Measurement of the adhesion between single melamine-formaldehyde resin microparticles and a flat fabric surface using AFM

An understanding of the adhesion of microparticles, particularly microcapsules, containing a functional component to a fabric surface is crucial to an effective application of this component to the fibre. Fabric surface is very rough; hence, direct measurement of the adhesion of single microparticles to surfaces with a roughness greater than the particle diameter is difficult. In the study reported here, cotton films were generated by dissolving cotton powder in an organic solvent and their properties including surface roughness, thickness, contact angle and purity were characterised. The adhesive forces between single melamineformaldehyde (MF) resin microparticles and a cotton film under ambient conditions with a relative humidity of above 40% were measured using atomic force microscopy; they are considered to be dominated by capillary forces. It was found that there was little adhesion between a MF microparticle and a cotton film in an aqueous solution of sodium dodecylbenzene sulphonate as surfactant. Repulsion between them was observed, but it reduced with increase in the surfactant concentration and decrease in the pH of the solution. The repulsion contributions are thought to originate mainly from electrostatic repulsion. It is believed that the studies on the adhesion between single MF microparticles and a cotton film under ambient conditions or dispersed in surfactant solutions, are beneficial to the attempts to enhance the adhesion of microcapsules to fabric surfaces via a modification of their surface composition and morphology

Fluorescent Discrimination between Traces of Chemical Warfare Agents and Their Mimics

An array of fluorogenic probes is able to discriminate between nerve agents, sarin, soman, tabun, VX and their mimics, in water or organic solvent, by qualitative fluorescence patterns and quantitative multivariate analysis, thus making the system suitable for the inthe- field detection of traces of chemical warfare agents as well as to differentiate between the real nerve agents and other related compounds.Ministerio de Economía y Competitividad, Spain (Project CTQ2012- 31611), Junta de Castilla y León, Consejería de Educación y Cultura y Fondo Social Europeo (Project BU246A12-1), the European Commission, Seventh Framework Programme (Project SNIFFER FP7-SEC-2012-312411) and the Swedish Ministry of Defence (no. A403913

Alternative methods of interpreting quality of life data in advanced gastrointestinal cancer patients

Understanding of how to analyse and interpret quality of life (QoL) data from clinical trials in patients with advanced cancer is limited. In order to increase the knowledge about the possibilities of drawing conclusions from QoL data of these patients, data from 2 trials were reanalysed. A total of 113 patients with pancreatic, biliary or gastric cancer were included in 2 randomised trials comparing chemotherapy and best supportive care (BSC) with BSC alone. Patient benefit was evaluated by the treating physician (subjective response) and by using selected scales and different summary measures of the EORTC QLQ-C30 questionnaire. An increasing number of drop-outs (mainly due to death) with time did not occur in a random fashion. Therefore, the mean scores in the different subscales of the QLQ-C30 obtained during the follow-up of interviewed patients did not reflect the outcome of the randomised population. The scores of the patient-provided summary measure, ‘Global health status/QoL’, were stable in a rather high proportion of the patients and could not discriminate between the 2 groups. 3 other summary measures revealed greater variability, and they all discriminated between the 2 groups. A high agreement was also seen between the changes in the summary measures and the subjective response. A categorisation of whether an individual patient had benefited or not from the intervention could overcome the problem with the selective attrition. © 2001 Cancer Research Campaig

Adhesion of perfume-filled microcapsules to model fabric surfaces

The retention and adhesion of melamine formaldehyde (MF) microcapsules on a model fabric surface in aqueous solution were investigated using a customised flow chamber technique and atomic force microscopy (AFM). A cellulose film was employed as a model fabric surface. Modification of the cellulose with chitosan was found to increase the retention and adhesion of microcapsules on the model fabric surface. The AFM force–displacement data reveal that bridging forces resulting from the extension of cellulose chains dominate the adhesion between the microcapsule and the unmodified cellulose film, whereas electrostatic attraction helps the microcapsules adhere to the chitosan-modified cellulose film. The correlation between results obtained using these two complementary techniques suggests that the flow chamber device can be potentially used for rapid screening of the effect of chemical modification on the adhesion of microparticles to surfaces, reducing the time required to achieve an optimal formulation

On crack path stability in a layered material

Crack paths in an elastic layer on top of a substrate are considered. Crack growth is initiated from an edge crack in the layer. The plane of the initially straight crack forms an angle to the free surface. The load consists of a pair of forces applied at the crack mouth and parallel to the interface. Crack paths are calculated using a boundary element method. Crack growth is assumed to proceed along a path for which the mode II stress intensity factor vanishes. The inclination and the length of the initial crack are varied. The effect of two different substrates on the crack path evolution is demonstrated. A crack path initially leading perpendicularly to the interface is shown to be directionally unstable for a rigid substrate. Irrespective of its initial angle, the crack does not reach the interface, but reaches the free surface if the layer is infinitely long. At finite layer length the crack reaches the upper free surface if the initial crack inclination to the surface is small enough. For an inextendable flexible substrate, on the other hand, the crack reaches the interface if its initial inclination is large enough. For the flexible substrate an unstable path parallel with the sides of an infinitely long layer is identified. The results are compared with experimental results and discussed in view of characterisation of directionally unstable crack paths. The energy release rate for an inclined edge crack is determined analytically