Saturn integrated circuit reliability test program Quarterly progress report, Jul. - Sep. 1966

Saturn integrated circuit reliability tests performed to improve failure mode screenin

UV radiation enhanced oxygen vacancy formation caused by the PLD plasma plume

Pulsed Laser Deposition is a commonly used non-equilibrium physical deposition technique for the growth of complex oxide thin films. A wide range of parameters is known to influence the properties of the used samples and thin films, especially the oxygen-vacancy concentration. One parameter has up to this point been neglected due to the challenges of separating its influence from the influence of the impinging species during growth: the UV-radiation of the plasma plume. We here present experiments enabled by a specially designed holder to allow a separation of these two influences. The influence of the UV-irradiation during pulsed laser deposition on the formation of oxygen-vacancies is investigated for the perovskite model material SrTiO3. The carrier concentration of UV-irradiated samples is nearly constant with depth and time. By contrast samples not exposed to the radiation of the plume show a depth dependence and a decrease in concentration over time. We reveal an increase in Ti-vacancy–oxygen-vacancy-complexes for UV irradiated samples, consistent with the different carrier concentrations. We find a UV enhanced oxygen-vacancy incorporation rate as responsible mechanism. We provide a complete picture of another influence parameter to be considered during pulsed laser depositions and unravel the mechanism behind persistent-photo-conductivity in SrTiO3

Электроснабжение установки перекачки нефти п. Пионерный ОАО «Томскнефть»

РЕФЕРАТ Выпускная квалификационная работа 149 с., 23 рис., 32 табл., 29 источников, 6 прил. Ключевые слова: нефтепровод, насос, электрооборудование, схема электроснабжения, линия, сеть, электроприемник, нагрузка, оборудование, защита, ток, напряжение, мощность. Объектом исследования является электрическая часть УПН п. Пионерный ОАО «Томскенефть». Цель работы – проектирование схемы электроснабжения предприятия, выбор оборудования. В процессе исследования проводился сбор исходных данных в ходе производственной практики на объекте исследования. В результате была спроектирована схема электроснабжения от подстанции энергосистемы, до конечного электроприемника. Были выбраны кабели и провода, коммутационное оборудование, были сделаны необходимые проверки. Также результатом работы сталESSAY Final qualifying work 149 p., 23 fig., 32 tab., 29 sources, 6 adj. Keywords: oil, pump, electrical equipment, power supply circuit, line, network, power-consuming equipment, load equipment, protection, current, voltage, power. The object of research is the electrical part of UPN claim. Pionerny of "Tomskeneft". The purpose of work - designing enterprise power scheme, the choice of equipment. The study was conducted to collect baseline data in the course of practical training on the subject of the study. As a result, power supply circuit has been designed from the substation grid, appliance, to the end. Were selected cables and wires, switching equipment, the necessary checks have been made. It is also the result of the work became an economic calculation of capital costs for the con

Hydrophobically Modified Sulfobetaine Copolymers with Tunable Aqueous UCST through Postpolymerization Modification of Poly(pentafluorophenyl acrylate)

Polysulfobetaines, polymers carrying highly polar zwitterionic side chains, present a promising research field by virtue of their antifouling properties, hemocompatibility, and stimulus-responsive behavior. However, limited synthetic approaches exist to produce sulfobetaine copolymers comprising hydrophobic components. Postpolymerization modification of an activated ester precursor, poly(pentafluorophenyl acrylate), employing a zwitterionic amine, 3-((3-aminopropyl)dimethylammonio)propane-1-sulfonate, ADPS, is presented as a novel, one-step synthetic concept toward sulfobetaine (co)polymers. Modifications were performed in homogeneous solution using propylene carbonate as solvent with mixtures of ADPS and pentylamine, benzylamine, and dodecylamine producing a series of well-defined statistical acrylamido sulfobetaine copolymers containing hydrophobic pentyl, benzyl, or dodecylacrylamide comonomers with well-controllable molar composition as evidenced by NMR and FT-IR spectroscopy and size exclusion chromatography.This synthetic strategy was exploited to investigate, for the first time, the influence of hydrophobic modification on the upper critical solution temperature (UCST) of sulfobetaine copolymers in aqueous solution. Surprisingly, incorporation of pentyl groups was found to increase solubility over a wide composition range, whereas benzyl groups decreased solubility—an effect attributed to different entropic and enthalpic contributions of both functional groups. While UCST transitions of polysulfobetaines are typically limited to higher molar mass samples, incorporation of 0–65 mol % of benzyl groups into copolymers with molar masses of 25.5–34.5 kg/mol enabled sharp, reversible transitions from 6 to 82 °C in solutions containing up to 76 mM NaCl, as observed by optical transmittance and dynamic light scattering. Both synthesis and systematic UCST increase of sulfobetaine copolymers presented here are expected to expand the scope and applicability of these smart materials

Monte Carlo Simulations indicate that Chromati: Nanostructure is accessible by Light Microscopy

A long controversy exists about the structure of chromatin. Theoretically, this structure could be resolved by scattering experiments if one determines the scattering function - or equivalently the pair distribution function - of the nucleosomes. Unfortunately, scattering experiments with live cells are very difficult and limited to only a couple of nucleosomes