9,985 research outputs found
Xenon ion propulsion for orbit transfer
For more than 30 years, NASA has conducted an ion propulsion program which has resulted in several experimental space flight demonstrations and the development of many supporting technologies. Technologies appropriate for geosynchronous stationkeeping, earth-orbit transfer missions, and interplanetary missions are defined and evaluated. The status of critical ion propulsion system elements is reviewed. Electron bombardment ion thrusters for primary propulsion have evolved to operate on xenon in the 5 to 10 kW power range. Thruster efficiencies of 0.7 and specific impulse values of 4000 s were documented. The baseline thruster currently under development by NASA LeRC includes ring-cusp magnetic field plasma containment and dished two-grid ion optics. Based on past experience and demonstrated simplifications, power processors for these thrusters should have approximately 500 parts, a mass of 40 kg, and an efficiency near 0.94. Thrust vector control, via individual thruster gimbals, is a mature technology. High pressure, gaseous xenon propellant storage and control schemes, using flight qualified hardware, result in propellant tankage fractions between 0.1 and 0.2. In-space and ground integration testing has demonstrated that ion propulsion systems can be successfully integrated with their host spacecraft. Ion propulsion system technologies are mature and can significantly enhance and/or enable a variety of missions in the nation's space propulsion program
Trailing Edge Noise Reduction by Passive and Active Flow Controls
This paper presents the results on the use of porous metal foams (passive control) and dielectric barrier surface plasma actuations (active control) for the reduction of vortex shedding tonal noises from the nonflat plate type trailing edge serration in a NACA0012 airfoil previously discussed in Chong et al. (AIAA J. Vol. 51, 2013, pp. 2665-2677). The use of porous metal foams to fill the interstices between adjacent members of the sawtooth can almost completely suppress the vortex shedding tonal noise, whilst the serration effect on the broadband noise reduction is retained. This concept will promote the nonflat plate type serrated trailing edge to become a genuine alternative to the conventional flat plate type serrated trailing edge, which is known to have drawbacks in the structural stability, aerodynamic performances and implementation issues. For the plasma actuators, configuration which produces electric wind in a tangential direction is found to be not very effective in suppressing the vortices emanated from the serration blunt root. On the other hand, for the plasma configuration which produces electric wind in a vertical direction, good level of vortex shedding tonal noise reduction has been demonstrated. However, the self noise produced by the plasma actuators negates the noise benefits on the tonal noise reduction. This characteristic illustrates the need to further develop the plasma actuators in a two pronged approach. First is to increase the electric wind speed, thereby allowing the plasma actuators to be used in a higher free jet velocity which naturally produces a larger level of jet noise. Second, the self noise radiated by the plasma actuators should be reduced
Unique Minimal Liftings for Simplicial Polytopes
For a minimal inequality derived from a maximal lattice-free simplicial
polytope in , we investigate the region where minimal liftings are
uniquely defined, and we characterize when this region covers . We then
use this characterization to show that a minimal inequality derived from a
maximal lattice-free simplex in with exactly one lattice point in the
relative interior of each facet has a unique minimal lifting if and only if all
the vertices of the simplex are lattice points.Comment: 15 page
Strain bursts in plastically deforming Molybdenum micro- and nanopillars
Plastic deformation of micron and sub-micron scale specimens is characterized
by intermittent sequences of large strain bursts (dislocation avalanches) which
are separated by regions of near-elastic loading. In the present investigation
we perform a statistical characterization of strain bursts observed in
stress-controlled compressive deformation of monocrystalline Molybdenum
micropillars. We characterize the bursts in terms of the associated elongation
increments and peak deformation rates, and demonstrate that these quantities
follow power-law distributions that do not depend on specimen orientation or
stress rate. We also investigate the statistics of stress increments in between
the bursts, which are found to be Weibull distributed and exhibit a
characteristic size effect. We discuss our findings in view of observations of
deformation bursts in other materials, such as face-centered cubic and
hexagonal metals.Comment: 14 pages, 8 figures, submitted to Phil Ma
On the Second Law of thermodynamics and the piston problem
The piston problem is investigated in the case where the length of the
cylinder is infinite (on both sides) and the ratio is a very small
parameter, where is the mass of one particle of the gaz and is the mass
of the piston. Introducing initial conditions such that the stochastic motion
of the piston remains in the average at the origin (no drift), it is shown that
the time evolution of the fluids, analytically derived from Liouville equation,
agrees with the Second Law of thermodynamics.
We thus have a non equilibrium microscopical model whose evolution can be
explicitly shown to obey the two laws of thermodynamics.Comment: 29 pages, 9 figures submitted to Journal of Statistical Physics
(2003
Design of a low-noise aeroacoustic wind tunnel facility at Brunel University
This paper represents the design principle of a quiet, low turbulence and moderately high speed aeroacoustic wind tunnel which was recently commissioned at Brunel University. A new hemi-anechoic chamber was purposely built to facilitate aeroacoustic measurements. The wind tunnel can achieve a maximum speed of about 80 ms-1. The turbulence intensity of the free jet in the potential core is between 0.1–0.2%. The noise characteristic of the aeroacoustic wind tunnel was validated by three case studies. All of which can demonstrate a very low background noise produced by the bare jet in comparison to the noise radiated from the cylinder rod/flat plate/airfoil in the air stream.The constructions of the aeroacoustic wind tunnel and the hemi-anechoic chamber are financially supported by the School of Engineering and Design at Brunel University
A complete devil's staircase in the Falicov-Kimball model
We consider the neutral, one-dimensional Falicov-Kimball model at zero
temperature in the limit of a large electron--ion attractive potential, U. By
calculating the general n-ion interaction terms to leading order in 1/U we
argue that the ground-state of the model exhibits the behavior of a complete
devil's staircase.Comment: 6 pages, RevTeX, 3 Postscript figure
Perspective: tobacco manufacturers are now compensating states for smoking-related costs: how will this affect the economy?
Smoking out the social and economic benefits of the 1998 tobacco settlement for Massachusetts.Tobacco industry ; Medical care, Cost of
- …