Morphological and mathematical analysis of asymmetrical fluvial pattern : a study case from the Ucayali river (Peru)

Nous avons étudié la disposition asymétrique du cours inférieur de l'Ucayali. Ces morphologies asymétriques sont observables à différentes échelles : bande enveloppe des méandres, forme du chenal, et taux de migration des méandres. Les relations qui existent entre l'orientation de la rivière, la direction du bord de la plaine alluviale et les failles néotectoniques suggèrent que la disposition de la rivière est contrôlée par des déformations actives. L'analyse mathématique des images permet une étude plus détaillée de la migration des méandres. Des portions des scènes SPOT XS initiales comprenant des morphologies fluviales élémentaires ont été délimitées. L'image a été traitée par des méthodes non linéaires, ouverture morphologique et reconstruction géodésique. Ensuite nous avons utilisé le traitement Adonis pour analyser les courbes restantes, qui correspondent aux éléments les plus importants des rides alluviales. Les traces de l'évolution des méandres sont ainsi obtenues, plus précisément et plus rapidement que par une observation visuelle. Les méandres situés du côté de l'escarpement bordant la plaine sont contrôlés par l'orientation de cet escarpement. Ce résultat est cohérent avec d'autres données néotectoniques, et suggère que la rivière est affectée par des déformations actives localisées le long de la marge de la plaine alluviale, au pied de l'escarpement qui la borde. (Résumé d'auteur

Assessment of an Average Controller for a DC/DC Converter via Either a PWM or a Sigma-Delta-Modulator

Sliding mode control is a discontinuous control technique that is, by its nature, appropriate for controlling variable structure systems, such as the switch regulated systems employed in power electronics. However, when designing control laws based on the average models of these systems a modulator is necessary for their experimental implementation. Among the most widely used modulators in power electronics are the pulse width modulation (PWM) and, more recently, the sigma-delta-modulator (Σ-Δ-modulator). Based on the importance of achieving an appropriate implementation of average control laws and the relevance of the trajectory tracking task in DC/DC power converters, for the first time, this research presents the assessment of the experimental results obtained when one of these controllers is implemented through either a PWM or a Σ-Δ-modulator to perform such a task. A comparative assessment based on the integral square error (ISE) index shows that, at frequencies with similar efficiency, the Σ-Δ-modulator provides a better tracking performance for the DC/DC Buck converter. In this paper, an average control based on differential flatness was used to perform the experiments. It is worth mentioning that a different trajectory tracking controller could have been selected for this research

Two-Stage Control Design of a Buck Converter/DC Motor System without Velocity Measurements via a Σ

This paper presents a two-stage control design for the “Buck power converter/DC motor” system, which allows to perform the sensorless angular velocity trajectory tracking task. The differential flatness property of the DC-motor model is exploited in order to propose a first-stage controller, which is designed to achieve the desired angular velocity trajectory. This controller provides the voltage profiles that must be tracked by the Buck converter. Then, a second-stage controller is meant to assure the aforementioned. This controller is based on flatness property of the Buck power converter model, which provides the input voltage to the DC motor. Due to the fact that the two-stage controller proposed uses the average model of the system, as a practical and effective implementation of this controller, a Σ − Δ-modulator is employed. Finally, in order to verify the control performance of this approach, numerical simulations are included

Porosity estimation of Phyllostachys edulis (Moso bamboo) by computed tomography and backscattered electron imaging

This study aims to investigate and quantify the porosity in the cross section of Phyllostachys edulis (Moso bamboo) culm wall. The porosity results are expected to be utilised in numerical study of heat and moisture transfer. Computed tomography (CT) and backscattered electron (BSE) imaging methods are utilised in this study because these two methods allow measurements of the anisotropic features of bamboo specimens. The results of these two methods can be represented as the function of the real dimension rather than the pore size distribution of the specimen. The specimens are obtained from eight different locations along the Moso bamboo culms. Both internodes and nodes specimens are measured in this study. The average porosity, standard deviation (SD) and coefficient of variation (COV) are calculated for BSE and CT results. Pearson product-moment correlation coefficient (PPMCC) is also calculated in this study to analyse the correlation between the BSE results and CT results. Typical porosity results from 400 sampling points and 10 portions average porosity are analysed in this study. The CT scanning results show similar trend with BSE results. The correlation relationship between BSE and CT results approaches moderate correlation level to strong correlation level. The average porosity of internode specimens is from 43.9 to 58.8 % by BSE measurement and from 44.9 to 63.4 % by CT measurement. The average porosity of node specimens is from 37.4 to 56.6 % by BSE measurement and from 32.1 to 62.2 % by CT measurement

Porosity estimation of (Moso bamboo) by computed tomography and backscattered electron imaging

This study aims to investigate and quantify the porosity in the cross section of Phyllostachys edulis (Moso bamboo) culm wall. The porosity results are expected to be utilised in numerical study of heat and moisture transfer. Computed tomography (CT) and backscattered electron (BSE) imaging methods are utilised in this study because these two methods allow measurements of the anisotropic features of bamboo specimens. The results of these two methods can be represented as the function of the real dimension rather than the pore size distribution of the specimen. The specimens are obtained from eight different locations along the Moso bamboo culms. Both internodes and nodes specimens are measured in this study. The average porosity, standard deviation (SD) and coefficient of variation (COV) are calculated for BSE and CT results. Pearson product-moment correlation coefficient (PPMCC) is also calculated in this study to analyse the correlation between the BSE results and CT results. Typical porosity results from 400 sampling points and 10 portions average porosity are analysed in this study. The CT scanning results show similar trend with BSE results. The correlation relationship between BSE and CT results approaches moderate correlation level to strong correlation level. The average porosity of internode specimens is from 43.9 to 58.8 % by BSE measurement and from 44.9 to 63.4 % by CT measurement. The average porosity of node specimens is from 37.4 to 56.6 % by BSE measurement and from 32.1 to 62.2 % by CT measurement