24 research outputs found
Sustainable Materials: Production Methods and End-of-life Strategies
All three natural polymers of biomass and the monomer platforms derived from them present multiple avenues to develop products from specialty to bulk markets, which could serve as entry points into the industry for bio based sustainable materials. However, several roadblocks still exist in the pathway of technology development of these materials due to challenges related to cost-competitiveness, scalability, performance and sustainability. This review outlines these major technical challenges as four key checkpoints (cost-competitive, scalability, sustainability, performance) to be addressed for successful market entry of a new sustainable material
Improving Heterogeneous Catalyst Stability for Liquid-phase Biomass Conversion and Reforming
Biomass is a possible renewable alternative to fossil carbon sources. Today, many bio-resources can be converted to direct substitutes or suitable alternatives to fossil-based fuels and chemicals. However, catalyst deactivation under the harsh, often liquid-phase reaction conditions required for biomass treatment is a major obstacle to developing processes that can compete with the petrochemical industry. This review presents recently developed strategies to limit reversible and irreversible catalyst deactivation such as metal sintering and leaching, metal poisoning and support collapse. Methods aiming to increase catalyst lifetime include passivation of low-stability atoms by overcoating, creation of microenvironments hostile to poisons, improvement of metal stability, or reduction of deactivation by process engineering
Densely Packed, Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction
Controlling the selectivity in electrochemical CO2 reduction is an unsolved challenge. While tin (Sn) has emerged as a promising nonâprecious catalyst for CO2 electroreduction, most Snâbased catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO2 reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultraâsmall size of the nanoparticles (2.6â
nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix
Slowing the Kinetics of Alumina Sol-Gel Chemistry for Controlled Catalyst Overcoating and Improved Catalyst Stability and Selectivity
Catalyst overcoating is an emerging approach to engineer surface functionalities on supported metal catalyst and improve catalyst selectivity and durability. Alumina deposition on high surface area material by solâgel chemistry is traditionally difficult to control due to the fast hydrolysis kinetics of aluminumâalkoxide precursors. Here, solâgel chemistry methods are adapted to slow down these kinetics and deposit nanometerâscale alumina overcoats. The alumina overcoats are comparable in conformality and thickness control to overcoats prepared by atomic layer deposition even on high surface area substrates. The strategy relies on regulating the hydrolysis/condensation kinetics of Al(sBuO)3 by either adding a chelating agent or using nonhydrolytic solâgel chemistry. These two approaches produce overcoats with similar chemical properties but distinct physical textures. With chelation chemistry, a mild method compatible with supported base metal catalysts, a conformal yet porous overcoat leads to a highly sinteringâresistant Cu catalyst for liquidâphase furfural hydrogenation. With the nonhydrolytic solâgel route, a denser Al2O3 overcoat can be deposited to create a high density of Lewis acidâmetal interface sites over Pt on mesoporous silica. The resulting material has a substantially increased hydrodeoxygenation activity for the conversion of ligninâderived 4âpropylguaiacol into propylcyclohexane with up to 87% selectivity
Controlled deposition of titanium oxide overcoats by non-hydrolytic sol gel for improved catalyst selectivity and stability
Advances in the synthetic control of surface nanostructures could improve the activity, selectivity and stability of heterogeneous catalysts. Here, we present a technique for the controlled deposition of TiO2 overcoats based on non-hydrolytic sol-gel chemistry. Continuous injection of Ti(iPrO)4 and TiCl4 mixtures led to the formation of conformal TiO2 overcoats with a growth rate of 0.4âŻnm/injected monolayer on several materials including high surface area SBA-15. Deposition of TiO2 on SBA-15 generated medium-strength Lewis acid sites, which catalyzed 1-phenylethanol dehydration at high selectivities and decreased deactivation rates compared to typically used HZSM-5. When supported metal nanoparticles were similarly overcoated, the intimate contact between the metal and acid sites at the support-overcoat interface significantly increased propylcyclohexane selectivity during the deoxygenation of lignin-derived propyl guaiacol (89% at 90% conversion compared to 30% for the uncoated catalyst). For both materials, the surface reactivity could be tuned with the overcoat thickness
Prominent role of mesopore surface area and external acid sites for the synthesis of polyoxymethylene dimethyl ethers (OME) on a hierarchical H-ZSM-5 zeolite
H-ZSM-5 zeolite has been shown to be an active catalyst for the synthesis of polyoxymethylene dimethyl ethers (OME). However, we demonstrated â by passivation of the zeolite's external surface â that the reaction rate is limited due to severe internal diffusion limitations of the reactants and products. External acid sites thus played a more prominent role in the observed overall reaction rate compared to the acid sites in the zeolite's micropores. Through controlled introduction of an intercrystalline network of mesopores the zeolite's activity was significantly enhanced by allowing a more significant part of the reaction to take place within the zeolite's micropores. By optimising alkaline treatment and consequent acid wash of H-ZSM-5, we achieved a two-fold increase in the initial reaction rate and a 10% increase in selectivity towards OME with 3 to 5 oxymethylene units (OME3â5), which are the more desirable products
Catalyst stabilization by stoichiometrically limited layer-by-layer overcoating in liquid media
The use of metal oxide overcoats over supported nanoparticle catalysts has recently led to impressive improvements in catalyst stability and selectivity. The deposition of alumina is especially important for renewable catalysis due to its robustness in liquid-phase conditions. However, there are limited reports of work on alumina deposition and stabilization that goes beyond atomic layer deposition (ALD). Here, we present a layer-by-layer deposition technique for the controlled formation of conformal alumina overcoats in the liquid phase. This technique is easy to perform in common wet chemistry conditions. Alternated exposure of the substrate to stoichiometric amounts of aluminum alkoxide and water in liquid-phase conditions leads to the formation of a porous overcoat that was easily tunable by varying synthesis parameters. The deposition of 60 Al2O3 layers onto Al2O3-supported copper nanoparticles suppressed irreversible deactivation during the liquid-phase hydrogenation of furfural â a key biomass-derived platform molecule. The porous overcoat leads to highly accessible metal sites, which significantly reduces the partial site blocking observed in equivalent overcoats formed by ALD. We suggest that the ease of scalability and the high degree of control over the overcoatâs properties during liquid-phase synthesis could facilitate the development of new catalyst overcoating applications
Selectivity control during the single-step conversion of aliphatic carboxylic acids to linear olefins
We have studied the single-step catalytic conversion of biomass-derived aliphatic carboxylic acids to linear olefins via tandem hydrogenation/dehydration reactions. Hexanoic acid was converted to a mixture of hexenes (92.0% selectivity) over silicaâalumina supported Cu nanoparticles. Remarkably, we observed a rapid selectivity switch to 99.8% hexane once carboxylic acids were fully consumed, with similar results using butanoic acid derived from biomass using consolidated bioprocessing. Based on intermediate, desorption, and in situ spectroscopy studies, we propose that the presence of a small amount of carboxylic acid on the catalyst surface leads to a dramatic decrease in overhydrogenation of olefins
Promotion Effect of Alkali Metal Hydroxides on Polymer-Stabilized Pd Nanoparticles for Selective Hydrogenation of CâC Triple Bonds in Alkynols
Postimpregnation of Pd nanoparticles (NPs) stabilized within hyper-cross-linked polystyrene with sodium or potassium hydroxides of optimal concentration was found to significantly increase the catalytic activity for the partial hydrogenation of the CâC triple bond in 2-methyl-3-butyn-2-ol at ambient hydrogen pressure. The alkali metal hydroxide accelerates the transformation of the residual Pd(II) salt into Pd(0) NPs and diminishes the reaction induction period. In addition, the selectivity to the desired 2-methyl-3-buten-2-ol increases with the K- and Na-doped catalysts from 97.0 up to 99.5%. This effect was assigned to interactions of the alkali metal ions with the Pd NPs surfaces resulting in the sitesâ separation and a change of reactants adsorption
Catalyst support and solvent effects during lignin depolymerization and hydrodeoxygenation
We studied and compared the hydrodeoxygenation (HDO) and depolymerization of aldehyde-stabilized lignin and 4-propylguaiacol (PG), a model lignin monomer. We demonstrated by liquid phase adsorption that PG HDO catalyzed by Ru/C can be achieved in isooctane but not in 1,4-dioxane due to competitive solvent binding to the active sites. Unfortunately, al-kanes cannot be used as solvents for real lignin due to limited solubility. However, we show that competitive solvent binding is suppressed when switching from activated carbon to oxophilic metal oxide supports such as TiO2, yielding 32%mol of an equimolar mixture of cyclohexanes and cyclohexanols from real lignin