Performance of bolted steel-beam to CFST-column joints using stiffened angles in column-removal scenario

This paper presents three experimental investigations on the performance of steel-beam to CFST-column joints using stiffened angle, long bolts and fin plate under a middle column removal scenario. Three specimens were designed and tested. The failure modes and catenary action are investigated in detail. The test results show that increasing the angle plate thickness at the joint could not only improve its performance significantly, but also trigger an early formation of catenary action. Increasing the length of short-limb had influence on the deformation ability of the proposed joint, rather than the load capacity. The buckling of stiffeners could prevent the brittle failure of the joints. With the contribution of catenary action, the joint shows much higher rotation capacities than that required in DoD design guidance. The initial stiffness of the joint was calculated using an analytical model with consideration of bolt pretension. Good agreement to the test results is achieved. A numerical analysis is also carried out, whose results show that adding additional row of bolts would improve the redundancy of the joint under column loss. An equivalent dynamic response evaluation of the joints was also performed. The results show that dynamic amplification coefficient should be worked out considering catenary action under large deformation

Quantitative test of a quantum theory for the resistive transition in a superconducting single-walled carbon nanotube bundle

The phenomenon of superconductivity depends on the coherence of the phase of the superconducting order parameter. The resistive transition in quasi-one-dimensional (quasi-1D) superconductors is broad because of a large phase fluctuation. We show that the resistive transition of a superconducting single-walled carbon nanotube bundle is in quantitative agreement with the Langer-Ambegaokar-McCumber-Halperin (LAMH) theory. We also demonstrate that the resistive transition below T^*_c = 0.89T_c0 is simply proportional to exp [-(3\beta T^*_c/T)(1-T/T^*_c)^3/2], where the barrier height has the same form as that predicted by the LAMH theory and T_c0 is the mean field superconducting transition temperature.Comment: 4 pages, 3 figure

Iterative Joint Channel Estimation and Symbol Detection for Multi-User MIMO OFDM

Multiple-Input-Multiple-Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) systems have recently attracted substantial research interest. However, compared to Single-Input-Single-Output (SISO) systems, channel estimation in the MIMO scenario becomes more challenging, owing to the increased number of independent transmitter-receiver links to be estimated. In the context of the Bell LAyered Space-Time architecture (BLAST) or Space Division Multiple Access (SDMA) multi-user MIMO OFDM literature, no channel estimation technique allows the number of users to be higher than the number of receiver antennas, which is often referred to as an “overloaded” scenario. In this contribution we propose a new Genetic Algorithm (GA) assisted iterative joint channel estimation and multiuser detection approach for MIMO SDMA-OFDM systems, which exhibits a robust performance in the above-mentioned overloaded scenario. Furthermore, GA-aided Multi-User Detection (MUD) techniques found in the literature can only provide a hard-decision output, while the proposed GA is capable of providing “soft” outputs, hence achieving an improved performance with the aid of channel decoders. Finally, a range of simulation results are provided to demonstrate the superiority of the proposed scheme

Constructions of free commutative integro-differential algebras

In this survey, we outline two recent constructions of free commutative integro-differential algebras. They are based on the construction of free commutative Rota-Baxter algebras by mixable shuffles. The first is by evaluations. The second is by the method of Gr\"obner-Shirshov bases.Comment: arXiv admin note: substantial text overlap with arXiv:1302.004

Stability of multi-electron bubbles in liquid helium

The stability of multi-electron bubbles in liquid helium is investigated theoretically. We find that multi-electron bubbles are unstable against fission whenever the pressure is positive. It is shown that for moving bubbles the Bernoulli effect can result in a range of pressures over which the bubbles are stable.Comment: 7 pages, 5 figure

Magnetic anisotropy and spin-spiral wave in V, Cr and Mn atomic chains on Cu(001) surface: First principles calculations

Recent ab intio studies of the magnetic properties of all 3d transition metal(TM) freestanding atomic chains predicted that these nanowires could have a giant magnetic anisotropy energy (MAE) and might support a spin-spiral structure, thereby suggesting that these nanowires would have technological applicationsin, e.g., high density magnetic data storages. In order to investigate how the substrates may affect the magnetic properties of the nanowires, here we systematically study the V, Cr and Mn linear atomic chains on the Cu(001) surface based on the density functional theory with the generalized gradient approximation. We find that V, Cr, and Mn linear chains on the Cu(001) surface still have a stable or metastable ferromagnetic state. However, the ferromagnetic state is unstable against formation of a noncollinear spin-spiral structure in the Mn linear chains and also the V linear chain on the atop sites on the Cu(001) surface, due to the frustrated magnetic interactions in these systems. Nonetheless, the presence of the Cu(001) substrate does destabilize the spin-spiral state already present in the freestanding V linear chain and stabilizes the ferromagnetic state in the V linear chain on the hollow sites on Cu(001). When spin-orbit coupling (SOC) is included, the spin magnetic moments remain almost unchanged, due to the weakness of SOC in 3d TM chains. Furthermore, both the orbital magnetic moments and MAEs for the V, Cr and Mn are small, in comparison with both the corresponding freestanding nanowires and also the Fe, Co and Ni linear chains on the Cu (001) surface.Comment: Accepted for publication in J. Phys. D: Applied Physic

Vector magnetic field sensing by single nitrogen vacancy center in diamond

In this Letter, we proposed and experimentally demonstrated a method to detect vector magnetic field with a single nitrogen vacancy (NV) center in diamond. The magnetic field in parallel with the axis of the NV center can be obtained by detecting the electron Zeeman shift, while the Larmor precession of an ancillary nuclear spin close to the NV center can be used to measure the field perpendicular to the axis. Experimentally, both the Zeeman shift and Larmor precession can be measured through the fluorescence from the NV center. By applying additional calibrated magnetic fields, complete information of the vector magnetic field can be achieved with such a method. This vector magnetic field detection method is insensitive to temperature fluctuation and it can be applied to nanoscale magnetic measurement.Comment: 5 pages, 5 figure