UNDERSTANDING THE EFFECTS OF INTERPERSONAL COMMUNICATION AND TASK DESIGN ON JOB PERFORMANCE AMONG EMPLOYEES IN THE MANUFACTURING COMPANY

on job performance among employees from the manufacturing industry. Methodology: The data is analyzed through a survey (questionnaire) from 152 employees in one of the manufacturing companies in Penang, Malaysia. Hypotheses for all direct effects between the predictors (eg. interpersonal communication and task design) and criterion (job performance) are tested using regression analysis.  Result: Results presented that employees in this company have a high level of job performance (µ = 3.70); interpersonal communication (µ =3.64) and task design (µ =3.66). Also, positive correlations are found between employees’ performance and interpersonal communication (r=.53, p=.00) and task design (r=.54, p=.00). Implications: Thus, this research provided a fruitful knowledge regarding the level of employees’ performance as well as their internal communication and task design; among employees in one of the manufacturing company in Malaysia

EFFECT OF TEMPERATURE DISTRIBUTION ON PREDICTING QUALITY OF MICROWAVE DEHYDRATED FOOD

ABSTRACT During food drying, many other changes occur simultaneously, resulting in an improved overall quality. Among the quality attributes, the structure and its corresponding color influence directly or indirectly other properties of food. In addition, these quality attributes are affected by process conditions, material components and the raw structure of the foodstuff. In this work, the temperature distribution within food materials during microwave drying has been taken into consideration to observe its role in color modification. In order to determine the temperature distribution of microwave-dried food (apple), a thermal imaging camera has been used. The image acquired from the digital camera has been analysed using image J software in order to get the color change of fresh and dried apple. The results show that temperature distribution plays an important role in determining the quality of the food. The thermal imaging camera was deployed to observe the temperature distribution within food materials during drying. It is clearly observed from the higher value of (E RGB =102) and the uneven color change that uneven temperature distribution can influence customer perceptions of the quality of dried food. Simulation of a mathematical model of temperature distribution during microwave drying can make it possible to predict the colour and texture of the microwaved food

THE INFLUENCES OF JOB PERFORMANCE, WORK-LIFE BALANCE AND ORGANIZATIONAL JUSTICE ON EMPLOYEES’ CAREER SATISFACTION

Purpose of study: This study is conducted to identify the relationships between job performance, work-life balance and organizational justice towards employee's career satisfaction from one of the manufacturing companies in the north of Malaysia. Methodology: The study is done by utilizing a random sample of 240 employees in the company. Type of investigation is a correlation study and it is cross-sectional on time horizon. The unit of analysis is an individual level; therefore, all employees in the company have chances to serve as the participants in this study. Data has been analysed from 148 respondents. Results: Results show significant and positive relationships between job performance, work-life balance and organizational justice towards employees' career satisfaction. Organizational justice is the most significant factor in career satisfaction in this study (β=.83, p=.00). Other factors such as job performance (β=.71, p=.00), and work-life balance (β=.71, p=.00) also positively correlated with employees’ career satisfaction. Implications/Applications: These significant results imply that managers should provide good elements of justice in the company to raise the level of their employee's career satisfaction. At the same time, the employees should maintain a higher level of job performance as well as to manage the good working life balance in them

Acute myocardial infarction: profile and management at a tertiary care hospital in Karachi

Objective: Acute Myocardial Infarction (AMI) is a rising epidemic in developing countries. While studies in the West have established the characteristics and management of AMI patients, comprehensive data reflecting these issues in the Pakistani subjects is scarce. This study examined the profile and management of AMI in patients hospitalized at a tertiary care hospital in Karachi, Pakistan.Methods: Three hundred forty four patients admitted in 1998 with the diagnosis of AMI met our inclusion criteria. Data on presentation, investigations, monitoring and therapy was obtained. Chi-square and t tests were used to analyze the data.Results: Out of 344 patients with AMI, 71% were males; 58% had a Q wave MI. Majority of the patients who presented within 2 hours of symptom onset (36%), had chest pain. Patients with dyspnea and no chest pain were more likely to present after 12 hours of the onset of symptoms. In-house mortality was found to be 10.8%. Low HDL and diabetes was associated with in-hospital complications. Twenty nine percent of patients were given thrombolytic therapy with a mean door-to-needle time of 1 hour 36 minutes; 33% of patients who were eligible of Streptokinase did not receive it. Cardiac catheterization was performed in 28% patients. Echocardiography and Exercise Tolerance Test, both under utilized, were performed in 67% and 16% of patients, respectively. Two hundred sixteen (70%) patients discharged from hospital were contacted via telephone and the 1-year mortality rate among them was 28%.CONCLUSION: The profile and management of AMI was in coherence with earlier, Western studies. Chest pain units need to be established in the Emergency Room. Patients should be risk stratified prior to discharge. Public awareness regarding primary and secondary prevention and symptoms of AMI needs to be increased

Templeting of Thin Films Induced by Dewetting on Patterned Surfaces

The instability, dynamics and morphological transitions of patterns in thin liquid films on periodic striped surfaces (consisting of alternating less and more wettable stripes) are investigated based on 3-D nonlinear simulations that account for the inter-site hydrodynamic and surface-energetic interactions. The film breakup is suppressed on some potentially destabilizing nonwettable sites when their spacing is below a characteristic lengthscale of the instability, the upper bound for which is close to the spinodal lengthscale. The thin film pattern replicates the substrate surface energy pattern closely only when, (a) the periodicity of substrate pattern matches closely with the characteristic lengthscale, and (b) the stripe-width is within a range bounded by a lower critical length, below which no heterogeneous rupture occurs, and an upper transition length above which complex morphological features bearing little resemblance to the substrate pattern are formed.Comment: 5 pages TeX (REVTeX 4), other comments: submitted to Phys. Rev.Let

An Approach to Utilize Crust Leather Scrapes, Dumped into the Land, for the Production of Environmental Friendly Leather Composite

Among all the natural fiber, leather fiber is one of the animal fibers which is bearing hydrophilic and hydrophobic functional group. Leather is tanned with different types of chemicals and scraped crust leather containing chemical are coming from the leather industry after preparing footwear and leather products. In this was varied from 100 ml to 40 ml and benzoyl peroxide was used as a radical initiator. Tensile strength (TS), Young modulus and elongation at break (Eb) were measured. Tensile strength found to increase from 9.80 Mpa to 10.85 MPa. Young's modulus was found highest in 70:5 ratios and it was 158.16 Mpa research an attempt was taken to prepare composite with waste scrape crust leather. Leather fiber reinforced polyester resin based composites were prepared by wet layup method. Polyester content in the composite.Scraped crust reinforced composite will reduce the environmental pollution. So it can be concluded that scraped crust leather reinforced composite found to have better result than matrix and reinforced material

The building blocks of community health systems: a systems framework for the design, implementation and evaluation of iCCM programs and community-based interventions

INTRODUCTION: Almost all sub-Saharan African countries have adopted some form of integrated community case management (iCCM) to reduce child mortality, a strategy targeting common childhood diseases in hard-to-reach communities. These programs are complex, maintain diverse implementation typologies and involve many components that can influence the potential success of a program or its ability to effectively perform at scale. While tools and methods exist to support the design and implementation of iCCM and measure its progress, these may not holistically consider some of its key components, which can include program structure, setting context and the interplay between community, human resources, program inputs and health system processes. METHODS: We propose a Global South-driven, systems-based framework that aims to capture these different elements and expand on the fundamental domains of iCCM program implementation. We conducted a content analysis developing a code frame based on iCCM literature, a review of policy documents and discussions with key informants. The framework development was guided by a combination of health systems conceptual frameworks and iCCM indices. RESULTS: The resulting framework yielded 10 thematic domains comprising 106 categories. These are complemented by a catalogue of critical questions that program designers, implementers and evaluators can ask at various stages of program development to stimulate meaningful discussion and explore the potential implications of implementation in decentralised settings. CONCLUSION: The iCCM Systems Framework proposed here aims to complement existing intervention benchmarks and indicators by expanding the scope and depth of the thematic components that comprise it. Its elements can also be adapted for other complex community interventions. While not exhaustive, the framework is intended to highlight the many forces involved in iCCM to help managers better harmonise the organisation and evaluation of their programs and examine their interactions within the larger health system

Generation of an ultrabroadband supercontinuum in the mid-infrared region using dispersion-engineered GeAsSe photonic crystal fiber

An ultrabroadband mid-infrared (MIR) region supercontinuum (SC) is demonstrated numerically through dispersion-engineered traditional chalcogenide (ChG) photonic crystal fiber (PCF). By varying structural parameters pitch (hole to hole spacing) and air-hole diameter to pitch ratio, a number of 10-mm-long hexagonal PCFs made employing GeAsSe ChG glass as a core and air-holes of hexagonal lattice running through their lengths as a cladding are optimized to predict an efficient mid-infrared region SC spectral emission by pumping them using a tunable pump source between 2.9 and 3.3 µm. Simulations are carried out using an ultrashort pump pulse of 100-fs duration with a low pulse peak powers of between 3 and 4 kW into the optimized designs. It is found through numerical analysis that efficient SC spectral broadening with flattened output can be obtained by increasing the PCF pitch rather than increasing the PCF cladding containing air-hole diameter although a larger nonlinear coefficient could be obtained through increasing air-hole diameter of an optimized design. Simulation results show that the SC spectra can be broadened up to 12.2 µm for a certain design with a peak power of 3 kW. Using a peak power of 4 kW, it is possible to obtain SC spectral broadening beyond 14 µm with an optimized design spanning the wavelength range from 1.8 to 14 µm which covers the electromagnetic spectrum required for MIR molecular fingerprint region applications such as sensing and biological imaging

Microencapsulation of fish oil using Hydroxypropyl methylcellulose as a carrier material by spray drying

Spray drying is an important method in the food industry for the production of encapsulated oil to improve the handling and flow properties of the powder. In this study, the effect of mixture of polymers on the encapsulation of fish oil by spray drying was investigated. Fish oil powder were produced using different ratios of mixtures of hydroxypropyl methylcellulose (HPMC) 15 cps and HPMC 5 cps. Scanning electron microscopy and the amount of extracted oil from the surface revealed that the formulation containing high concentration of polymer mixture provided the highest protective and prolonged effect on the covering of fish oil. The particle sizes of less than 60 μm were obtained for all the formulations. The powder density was very suitable, which improves the flowability of the powder. Microencapsulation efficiency (69.16–74.75%) and surface morphology of encapsulated oil showed that the stability was increased and hence increased its acceptability as alternative primary polymers

Identifying SARS-CoV-2 antiviral compounds by screening for small molecule inhibitors of Nsp14 RNA cap methyltransferase

The COVID-19 pandemic has presented itself as one of the most critical public health challenges of the century, with SARS-CoV-2 being the third member of the Coronaviridae family to cause a fatal disease in humans. There is currently only one antiviral compound, remdesivir, that can be used for the treatment of COVID-19. To identify additional potential therapeutics, we investigated the enzymatic proteins encoded in the SARS-CoV-2 genome. In this study, we focussed on the viral RNA cap methyltransferases, which play key roles in enabling viral protein translation and facilitating viral escape from the immune system. We expressed and purified both the guanine-N7 methyltransferase nsp14, and the nsp16 2′-O-methyltransferase with its activating cofactor, nsp10. We performed an in vitro high-throughput screen for inhibitors of nsp14 using a custom compound library of over 5000 pharmaceutical compounds that have previously been characterised in either clinical or basic research. We identified four compounds as potential inhibitors of nsp14, all of which also showed antiviral capacity in a cell-based model of SARS-CoV-2 infection. Three of the four compounds also exhibited synergistic effects on viral replication with remdesivir