136,305 research outputs found
Domestic well vulnerability to drought duration and unsustainable groundwater management in California's Central Valley
Millions of Californians access drinking water via domestic wells, which are vulnerable to drought and unsustainable groundwater management. Groundwater overdraft and the possibility of longer drought duration under climate change threatens domestic well reliability, yet we lack tools to assess the impact of such events. Here, we leverage 943 469 well completion reports and 20 years of groundwater elevation data to develop a spatially-explicit domestic well failure model covering California's Central Valley. Our model successfully reproduces the spatial distribution of observed domestic well failures during the severe 2012-2016 drought (n = 2027). Next, the impact of longer drought duration (5-8 years) on domestic well failure is evaluated, indicating that if the 2012-2016 drought would have continued into a 6 to 8 year long drought, a total of 4037-5460 to 6538-8056 wells would fail. The same drought duration scenarios with an intervening wet winter in 2017 lead to an average of 498 and 738 fewer well failures. Additionally, we map vulnerable wells at high failure risk and find that they align with clusters of predicted well failures. Lastly, we evaluate how the timing and implementation of different projected groundwater management regimes impact groundwater levels and thus domestic well failure. When historic overdraft persists until 2040, domestic well failures range from 5966 to 10 466 (depending on the historic period considered). When sustainability is achieved progressively between 2020 and 2040, well failures range from 3677 to 6943, and from 1516 to 2513 when groundwater is not allowed to decline after 2020
The Star Cluster Population of M51: II. Age distribution and relations among the derived parameters
We use archival Hubble Space Telescope observations of broad-band images from the ultraviolet (F255W-filter) through the near infrared (NICMOS F160W-filter) to study the star cluster population of the interacting spiral galaxy M 51. We obtain age, mass, extinction, and effective radius estimates for 1152 star clusters in a region of ~7.3 × 8.1 kpc centered on the nucleus and extending into the outer spiral arms. In this paper we present the data set and exploit it to determine the age distribution and relationships among the fundamental parameters (i.e. age, mass, effective radius). We show the critical dependence of the age distribution on the sample selection, and confirm that using a constant mass cut-off, above which the sample is complete for the entire age range of interest, is essential. In particular, in this sample we are complete only for masses above 5× 104~M? for the last 1 Gyr. Using this dataset we find: i) that the cluster formation rate seems to have had a large increase ~50-70 Myr ago, which is coincident with the suggested second passage of its companion, NGC 5195; ii) a large number of extremely young (<10 Myr) star clusters, which we interpret as a population of unbound clusters of which a large majority will disrupt within the next ~10 Myr; and iii) that the distribution of cluster sizes can be well approximated by a power-law with exponent, -? = -2.2 ± 0.2, which is very similar to that of Galactic globular clusters, indicating that cluster disruption is largely independent of cluster radius. In addition, we have used this dataset to search for correlations among the derived parameters. In particular, we do not find any strong trends between the age and mass, mass and effective radius, nor between the galactocentric distance and effective radius. There is, however, a strong correlation between the age of a cluster and its extinction, with younger clusters being more heavily reddened than older clusters
Recommended from our members
Sensitivity analysis modelling for microscale multiphysics robust engineering design
Sensitivity Analysis (SA) plays an important role in the development of any practical engineering model. It can help to reveal the sources and mechanisms of variability that provide the key to understanding system uncertainty. SA can also be used to calibrate simulation models for closer agreement with experimental results. Robust Engineering Design (RED) seeks to exploit such knowledge in the search for design solutions that are optimal in terms of performance in the face of variability.
Microscale and multiphysics problems present challenges to modelling due to their complexity, which puts increased demands on computational methods. For example, in developing a model of a piezoelectric actuator, the process of calibration is prolonged by the number of parameters that are difficult to verify with the physical device.
In the approach presented in this paper, normalised sensitivity coefficients are determined directly and accurately using the governing finite element model formulation, offering an efficient means of identifying parameters that affect the output of the model, leading to increased accuracy and knowledge of system performance in the face of variability
Improvement of Fourier Polarimetry for applications in tomographic photoelasticity
The use of the Fourier Polarimetry method has been demonstrated to extract the three characteristic parameters in integrated photoelasticity. In contrast to the phase-stepping method, it has been shown that the Fourier method is more accurate. However, the Fourier method isn't very efficient as it requires that a minimum of nine intensity images be collected during a whole revolution of a polarizer while the phase-stepping method only needs six intensity images. In this paper the Fourier transformation is used to derive the expression for determination of the characteristic parameters. Four Fourier coefficients are clearly identified to calculate the three characteristic parameters. It is found that the angular rotation ratio could be set arbitrarily. The angular rotation ratio is optimized to satisfy the requirements of efficiency and proper data accuracy, which results in data collection about three times faster than the methods suggested by previous researchers. When comparing their performance in terms of efficiency and accuracy, the simulated and experimental results show that these angular rotation ratios have the same accuracy but the optimized angular rotation ratio is significantly faster. The sensitivity to noise is also investigated and further improvement of accuracy is suggested
Factorizations of Elements in Noncommutative Rings: A Survey
We survey results on factorizations of non zero-divisors into atoms
(irreducible elements) in noncommutative rings. The point of view in this
survey is motivated by the commutative theory of non-unique factorizations.
Topics covered include unique factorization up to order and similarity, 2-firs,
and modular LCM domains, as well as UFRs and UFDs in the sense of Chatters and
Jordan and generalizations thereof. We recall arithmetical invariants for the
study of non-unique factorizations, and give transfer results for arithmetical
invariants in matrix rings, rings of triangular matrices, and classical maximal
orders as well as classical hereditary orders in central simple algebras over
global fields.Comment: 50 pages, comments welcom
Flow-distributed spikes for Schnakenberg kinetics
This is the post-print version of the final published paper. The final publication is available at link.springer.com by following the link below. Copyright @ 2011 Springer-Verlag.We study a system of reaction–diffusion–convection equations which combine a reaction–diffusion system with Schnakenberg kinetics and the convective flow equations. It serves as a simple model for flow-distributed pattern formation. We show how the choice of boundary conditions and the size of the flow influence the positions of the emerging spiky patterns and give conditions when they are shifted to the right or to the left. Further, we analyze the shape and prove the stability of the spikes. This paper is the first providing a rigorous analysis of spiky patterns for reaction-diffusion systems coupled with convective flow. The importance of these results for biological applications, in particular the formation of left–right asymmetry in the mouse, is indicated.RGC of Hong Kon
A hybrid architecture for robust parsing of german
This paper provides an overview of current research on a hybrid and robust parsing architecture for the morphological, syntactic and semantic annotation of German text corpora. The novel contribution of this research lies not in the individual parsing modules, each of which relies on state-of-the-art algorithms and techniques. Rather what is new about the present approach is the combination of these modules into a single architecture. This combination provides a means to significantly optimize the performance of each component, resulting in an increased accuracy of annotation
Investigation of electrical properties for cantilever-based piezoelectric energy harvester
In the present era, the renewable sources of energy, e.g., piezoelectric materials are in great demand. They play a vital role in the field of micro-electromechanical systems, e.g., sensors and actuators. The cantilever-based piezoelectric energy harvesters are very popular because of their high performance and utilization. In this research-work, an energy harvester model based on a cantilever beam with bimorph PZT-5A, having a substrate layer of structural steel, was presented. The proposed energy scavenging system, designed in COMSOL Multiphysics, was applied to analyze the electrical output as a function of excitation frequencies, load resistances and accelerations. Analytical modeling was employed to measure the output voltage and power under pre-defined conditions of acceleration and load resistance. Experimentation was also performed to determine the relationship between independent and output parameters. Energy harvester is capable of producing the maximum power of 1.16 mW at a resonant frequency of 71 Hz under 1g acceleration, having load resistance of 12 k Omega. It was observed that acceleration and output power are directly proportional to each other. Moreover, the investigation conveys that the experimental results are in good agreement with the numerical results. The maximum error obtained between the experimental and numerical investigation was found to equal 4.3%
- …