7,668 research outputs found
Replica grating study Interim report, 1 Jul. - 31 Dec. 1967
Thermal-vacuum stressing of replica diffraction grating
Replica grating study, phase 7 Interim report, 1 Jul. 1969 - 30 Jun. 1970
Particle irradiation tests on concave and Pyrex grating
Optical enhancement of photomultiplier sensitivity
Transmission and reflection light losses are reduced by introducing light into end-window of device at an angle large enough to normal so total internal reflection occurs at both photocathode-vacuum and window-air interfaces
Multiple pass reimaging optical system
An optical imaging system for enabling nonabsorbed light imaged onto a photodetective surface to be collected and reimaged one or more times onto that surface in register with the original image. The system includes an objective lens, one or more imaging lenses, one or more retroreflectors and perhaps a prism for providing optical matching of the imaging lens focal planes to the photo detective surface
Quasi-Normal Modes of Brane-Localised Standard Model Fields
We present here a detailed study of the quasi-normal spectrum of
brane-localised Standard Model fields in the vicinity of D-dimensional
black-holes. A variety of such backgrounds (Schwarzschild, Reissner-Nordstrom
and Schwarzszchild-(Anti) de Sitter) are investigated. The dependence of the
quasi-normal spectra on the dimensionality D, spin of the field s, and
multipole number l is analyzed. Analytical formulae are obtained for a number
of limiting cases: in the limit of large multipole number for Schwarzschild,
Schwarzschild-de Sitter and Reissner-Nordstrom black holes, in the extremal
limit of the Schwarzschild-de Sitter black hole, and in the limit of small
horizon radius in the case of Schwarzschild-Anti de Sitter black holes. We show
that an increase in the number of hidden, extra dimensions results in the
faster damping of all fields living on the brane, and that the localization of
fields on a brane affects the QN spectrum in a number of additional ways, both
direct and indirect.Comment: 13 pages, 4 figures, to be published in Phys. Rev.
The effect of support flexibility and damping on the dynamic response of a single mass flexible rotor in elastic bearings
The dynamic unabalance response and transient motion of the single mass Jeffcott rotor in elastic bearings mounted on damped, flexible supports are discussed. A steady state analysis of the shaft and the bearing housing motion was made by assuming synchronous precession of the system. The conditions under which the support system would act as a dynamic vibration absorber at the rotor critical speed were studied. Plots of the rotor and support amplitudes, phase angles, and forces transmitted were evaluated by the computer and the performance curves were plotted by an automatic plotter unit. Curves are presented on the optimization of the support housing characteristics of attenuate the rotor synchronous unbalance response
SPARCS: Stream-processing architecture applied in real-time cyber-physical security
In this paper, we showcase a complete, end-To-end, fault tolerant, bandwidth and latency optimized architecture for real time utilization of data from multiple sources that allows the collection, transport, storage, processing, and display of both raw data and analytics. This architecture can be applied for a wide variety of applications ranging from automation/control to monitoring and security. We propose a practical, hierarchical design that allows easy addition and reconfiguration of software and hardware components, while utilizing local processing of data at sensor or field site ('fog computing') level to reduce latency and upstream bandwidth requirements. The system supports multiple fail-safe mechanisms to guarantee the delivery of sensor data. We describe the application of this architecture to cyber-physical security (CPS) by supporting security monitoring of an electric distribution grid, through the collection and analysis of distribution-grid level phasor measurement unit (PMU) data, as well as Supervisory Control And Data Acquisition (SCADA) communication in the control area network
Design study of magnetic eddy-current vibration suppression dampers for application to cryogenic turbomachinery
Cryogenic turbomachinery used to pump high pressure fuel (liquid H2) and oxidizer (liquid O2) to the main engines of the Space Shuttle have experienced rotor instabilities. Subsynchronous whirl, an extremely destructive instability, has caused bearing failures and severe rubs in the seals. These failures have resulted in premature engine shutdowns or, in many instances, have limited the power level to which the turbopumps could be operated. The feasibility of using an eddy current type of damping mechanism for the Space Shuttle Main Engine is outlined
Engineering visualization utilizing advanced animation
Engineering visualization is the use of computer graphics to depict engineering analysis and simulation in visual form from project planning through documentation. Graphics displays let engineers see data represented dynamically which permits the quick evaluation of results. The current state of graphics hardware and software generally allows the creation of two types of 3D graphics. The use of animated video as an engineering visualization tool is presented. The engineering, animation, and videography aspects of animated video production are each discussed. Specific issues include the integration of staffing expertise, hardware, software, and the various production processes. A detailed explanation of the animation process reveals the capabilities of this unique engineering visualization method. Automation of animation and video production processes are covered and future directions are proposed
- …