1,726 research outputs found

    Tunable coupling to a mechanical oscillator circuit using a coherent feedback network

    Full text link
    We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and readout of the mechanical state. While previous electromechanical systems represent some compromise between efficient control and efficient readout of the mechanical state, as set by the electromagnetic decay rate, the tunable controller produces a closed-loop network that can be dynamically and continuously tuned between both extremes much faster than the mechanical response time. We demonstrate that the microwave decay rate may be modulated by at least a factor of 10 at a rate greater than 10410^4 times the mechanical response rate. The system is easy to build and suggests that some useful functions may arise most naturally at the network-level of modular, quantum electromagnetic devices.Comment: 11 pages, 6 figures, final published versio

    An inlet analysis for the NASA hypersonic research engine aerothermodynamic integration model

    Get PDF
    A theoretical analysis for the inlet of the NASA Hypersonic Research Engine (HRE) Aerothermodynamic Integration Model (AIM) has been undertaken by use of a method-of-characteristics computer program. The purpose of the analysis was to obtain pretest information on the full-scale HRE inlet in support of the experimental AIM program (completed May 1974). Mass-flow-ratio and additive-drag-coefficient schedules were obtained that well defined the range effected in the AIM tests. Mass-weighted average inlet total-pressure recovery, kinetic energy efficiency, and throat Mach numbers were obtained

    L’analyse des configurations du comportement industriel comme technique de prévision

    Get PDF
    One important tool for forecasting in the field of applied economics has been largely overlooked—the identification and analysis of patterns of industrial behavior. The following paper shows how the method of detecting behavior patterns, and the factors which control them, can be utilized for analyzing the past economic performance of an industry and for predicting its likely performance in the future.This analysis has also revealed that when controlled by the same factors, different industries follow the same behavior pattern. This being so, it becomes possible to group industries together and reclassify them on the basis of their common major business characteristics. Of these, one of the most important is their mode of competition. This reclassification also enables us to know when we can transfer experience between industries (within the same group) and when we cannot do this (between industries in different groups).At the present time, significant changes are occurring in the economic, organizational and technical climates. New economic goals appear necessary for Canada and these are suggested. These changes are altering the importance of the factors controlling industrial behavior. The nature of these changes is considered and applied to the case of the chemical industry in the next decade. The analysis suggests what new factors will control this industry, and the direction and nature of the likely changes in it. Given this, an estimate of the economic changes can be made.Analysis of behavior patterns is, therefore, a powerful and essential tool for estimating the future behavior of industries, and of groups of industries, in the economy

    Quantum interference between two single photons of different microwave frequencies

    Full text link
    We have measured quantum interference between two single microwave photons trapped in a superconducting resonator, whose frequencies are initially about 6 GHz apart. We accomplish this by use of a parametric frequency conversion process that mixes the mode currents of two cavity harmonics through a superconducting quantum interference device, and demonstrate that a two-photon entanglement operation can be performed with high fidelity.Comment: 6 pages and 3 figure

    L’analyse des configurations du comportement industriel comme technique de prévision

    Get PDF
    One important tool for forecasting in the field of applied economics has been largely overlooked—the identification and analysis of patterns of industrial behavior. The following paper shows how the method of detecting behavior patterns, and the factors which control them, can be utilized for analyzing the past economic performance of an industry and for predicting its likely performance in the future.

    Outbreak of acute hepatitis C following the use of anti-hepatitis C virus--screened intravenous immunoglobulin therapy

    Get PDF
    BACKGROUND and AIMS: Hepatitis C virus (HCV) infection has been associated with intravenous (IV) immunoglobulin (Ig), and plasma donations used to prepare IV Ig are now screened to prevent transmission. Thirty-six patients from the United Kingdom received infusions from a batch of anti-HCV antibody-screened intravenous Ig (Gammagard; Baxter Healthcare Ltd., Thetford, Norfolk, England) that was associated with reports of acute hepatitis C outbreak in Europe. The aim of this study was to document the epidemiology of this outbreak. METHODS: Forty-six patients from the United Kingdom treated with Gammagard (34 exposed and 12 unexposed to the batch) returned epidemiological questionnaires. RESULTS: Eighty-two percent of the exposed patients (28 of 34) became positive for HCV RNA. Eighteen percent of the patients (6 of 34) who had infusions with this batch tested negative for HCV RNA, but 2 of the patients had abnormal liver function and subsequently seroconverted to anti-HCV antibody positive. Twenty-seven percent of the patients (9 of 34) developed jaundice, and 79% (27 of 34) had abnormal liver transferase levels. Virus isolates (n=21), including an isolate from the implicated batch, were genotype 1a and virtually identical by sequence analysis of the NS5 region, consistent with transmission from a single source. CONCLUSIONS: Hepatitis C infection can be transmitted by anti-HCV-screened IV Ig. Careful documentation of IV Ig batch numbers and regular biochemical monitoring is recommended for all IV Ig recipients

    Mapping of serotype-specific, immunodominant epitopes in the NS-4 region of hepatitis C virus (HCV):use of type-specific peptides to serologically differentiate infections with HCV types 1, 2, and 3

    Get PDF
    The effect of sequence variability between different types of hepatitis C virus (HCV) on the antigenicity of the NS-4 protein was investigated by epitope mapping and by enzyme-linked immunosorbent assay with branched oligopeptides. Epitope mapping of the region between amino acid residues 1679 and 1768 in the HCV polyprotein revealed two major antigenic regions (1961 to 1708 and 1710 to 1728) that were recognized by antibody elicited upon natural infection of HCV. The antigenic regions were highly variable between variants of HCV, with only 50 to 60% amino acid sequence similarity between types 1, 2, and 3. Although limited serological cross-reactivity between HCV types was detected between peptides, particularly in the first antigenic region of NS-4, type-specific reactivity formed the principal component of the natural humoral immune response to NS-4. Type-specific antibody to particular HCV types was detected in 89% of the samples from anti-HCV-positive blood donors and correlated almost exactly with genotypic analysis of HCV sequences amplified from the samples by polymerase chain reaction. Whereas almost all blood donors appeared to be infected with a single virus type (97%), a higher proportion of samples (40%) from hemophiliacs infected from transfusion of non-heat-inactivated clotting factor contained antibody to two or even all three HCV types, providing evidence that long-term exposure may lead to multiple infection with different variants of HCV

    Evaluating the success of a marine protected area: A systematic review approach.

    Get PDF
    Marine Protected Areas (MPAs), marine areas in which human activities are restricted, are implemented worldwide to protect the marine environment. However, with a large proportion of these MPAs being no more than paper parks, it is important to be able to evaluate MPA success, determined by improvements to biophysical, socio-economic and governance conditions. In this study a systematic literature review was conducted to determine the most frequently used indicators of MPA success. These were then applied to a case study to demonstrate how success can be evaluated. The fifteen most frequently used indicators included species abundance, level of stakeholder participation and the existence of a decision-making and management body. Using the indicator framework with a traffic light system, we demonstrate how an MPA can be evaluated in terms of how well it performs against the indicators using secondary data from the literature. The framework can be used flexibly. For example, where no MPA data currently exist, the framework can be populated by qualitative data provided by local stakeholder knowledge. This system provides a cost-effective and straightforward method for managers and decision-makers to determine the level of success of any MPA and identify areas of weakness. However, given the variety of motivations for MPA establishment, this success needs to be determined in the context of the original management objectives of the MPA with greater weighting being placed on those objectives where appropriate

    Tripartite interactions between two phase qubits and a resonant cavity

    Full text link
    The creation and manipulation of multipartite entangled states is important for advancements in quantum computation and communication, and for testing our fundamental understanding of quantum mechanics and precision measurements. Multipartite entanglement has been achieved by use of various forms of quantum bits (qubits), such as trapped ions, photons, and atoms passing through microwave cavities. Quantum systems based on superconducting circuits have been used to control pair-wise interactions of qubits, either directly, through a quantum bus, or via controllable coupling. Here, we describe the first demonstration of coherent interactions of three directly coupled superconducting quantum systems, two phase qubits and a resonant cavity. We introduce a simple Bloch-sphere-like representation to help one visualize the unitary evolution of this tripartite system as it shares a single microwave photon. With careful control and timing of the initial conditions, this leads to a protocol for creating a rich variety of entangled states. Experimentally, we provide evidence for the deterministic evolution from a simple product state, through a tripartite W-state, into a bipartite Bell-state. These experiments are another step towards deterministically generating multipartite entanglement in superconducting systems with more than two qubits

    Decoherence, Autler-Townes effect, and dark states in two-tone driving of a three-level superconducting system

    Get PDF
    We present a detailed theoretical analysis of a multi-level quantum system coupled to two radiation fields and subject to decoherence. We concentrate on an effect known from quantum optics as the Autler-Townes splitting, which has been recently demonstrated experimentally [M. A. Sillanpaa et al., Phys. Rev. Lett. 103, 193601 (2009)] in a superconducting phase qubit. In the three-level approximation, we derive analytical solutions and describe how they can be used to extract the decoherence rates and to account for the measurement data. Better agreement with the experiment can be obtained by extending this model to five levels. Finally, we investigate the stationary states created in the experiment and show that their structure is close to that of dark states.Comment: 16 pages, 8 figure
    • …
    corecore