Sample-specific and Ensemble-averaged Magnetoconductance of Individual Single-Wall Carbon Nanotubes

We discuss magnetotransport measurements on individual single-wall carbon nanotubes with low contact resistance, performed as a function of temperature and gate voltage. We find that the application of a magnetic field perpendicular to the tube axis results in a large magnetoconductance of the order of e^2/h at low temperature. We demonstrate that this magnetoconductance consists of a sample-specific and of an ensemble-averaged contribution, both of which decrease with increasing temperature. The observed behavior resembles very closely the behavior of more conventional multi-channel mesoscopic wires, exhibiting universal conductance fluctuations and weak localization. A theoretical analysis of our experiments will enable to reach a deeper understanding of phase-coherent one-dimensional electronic motion in SWNTs.Comment: Replaced with published version. Minor changes in tex

Spin-dependent Quantum Interference in Single-Wall Carbon Nanotubes with Ferromagnetic Contacts

We report the experimental observation of spin-induced magnetoresistance in single-wall carbon nanotubes contacted with high-transparency ferromagnetic electrodes. In the linear regime the spin-induced magnetoresistance oscillates with gate voltage in quantitative agreement with calculations based on a Landauer-Buttiker model for independent electrons. Consistent with this interpretation, we find evidence for bias-induced oscillation in the spin-induced magnetoresistance signal on the scale of the level spacing in the nanotube. At higher bias, the spin-induced magnetoresistance disappears because of a sharp decrease in the effective spin-polarization injected from the ferromagnetic electrodes.Comment: Replaced with published versio

Controlling spin in an electronic interferometer with spin-active interfaces

We consider electronic current transport through a ballistic one-dimensional quantum wire connected to two ferromagnetic leads. We study the effects of the spin-dependence of interfacial phase shifts (SDIPS) acquired by electrons upon scattering at the boundaries of the wire. The SDIPS produces a spin splitting of the wire resonant energies which is tunable with the gate voltage and the angle between the ferromagnetic polarizations. This property could be used for manipulating spins. In particular, it leads to a giant magnetoresistance effect with a sign tunable with the gate voltage and the magnetic field applied to the wire.Comment: 5 pages, 3 figures. to be published in Europhysics Letter

Coherent States Formulation of Polymer Field Theory

We introduce a stable and efficient complex Langevin (CL) scheme to enable the first numerical simulations of the coherent-states (CS) formulation of polymer field theory. In contrast with Edwards' well known auxiliary-field (AF) framework, the CS formulation does not contain an embedded non-linear, non-local functional of the auxiliary fields, and the action of the field theory has a fully explicit, finite-order and semi-local polynomial character. In the context of a polymer solution model, we demonstrate that the new CS-CL dynamical scheme for sampling fluctuations in the space of coherent states yields results in good agreement with now-standard AF simulations. The formalism is potentially applicable to a broad range of polymer architectures and may facilitate systematic generation of trial actions for use in coarse-graining and numerical renormalization-group studies.Comment: 14pages 8 figure

Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method

Different high-purity metal powders were successfully alloyed on to a nickel titanium (NiTi) shape memory alloy (SMA) with a 3 kW carbon dioxide (CO2) laser system. In order to produce an alloyed layer with complete penetration and acceptable composition profile, the Taguchi approach was used as a statistical technique for optimizing selected laser processing parameters. A systematic study of laser power, scanning velocity, and pre-paste powder thickness was conducted. The signal-to-noise ratios (S/N) for each control factor were calculated in order to assess the deviation from the average response. Analysis of variance (ANOVA) was carried out to understand the significance of process variables affecting the process effects. The Taguchi method was able to determine the laser process parameters for the laser surface alloying technique with high statistical accuracy and yield a laser surface alloying technique capable of achieving a desirable dilution ratio. Energy dispersive spectrometry consistently showed that the per cent by weight of Ni was reduced by 45 per cent as compared with untreated NiTi SMA when the Taguchi-determined laser processing parameters were employed, thus verifying the laser's processing parameters as optimum

On Measuring Fairness in Generative Models

Recently, there has been increased interest in fair generative models. In this work, we conduct, for the first time, an in-depth study on fairness measurement, a critical component in gauging progress on fair generative models. We make three contributions. First, we conduct a study that reveals that the existing fairness measurement framework has considerable measurement errors, even when highly accurate sensitive attribute (SA) classifiers are used. These findings cast doubts on previously reported fairness improvements. Second, to address this issue, we propose CLassifier Error-Aware Measurement (CLEAM), a new framework which uses a statistical model to account for inaccuracies in SA classifiers. Our proposed CLEAM reduces measurement errors significantly, e.g., 4.98% $\rightarrow$ 0.62% for StyleGAN2 w.r.t. Gender. Additionally, CLEAM achieves this with minimal additional overhead. Third, we utilize CLEAM to measure fairness in important text-to-image generator and GANs, revealing considerable biases in these models that raise concerns about their applications. Code and more resources: https://sutd-visual-computing-group.github.io/CLEAM/.Comment: Accepted in NeurIPS2

High-capacity quantum secure direct communication based on quantum hyperdense coding with hyperentanglement

We present a quantum hyperdense coding protocol with hyperentanglement in polarization and spatial-mode degrees of freedom of photons first and then give the details for a quantum secure direct communication (QSDC) protocol based on this quantum hyperdense coding protocol. This QSDC protocol has the advantage of having a higher capacity than the quantum communication protocols with a qubit system. Compared with the QSDC protocol based on superdense coding with $d$-dimensional systems, this QSDC protocol is more feasible as the preparation of a high-dimension quantum system is more difficult than that of a two-level quantum system at present.Comment: 5 pages, 2 figur

Impact of Uniaxial Pressure on Structural and Magnetic Phase Transitions in Electron-Doped Iron Pnictides

We use neutron resonance spin echo and Larmor diffraction to study the effect of uniaxial pressure on the tetragonal-to-orthorhombic structural ($T_s$) and antiferromagnetic (AF) phase transitions in iron pnictides BaFe$_{2-x}$Ni$_{x}$As$_{2}$ ($x=0,0.03,0.12$), SrFe$_{1.97}$Ni$_{0.03}$As$_2$, and BaFe$_2$(As$_{0.7}$P$_{0.3}$)$_2$. In antiferromagnetically ordered BaFe$_{2-x}$Ni$_{x}$As$_{2}$ and SrFe$_{1.97}$Ni$_{0.03}$As$_2$ with $T_N$ and $T_s$ ($T_N\leq T_s$), a uniaxial pressure necessary to detwin the sample also increases $T_N$, smears out the structural transition, and induces an orthorhombic lattice distortion at all temperatures. By comparing temperature and doping dependence of the pressure induced lattice parameter changes with the elastoresistance and nematic susceptibility obtained from transport and ultrasonic measurements, we conclude that the in-plane resistivity anisotropy found in the paramagnetic state of electron underdoped iron pnictides depends sensitively on the nature of the magnetic phase transition and a strong coupling between the uniaxial pressure induced lattice distortion and electronic nematic susceptibility.Comment: 18 pages, 15 figure

A Simultaneous Quantum Secure Direct Communication Scheme between the Central Party and Other M Parties

We propose a simultaneous quantum secure direct communication scheme between one party and other three parties via four-particle GHZ states and swapping quantum entanglement. In the scheme, three spatially separated senders, Alice, Bob and Charlie, transmit their secret messages to a remote receiver Diana by performing a series local operations on their respective particles according to the quadripartite stipulation. From Alice, Bob, Charlie and Diana's Bell measurement results, Diana can infer the secret messages. If a perfect quantum channel is used, the secret messages are faithfully transmitted from Alice, Bob and Charlie to Diana via initially shared pairs of four-particle GHZ states without revealing any information to a potential eavesdropper. As there is no transmission of the qubits carrying the secret message in the public channel, it is completely secure for the direct secret communication. This scheme can be considered as a network of communication parties where each party wants to communicate secretly with a central party or server.Comment: 4 pages, no figur