111 research outputs found

    Engineering direct-indirect band gap transition in wurtzite GaAs nanowires through size and uniaxial strain

    Full text link
    Electronic structures of wurtzite GaAs nanowires in the [0001] direction were studied using first-principles calculations. It was found that the band gap of GaAs nanowires experience a direct-to-indirect transition when the diameter of the nanowires is smaller than ~28 {\AA}. For those thin GaAs nanowires with an indirect band gap, it was found that the gap can be tuned to be direct if a moderate external uniaxial strain is applied. Both tensile and compressive strain can trigger the indirect-to-direct gap transition. The critical strains for the gap-transition are determined by the energy crossover of two states in conduction bands.Comment: 4 pages, 4 figure

    Strain Modulated Electronic Properties of Ge Nanowires - A First Principles Study

    Full text link
    We used density-functional theory based first principles simulations to study the effects of uniaxial strain and quantum confinement on the electronic properties of germanium nanowires along the [110] direction, such as the energy gap and the effective masses of the electron and hole. The diameters of the nanowires being studied are up to 50 {\AA}. As shown in our calculations, the Ge [110] nanowires possess a direct band gap, in contrast to the nature of an indirect band gap in bulk. We discovered that the band gap and the effective masses of charge carries can be modulated by applying uniaxial strain to the nanowires. These strain modulations are size-dependent. For a smaller wire (~ 12 {\AA}), the band gap is almost a linear function of strain; compressive strain increases the gap while tensile strain reduces the gap. For a larger wire (20 {\AA} - 50 {\AA}), the variation of the band gap with respect to strain shows nearly parabolic behavior: compressive strain beyond -1% also reduces the gap. In addition, our studies showed that strain affects effective masses of the electron and hole very differently. The effective mass of the hole increases with a tensile strain while the effective mass of the electron increases with a compressive strain. Our results suggested both strain and size can be used to tune the band structures of nanowires, which may help in design of future nano-electronic devices. We also discussed our results by applying the tight-binding model.Comment: 1 table, 8 figure

    Equivalent Kernels of Smoothing Splines in Nonparametric Regression for Clustered/Longitudinal Data

    Get PDF
    We compare spline and kernel methods for clustered/longitudinal data. For independent data, it is well known that kernel methods and spline methods are essentially asymptotically equivalent (Silverman, 1984). However, the recent work of Welsh, et al. (2002) shows that the same is not true for clustered/longitudinal data. First, conventional kernel methods fail to account for the within- cluster correlation, while spline methods are able to account for this correlation. Second, kernel methods and spline methods were found to have different local behavior, with conventional kernels being local and splines being non-local. To resolve these differences, we show that a smoothing spline estimator is asymptotically equivalent to a recently proposed seemingly unrelated kernel estimator of Wang (2003) for any working covariance matrix. To gain insight into this asymptotic equivalence, we show that both the seemingly unrelated kernel estimator and the smoothing spline estimator using any working covariance matrix can be obtained iteratively by applying conventional kernel or spline smoothing to pseudo-observations. This result allows us to study the asymptotic properties of the smoothing spline estimator by deriving its asymptotic bias and variance. We show that smoothing splines are asymptotically consistent for an arbitrary working covariance and have the smallest variance when assuming the true covariance. We further show that both the seemingly unrelated kernel estimator and the smoothing spline estimator are nonlocal (unless working independence is assumed) but have asymptotically negligible bias. Their finite sample performance is compared through simulations. Our results justify the use of efficient, non-local estimators such as smoothing splines for clustered/longitudinal data

    Static and dynamic material properties of CFRP/epoxy laminates

    Get PDF
    Carbon fiber reinforced polymer (CFRP) has been extensively used to strengthen structures owing to its outstanding mechanical properties. With an increasing threat from terrorist bombing attacks and accidental explosions, the application of CFRP has been extended to mitigate the effect of blast loading on structures. A better understanding of the dynamic material properties of CFRP/epoxy laminates at high strain rates is therefore needed for more reliable analysis and design of CFRP strengthened structures under dynamic loadings. In this study, the unidirectional tensile properties of CFRP (SikaWrap®-230C) and epoxy resin (Sikadur®-330) laminates is investigated experimentally over a wide range of strain rates. Quasi-static and low-speed tensile tests are conducted at strain rates varying from 7 × 10−5 s−1 to 0.07 s−1. Then, high-speed tensile tests are performed using a high-speed servo-hydraulic testing machine at strain rate from about 10 s−1 to 240 s−1. The testing results show that both the tensile strength and the stiffness of the CFRP/epoxy laminates are insensitive to loading speed when the strain rate is less than 50 s−1. However, when strain rate is over 50 s−1, both the tensile strength and the coupon stiffness increase with the increase of strain rate. High-speed camera images are used to assist inspecting the failure modes of CFRP/epoxy laminates. It is found that under high-strain rate tension CFRP/epoxy laminates fail differently from that at low-strain rate. The different failure mode is believed to contribute to the increment of laminate strength. The testing data are analyzed together with available testing results on CFRP/epoxy laminates at various strain rates. Empirical formulas of dynamic increase factor for CFRP material are derived for better prediction of material strength at various strain rates

    Vented Methane-air Explosion Overpressure Calculation—A simplified approach based on CFD

    Get PDF
    This paper presents new correlations developed through numerical simulations to estimate peak overpressures for vented methane-air explosions in cylindrical enclosures. A series of experimental tests are carried out first and the results are used to validate the numerical models developed with the commercial CFD software FLACS. More than 350 simulations consisting of 16 enclosure scales, 12 vent area to enclosure roof area ratios, 8 gas equivalence ratios and 9 vent activation pressures are then carried out to develop the Vented Methane-air Explosion Overpressure Calculation (VMEOC) correlations. Parameters associated with burning velocity and turbulence generation, oscillatory combustion and flame instabilities in vented gas explosion are taken into account in the development of new correlations. Comparing to CFD simulations, the VMEOC correlations provide a faster way to estimate the peak overpressure of a vented explosion. Additionally, it is proved in this study that the VMEOC correlations are easier to use and more accurate than the equations given in the up-to-date industrial standard- NFPA-68 2013 edition

    Aberrant lipid metabolism disrupts calcium homeostasis causing liver endoplasmic reticulum stress in obesity.

    Get PDF
    The endoplasmic reticulum (ER) is the main site of protein and lipid synthesis, membrane biogenesis, xenobiotic detoxification and cellular calcium storage, and perturbation of ER homeostasis leads to stress and the activation of the unfolded protein response. Chronic activation of ER stress has been shown to have an important role in the development of insulin resistance and diabetes in obesity. However, the mechanisms that lead to chronic ER stress in a metabolic context in general, and in obesity in particular, are not understood. Here we comparatively examined the proteomic and lipidomic landscape of hepatic ER purified from lean and obese mice to explore the mechanisms of chronic ER stress in obesity. We found suppression of protein but stimulation of lipid synthesis in the obese ER without significant alterations in chaperone content. Alterations in ER fatty acid and lipid composition result in the inhibition of sarco/endoplasmic reticulum calcium ATPase (SERCA) activity and ER stress. Correcting the obesity-induced alteration of ER phospholipid composition or hepatic Serca overexpression in vivo both reduced chronic ER stress and improved glucose homeostasis. Hence, we established that abnormal lipid and calcium metabolism are important contributors to hepatic ER stress in obesity

    Fetal Window of Vulnerability to Airborne Polycyclic Aromatic Hydrocarbons on Proportional Intrauterine Growth Restriction

    Get PDF
    Background: Although the entire duration of fetal development is generally considered a highly susceptible period, it is of public health interest to determine a narrower window of heightened vulnerability to polycyclic aromatic hydrocarbons (PAHs) in humans. We posited that exposure to PAHs during the first trimester impairs fetal growth more severely than a similar level of exposure during the subsequent trimesters. Methods: In a group of healthy, non-smoking pregnant women with no known risks of adverse birth outcomes, personal exposure to eight airborne PAHs was monitored once during the second trimester for the entire cohort (n = 344), and once each trimester within a subset (n = 77). Both air monitoring and self-reported PAH exposure data were used in order to statistically estimate PAH exposure during the entire gestational period for each individual newborn. Results: One natural-log unit increase in prenatal exposure to the eight summed PAHs during the first trimester was associated with the largest decrement in the Fetal Growth Ratio (FGR) (23%, 95 % Confidence Interval (CI), 25 to20%), birthweight (2105 g, 95 % CI, 2188 to 222 g), and birth length (20.78 cm, 95 % CI, 21.30 to 20.26 cm), compared to the unit effects of PAHs during the subsequent trimesters, after accounting for confounders. Furthermore, a unit exposure during the first trimester was associated with the largest elevation in Cephalization Index (head to weight ratio) (3 mm/g, 95 % CI, 1 to 5 mm/g). PAH exposure was not associated with evidence of asymmetric growth restriction in this cohort

    Do Market-Level Hospital and Physician Resources Affect Small Area Variation in Hospital Use?

    Full text link
    This study evaluates the effect of market-level physician and hospital resources on hospital use. It is anticipated that higher hospital discharges are associated with (1) greater hospital and physician resources, (2) more differentiated hospital and physician resources, and (3) higher levels of teaching intensity in the community. Data on 14 modified diagnostically related groups (DRGs) and 58 hospital market communities in Michigan are analyzed during a 7-year period. Findings indicate that physician resources, hospital resources, differentiation of hospital and physician resources, and teaching intensity contribute only modestly to discharges, holding constant the socioeconomic attributes of the community and adjusting for the variation in hospital use over time. With the inclusion of hospital and physician resource variables, socioeconomic factors remain important determinants of the variation across market communities. Findings are discussed in terms of their implications for health care organizations, managed care programs, and cost control efforts in general.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68450/2/6.pd

    Impact on Disease Development, Genomic Location and Biological Function of Copy Number Alterations in Non-Small Cell Lung Cancer

    Get PDF
    Lung cancer, of which more than 80% is non-small cell, is the leading cause of cancer-related death in the United States. Copy number alterations (CNAs) in lung cancer have been shown to be positionally clustered in certain genomic regions. However, it remains unclear whether genes with copy number changes are functionally clustered. Using a dense single nucleotide polymorphism array, we performed genome-wide copy number analyses of a large collection of non-small cell lung tumors (n = 301). We proposed a formal statistical test for CNAs between different groups (e.g., non-involved lung vs. tumors, early vs. late stage tumors). We also customized the gene set enrichment analysis (GSEA) algorithm to investigate the overrepresentation of genes with CNAs in predefined biological pathways and gene sets (i.e., functional clustering). We found that CNAs events increase substantially from germline, early stage to late stage tumor. In addition to genomic position, CNAs tend to occur away from the gene locations, especially in germline, non-involved tissue and early stage tumors. Such tendency decreases from germline to early stage and then to late stage tumors, suggesting a relaxation of selection during tumor progression. Furthermore, genes with CNAs in non-small cell lung tumors were enriched in certain gene sets and biological pathways that play crucial roles in oncogenesis and cancer progression, demonstrating the functional aspect of CNAs in the context of biological pathways that were overlooked previously. We conclude that CNAs increase with disease progression and CNAs are both positionally and functionally clustered. The potential functional capabilities acquired via CNAs may be sufficient for normal cells to transform into malignant cells
    • …
    corecore