Brasil
Coupling dynamics of a geared multibody system supported by Elastohydrodynamic lubricated cylindrical joints
A comprehensive computational methodology to study the coupling dynamics of a geared multibody system supported by ElastoHydroDynamic (EHD) lubricated cylindrical joints is proposed throughout this work. The geared multibody system is described by using the Absolute-Coordinate-Based (ACB) method that combines the Natural Coordinate Formulation (NCF) describing rigid bodies and the Absolute Nodal Coordinate Formulation (ANCF) characterizing the flexible bodies. Based on the finite-short bearing approach, the EHD lubrication condition for the cylindrical joints supporting the geared system is considered here. The lubrication forces developed at the cylindrical joints are obtained by solving the Reynolds’ equation via the finite difference method. For the evaluation of the normal contact forces of gear pair along the Line Of Action (LOA), the time-varying mesh stiffness, mesh damping and Static Transmission Error (STE) are utilized. The time-varying mesh stiffness is calculated by using the Chaari’s methodology. The forces of sliding friction along the Off-Line-Of-Action (OLOA) are computed by using the Coulomb friction models with a time-varying coefficient of friction under the EHD lubrication condition of gear teeth. Finally, two numerical examples of application are presented to demonstrate and validate the proposed methodology.National Natural Science Foundations of China under Grant
11290151, 11221202 and 11002022, Beijing Higher
Education Young Elite Teacher Project under Grant YETP1201
Nutrição mineral de hortaliças: XXIX. absorção de macronutrientes por quatro cultivares de morangueiro (Fragaria spp.)
The aim of this work was to estimate the differences in growth (dry weight basis), nutrients uptake, fruits yield, total uptake and exportation of nutrients among several strawberry cultivars: Campinas (IAC-2712), Camanducaia (IAC-3530), Monte Alegre (IAC-3113) and SH-2. The experimental was carried out in the Escola Superior de Agricultura "Luiz de Queiroz", in field conditions, in 1975/76. The soil belongs to Terra Roxa Estruturada type, and "Luiz de Queiroz" serie. This soil has been cultivated for more than 25 years. The experimental design was that randomized blocks with four replications and analysed together following the design of split-plot. The soil of the plots were revolved to a deep of 12 cm following application of 10 kg organic matter/m². The fertilizers were applied in the groove and in the same amount for all cultivars: Ammonium sulfate (20% N), 10 g/m; triple superphosphate (20% P(2)0(5)) 10 g/m; Potassium cloride (60% K(2)0), 10 g/m. Therty days after planting, 10 g/plant of ammonium sulfate was applied. After 76 days from planting, the firsa sample was taken. Other samples were taken in equal intervals of 20 days, up to 216 days. When a decrease in fruitproduction was noted. The sample (plants) were divided in stems, leaves and fruits and chemical analysis were made for N, R, K, Ca, Mg e S. The variation on production (dry matter) nutrient uptake' and fruits yield, were obtained from data calculated by adjusted regression equation analysis. The maxima point from these equations were taken to show the total nutrient uptake. From the data obtained, the following conclusions could be drawn. Growth - The dry matter of stems, leaves and fruits were different among the cultivars. The production of dry matter by the stems and fruits were linnear for all cultivars up to 196 and 216 days. The highest productions on dry matter varied between 15 to 25 g and 12 to 20 g/plant. The maximum production of dry matter in the leaves among the cultivars varied between 20 to 30 g at 196 and 173 days respectivelly. The cultivars Campinas (IAC-2712) and Camanducaia (IAC-3530) produced more dry matter than SH-2 cultivar. Nutrient uptake -< The were differences on nutrient content in stems and leaves among cultivars (R, K, Ca, S, B) and in the fruits for N, R, K, Mg, S. The highest absorption of nutrients (days after planting) is shown in Table I. Yield - No significant difference in fruit production was observed among the cultivars. The highest yield among the cultivars showed a variation between 103 to 151 g per plant at the 207 and 207 days,Efetuou-se um estudo para avaliar a absorção e a extração dos macronutrientes nos seguintes cultivares de morangueiro: Campinas (IAC-2712); Camanducaia (IAC-3530) ; Monte Alegre (IAC-3113) e SH-2 em condições de campo. A instalação deu-se em um solo pertencente ao grande grupo Terra Roxa Estruturada, e à série "Luiz de Queiroz" cultivado intensivamente com hortaliças há mais de 25 anos, em Piracicaba-SP. A adubação aplicada foi uniforme para todos os cultivares. São apresentadas as concentrações dos macronutrientes em porcentagem nos seguintes órgãos: caules, folhas e frutos dos cultivares em função da idade (X) em dias. Constatou-se que os cultivares diferem quanto à absorção dos macronutrientes (R, K, Ca e S em relação a caules e folhas, e, N, R, K, Mg e S em relação aos frutos). Constatou-se também que os cultivares extraem totais diferentes de R, K, Ca, Mg e S sendo as extrações de R pelos cultivares menores do que as extrações de Ca e Mg, e no global as de Mg são equivalentes às de S. As quantidades máximas extraídas pelos cultivares para uma população de 150.000 plantas/ha foram : N - 192 kg; R - 24-50 kg; K - 133-244 kg; Ca - 76-116 kg; Mg - 30-34 kg; S - 13-27 kg. - A maior produção de matéria seca tanto nos órgãos como na planta inteira, ocorreu nos cultivares Campinas (IAC-2712) e Camanducaia (IAC-3530) e a menor produção verificou-se no cultivar SH-2. - Os cultivares diferem na absorção dos nutrientes: R, K, Ca, S para caules e folhas. E para frutos, N, R, K, Mg e S. - Os cultivares atingem o máximo da absorção de nutrientes nos órgãos nas seguintes épocas, em dias: - Os cultivares extraem e exportam totais diferentes de R, K, Ca e Mg. - Tanto os macronutrientes são extraídos em quantidades mais elevadas através das folhas e em menor proporção por caules e frutos. - As extrações de N, K e Ca são mais altas que aquelas dos demais macronutrientes. - As extrações de R pelos cultivares são menores que as de Ca e Mg, sendo ainda as extrações de Ca superiores às de Mg, enquanto no global as de Mg são equivalentes às de S. - A extração de macronutrientes verifica-se na ordem decrescente: K, N, Ca, Mg, S e P
- …