35,882 research outputs found
Mix-and-match compatibility in asymmetric system markets
This paper shows that the private incentive for mix-and-match compatibility in system markets diverges from the social planner's incentive if competing suppliers are asymmetric in production cost or product quality. There can be too much or too little compatibility when the market is served by fully integrated system suppliers. Also, the market outcome involves socially too much incompatibility in the form of exclusive technological alliances when the market is composed of independent component suppliers. These results contrast with the standard one obtained in the symmetric setup and shed new light on public policy towards compatibility, technological alliances, and bundling practices in system markets
Method for the production of strongly adhesive films on titanium and titanium alloys with a metallization process
A process for the spray-application of a strongly adhesive, thick antifriction layer on titanium and titanium alloys is proposed. The titanium/titanium alloy component to be coated is first subjected to cleaning in a pickling bath with reducing additives and sand-blasting, then coated with an intermediate layer of nickel, after which the final layer is applied. The formation of TiNi at the interface ensures strong bonding of the antifriction layer
SFOLD - a program package for calculating two-body sfermion decays at full one-loop level in the MSSM
SFOLD (Sfermion Full One Loop Decays) is a Fortran program package for
calculating all sfermion two-body decay widths and the corresponding branching
ratios at full one-loop level within the MSSM. The package adopts the SUSY
Parameter Analysis convention and supports the SUSY Les Houches Accord input
and output format. With the SFOLD package we found non-negligible electroweak
corrections in bosonic decays of sbottom, stop and stau.Comment: 17 pages, 3 figure
Site-directed mutagenesis of the proposed catalytic amino acids of the Sindbis virus capsid protein autoprotease
The structural proteins of Sindbis virus are translated as a polyprotein precursor that is cleaved upon translation. The capsid protein is postulated to be a serine protease that releases itself from the N terminus of the nascent polyprotein by autoproteolysis. We have tested the importance in autoproteolysis of His-141, Asp-147, and Ser-215, previously postulated to form the catalytic triad of the protease, and of Asp-163. Several site-specific mutations were constructed at each of these positions, and the release of the capsid protein during translation in a cell-free system was examined. Because proteolysis occurs in cis during translation, the kinetics of release cannot be determined in this system, but the extent of proteolysis can be ascertained. Ser-215 appears to be the catalytic serine of the proteinase. Cys or Thr could substitute inefficiently for Ser-215, but substitution with Ala or Ile led to complete loss of activity. His-141 was also important for proteolysis. Substitution with Ala or Pro led to total loss of activity. Surprisingly, substitution with Arg resulted in complete proteolysis in vitro. Changes at the two Asp residues resulted in complete proteolysis of the substrate in vitro. All mutations that resulted in at least partial cleavage in vitro were incorporated into a full-length clone of Sindbis virus and an attempt was made to recover mutant virus. All changes tested were lethal for the virus except Asp-163 to Asn. Thus, production of infectious virus is either a more sensitive measure of the catalytic rate than the extent of in vitro cleavage, or these residues have necessary functions in addition to their possible role in proteolysis
Modelling of dimensional stability of fiber reinforced composite materials
Various methods of predicting the expansion and diffusion properties of composite laminates are reviewed. The prediction equations for continuous fiber composites can be applied to SMC composites as the effective fiber aspect ratio in the latter is large enough. The effect of hygrothermal expansion on the dimensional stability of composite laminates was demonstrated through the warping of unsymmetric graphite/epoxy laminates. The warping is very sensitive to the size of the panel, and to the moisture content which is in turn sensitive to the relative humidity in the environment. Thus, any long term creep test must be carried out in a humidity-controlled environment. Environmental effects in SMC composites and bulk polyester were studied under seven different environments. The SMC composites chosen are SMC-R25, SMC-R40, and SMC-R65
Field dependence of gaseous ion mobility: Test of approximate formulas
The accuracies of three approximate formulas were tested by comparison with special cases for which accurate results could be found. The Wannier free flight theory was found to be superior, and can be extended to yield a formula without further adjustable constants that gives an exact result at low electric fields and good results at medium and high fields. It is applicable for any ion neutral force law and mass ratio
Compression failure mechanisms in unidirectional composites
Compression failure mechanisms in unidirectional composites were examined. Possible failure modes of constituent materials are summarized and analytical models for fiber microbuckling are reviewed from a unified viewpoint. Due to deficiencies in available models, a failure model based on nonlinear properties and initial fiber curvature is proposed. The effect of constituent properties on composite compression behavior was experimentally investigated using two different graphite fibers and four different epoxy resins. The predominant microscopic scale failure mode was found to be shear crippling. In a soft resin, shear crippling was in the form of buckling of fibers on a microscopic scale. However, stiff resins failure was characterized by the formation of a kink band. For unidirectional laminates, compressive strength, and compressive modulus to a less extent, were found to increase with increasing magnitude of resin modulus. The change in compressive strength with resin modulus was predicted using the proposed nonlinear model
The sfermion mass spectrum of the MSSM at the one-loop level
The sfermion-mass spectrum of the minimal supersymmetric standard model is
investigated at the one-loop level. An on-shell scheme has been specified for
renormalization of the basic breaking parameters of the sfermionic sector.
Owing to SU(2)-invariance, the soft-breaking mass parameters of the left-chiral
scalar fermions of each isospin doublet are identical. Thus, one of the
sfermion-masses of each doublet can be expressed in terms of the other masses
and receives a mass shift at the one-loop level with respect to the
lowest-order value, which can be of GeV). Both strong and electroweak
contributions have been calculated for scalar quarks and leptons.Comment: 13 pages, 3 figures, version to appear in Eur. Phys. J.
- …