Aumento de la fertilidad mediante técnicas de procesamiento avanzado de semen: caso clínico

Current equine reproductive clinic aims to improve subfertile stallions semen quality, (which is furthermore affected by the processing protocol) and maintain this quality during storage. The aim of this paper is to present a case referred to the Hospital Clínico Veterinario Complutense, of a stallion with low sperm quality, and 0% fertility rate in the first batch of mares served. Due to these results it was decided to perform a special semen processing protocol, developed by our laboratory, in order to increase its quality throughout a colloidal centrifugation technique with EquiPure® This system is able to increase semen quality and maintain itduring cooling preservation, obtaining results of around 57,1% of total fertility, which validates this technique as an effective method for subfertile stallions semen processing.La clínica reproductiva equina actual persigue mejorar la calidad seminal de sementales subfértiles, (la cual, además, se ve afectada por el procesamiento del semen) y que ésta se conserve durante el almacenamiento. El objetivo de este trabajo es presentar un caso clínico remitido al Hospital Clínico Veterinario Complutense, sobre un semental que presenta una baja calidad seminal, siendo la fertilidad del primer lote de yeguas del 0%. Ante estos resultados se decide realizar un procesado del semen, desarrollado por nuestro laboratorio, enfocado a aumentar su calidad mediante un protocolo de centrifugación coloidal con EquiPure® (Nidacon International AB). La aplicación de este protocolo consigue aumentar la calidad seminal y mantenerla durante la conservación en refrigeración, obteniéndose unos resultados de fertilidad total del 57,1%, lo que lo valida como método efectivo para el procesado del semen en casos de sementales subfértiles

Facile synthesis of low band gap ZnO Microstructures

Abstract In this work a simple chemical route was employed to synthesize ZnO microparticles by precipitation from aqueous solution of ZnCl2 as precursor, NaOH as oxidizing and sodium dodecyl sulfate (SDS) as surfactant. Samples of ZnO microparticles were analyzed by scanning electron microscopy (SEM), FTIR spectroscopy, Raman spectroscopy, X-Ray diffraction, UV/Vis-NIR diffusereflectance,highresolutiontransmissionelectronmicroscopy(HR-TEM),andN2 adsorption-desorption.Itwasobserved from SEM analysis that ZnO microparticles with morphologies resembling six-blade impeller with diameters in the range of 500 nm to 1 m, and sheet-like (approximately 200 nm×300 nm) were obtained through this technique. X-Ray diffraction and Raman analyses confirmed the obtaining of hexagonal wurtzite ZnO crystal structure. The calculated band gap energy was 3.19 eV, which is slightly lower than the average value reported in the literature. Specific BET area of ZnO microparticles was 26.5 m2/g. Keywords: ZnO, microstructures, band gap energy, SEM, morphology. Resumen En este trabajo se empleó un a ruta química sencilla para sintetizar micropartículas de ZnO mediante precipitación en solución acuosa de ZnCl2 como precursor, NaOH como oxidante y dodecil sulfato de sodio (SDS) como tensoactivo. Las muestras de ZnO fueron analizadas mediante microscopía de barrido electrónico (SEM), espectroscopía de FTIR, espectroscopía Raman, difracción de rayos-X, reflectancia difusa de UV/Vis-NIR, microscopía de transmisión de electrones de alta resolución (HRTEM), y mediante adsorción-desorción de N2. Se observó mediante análisis de SEM que mediante esta técnica se obtienen micropartículas de ZnO con morfologías similares a impulsores de seis-aspas con diámetros entre 500 nm y 1 m, morfologías tipo-hojas(deaproximadamente200nm×300nm).Losanálisisdedifracciónderayos-XydeRamanconfirmaronlaobtención de ZnO con estructura cristalina wurtzita hexagonal. La energía de band gap calculada fue de 3.19 eV, la cual es ligeramente menor que el valor promedio reportado en la literatura. El área superficial BET de las nanopartículas de ZnO fue de 26.5 m2/g Palabras clave: ZnO, microestructuras, energía de band gap, SEM, morfología

Search for a vector-like quark T′ → tH via the diphoton decay mode of the Higgs boson in proton-proton collisions at s \sqrt{s} = 13 TeV

A search for the electroweak production of a vector-like quark T′, decaying to a top quark and a Higgs boson is presented. The search is based on a sample of proton-proton collision events recorded at the LHC at = 13 TeV, corresponding to an integrated luminosity of 138 fb−1. This is the first T′ search that exploits the Higgs boson decay to a pair of photons. For narrow isospin singlet T′ states with masses up to 1.1 TeV, the excellent diphoton invariant mass resolution of 1–2% results in an increased sensitivity compared to previous searches based on the same production mechanism. The electroweak production of a T′ quark with mass up to 960 GeV is excluded at 95% confidence level, assuming a coupling strength κT = 0.25 and a relative decay width Γ/MT′ < 5%

Measurement of the Higgs boson inclusive and differential fiducial production cross sections in the diphoton decay channel with pp collisions at s \sqrt{s} = 13 TeV

The measurements of the inclusive and differential fiducial cross sections of the Higgs boson decaying to a pair of photons are presented. The analysis is performed using proton-proton collisions data recorded with the CMS detector at the LHC at a centre-of-mass energy of 13 TeV and corresponding to an integrated luminosity of 137 fb$^{−1}$. The inclusive fiducial cross section is measured to be $σ_{fid}$=73.4$^{+5.4}_{−5.3}$(stat)$^{+2.4}_{−2.2}$(syst) fb, in agreement with the standard model expectation of 75.4 ± 4.1 fb. The measurements are also performed in fiducial regions targeting different production modes and as function of several observables describing the diphoton system, the number of additional jets present in the event, and other kinematic observables. Two double differential measurements are performed. No significant deviations from the standard model expectations are observed

Search for new physics in multijet events with at least one photon and large missing transverse momentum in proton-proton collisions at 13 TeV

A search for new physics in final states consisting of at least one photon, multiple jets, and large missing transverse momentum is presented, using proton-proton collision events at a center-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 137 fb−1, recorded by the CMS experiment at the CERN LHC from 2016 to 2018. The events are divided into mutually exclusive bins characterized by the missing transverse momentum, the number of jets, the number of b-tagged jets, and jets consistent with the presence of hadronically decaying W, Z, or Higgs bosons. The observed data are found to be consistent with the prediction from standard model processes. The results are interpreted in the context of simplified models of pair production of supersymmetric particles via strong and electroweak interactions. Depending on the details of the signal models, gluinos and squarks of masses up to 2.35 and 1.43 TeV, respectively, and electroweakinos of masses up to 1.23 TeV are excluded at 95% confidence level

Search for Higgs Boson Decay to a Charm Quark-Antiquark Pair in Proton-Proton Collisions at √s = 13 TeV

A search for the standard model Higgs boson decaying to a charm quark-antiquark pair, H→c¯c, produced in association with a leptonically decaying V (W or Z) boson is presented. The search is performed with proton-proton collisions at √s=13  TeV collected by the CMS experiment, corresponding to an integrated luminosity of 138  fb−1. Novel charm jet identification and analysis methods using machine learning techniques are employed. The analysis is validated by searching for Z→c¯c in VZ events, leading to its first observation at a hadron collider with a significance of 5.7 standard deviations. The observed (expected) upper limit on σ(VH)B(H→c¯c) is 0.94 (0.50+0.22−0.15)pb at 95% confidence level (C.L.), corresponding to 14 (7.6+3.4−2.3) times the standard model prediction. For the Higgs-charm Yukawa coupling modifier, κc, the observed (expected) 95% C.L. interval is 1.1<|κc|<5.5 (|κc|<3.4), the most stringent constraint to date

Measurement of the cross section of top quark-antiquark pair production in association with a W boson in proton-proton collisions at s \sqrt{s} = 13 TeV

The production of a top quark-antiquark pair in association with a W boson $(t\bar{t}W)$ is measured in proton-proton collisions at a center-of-mass energy of 13 TeV. The analyzed data was recorded by the CMS experiment at the CERN LHC and corresponds to an integrated luminosity of 138 fb$^{−1}$. Events with two or three leptons (electrons and muons) and additional jets are selected. In events with two leptons, a multiclass neural network is used to distinguish between the signal and background processes. Events with three leptons are categorized based on the number of jets and of jets originating from b quark hadronization, and the lepton charges. The inclusive $(t\bar{t}W)$ production cross section in the full phase space is measured to be 868 ± 40(stat) ± 51(syst) fb. The $(t\bar{t}W)+$ and $(t\bar{t}W)−$ cross sections are also measured as 553 ± 30(stat) ± 30(syst) and 343 ± 26(stat) ± 25(syst) fb, respectively, and the corresponding ratio of the two cross sections is found to be 1.61±0.15(stat)$^{+0.07}_{−0.05}$(syst). The measured cross sections are larger than but consistent with the standard model predictions within two standard deviations, and represent the most precise measurement of these cross sections to date