16,062 research outputs found
Apparatus for conducting flow electrophoresis in the substantial absence of gravity
A zero-g, constant flow electrophoretic separating apparatus is presented. The apparatus is composed a deflecting member to spread carrier fluid across a conduit, and an end wall with a valve located in the conduit past the separation electrodes from which layers of carrier and sample may be extracted. Electrode electrolyte is separated from the carrier and continually circulated and cleaned
Space processing: A projection
Estimates concerning space manufacturing, which might well become the largest and most specific application of space technology by the end of the century are given. Two classes of materials are considered - electronic crystals and biologicals
Experimental evaluation of outer case blowing or bleeding of single stage axial flow compressor. Part I - Design of rotor and bleeding and blowing configurations
Rotor design to evaluate outer case blowing or bleeding of single stage axial flow compresso
Outcome assessment after hip fracture : is EQ-5D the answer?
Objectives: To study the measurement properties of a joint specific patient reported outcome measure, a measure of capability and a general health-related quality of life (HRQOL) tool in a large cohort of patients with a hip fracture.
Methods: Responsiveness and associations between the Oxford Hip Score (a hip specific measure: OHS), ICEpop CAPability (a measure of capability in older people: ICECAP-O) and EuroQol EQ-5D (general health-related quality of life measure: EQ-5D) were assessed using data available from two large prospective studies. The three outcome measures were assessed concurrently at a number of fixed follow-up time-points in a consecutive sequence of patients, allowing direct assessment of change from baseline, inter-measure associations and validity using a range of statistical methods.
Results: ICECAP-O was not responsive to change. EQ-5D was responsive to change from baseline, with an estimated standardised effect size for the two datasets of 0.676 and 0.644 at six weeks and four weeks respectively; this was almost as responsive to change as OHS (1.14 at four weeks). EQ-5D correlated strongly with OHS; Pearson correlation coefficients were 0.74, 0.77 and 0.70 at baseline, four weeks and four months. EQ-5D is a moderately good predictor of death at 12 months following hip fracture. Furthermore, EQ-5D reported by proxies (relatives and carers) behaves similarly to self-reported scores.
Conclusions: Our findings suggest that a general HRQOL tool such as EQ-5D could be used to measure outcome for patients recovering from hip fracture, including those with cognitive impairment
Warwick hip trauma study : a randomised clinical trial comparing interventions to improve outcomes in internally fixed intracapsular fractures of the proximal femur : protocol for The WHiT Study
Background
Controversy exists regarding the optimal treatment for patients with displaced intracapsular fractures of the proximal femur. The recognised treatment alternatives are arthroplasty and internal fixation. The principal criticism of internal fixation is the high rate of non-union; up to 30% of patients will have a failure of the fixation leading to revision surgery. We believe that improved fracture healing may lead to a decreased rate of failure of fixation. We therefore propose to investigate strategies to both accelerate fracture healing and improve fixation that may significantly improve outcomes after internal fixation of intracapsular femoral fractures. We aim to test the clinical effectiveness of the osteoinductive agent platelet rich plasma and conduct a pilot study of a novel fixed-angle fixation system.
Design
We have planned a three arm, single centre, standard-of-care controlled, double blinded, pragmatic, randomised clinical trial. The trial will include a standard two-way comparison between platelet-rich plasma and standard-of-care fixation versus standard-of-care fixation alone. In addition there will be a subsidiary pilot arm testing a fixed-angle screw and plate fixation system
Long-term material compatibility testing system
System includes procedure for hermetically sealing solid materials and fluids in glass ampoule and use of temperature-controlled facility containing sample holder, which permits sample containers to be retrieved safely and conveniently. Solid material and fluid are sealed within chemically-clean glass ampoule according to highly detailed procedure
Exciton Mott transition in Si Revealed by Terahertz Spectroscopy
Exciton Mott transition in Si is investigated by using terahertz time-domain
spectroscopy. The excitonic correlation as manifested by the 1s-2p resonance is
observed above the Mott density. The scattering rate of charge carriers is
prominently enhanced at the proximity of Mott density, which is attributed to
the non-vanishing exciton correlation in the metallic electron-hole plasma.
Concomitantly, the signature of plasmon-exciton coupling is observed in the
loss function spectra.Comment: 5 pages, 3 figure
A randomised controlled trial of total hip arthroplasty versus resurfacing arthroplasty in the treatment of young patients with arthritis of the hip joint
Background: Hip replacement (arthroplasty) surgery is a highly successful treatment for patients with severe symptomatic arthritis of the hip joint. For older patients, several designs of Total Hip Arthroplasty have shown excellent results in terms of both function and value for money. However, in younger more active patients, there is approximately a 50% failure rate at 25 years for traditional implants. Hip resurfacing is a relatively new arthroplasty technique. In a recent review of the literature on resurfacing arthroplasty it was concluded that the short-term functional results appear promising but some potential early disadvantages were identified, including the risk of femoral neck fracture and collapse of the head of the femur. The aim of the current study is to assess whether there is a difference in functional hip scores at one year post-operation between Total Hip Arthroplasty and Resurfacing Arthroplasty. Secondary aims include assessment of complication rates for both procedures as well cost effectiveness.
Methods/design: All patients medically fit for surgery and deemed suitable for a resurfacing arthroplasty are eligible to take part in this study. A randomisation sequence will be produced and administered independently. After consenting, all patients will be clinically reviewed and hip function, quality of life and physical activity level will be assessed through questionnaires. The allocated surgery will then be performed with the preferred technique of the surgeon. Six weeks post-operation hip function will be assessed and complications recorded. Three, six and 12 months post-operation hip function, quality of life and physical activity level will be assessed. Additional information about patients' out-of-pocket expenses will also be collected
Advanced composite aileron for L-1011 transport aircraft, task 1
Structural design and maintainability criteria were established and used as a guideline for evaluating a variety of configurations and materials for each of the major subcomponents. From this array of subcomponent designs, several aileron assemblies were formulated and analyzed. The selected design is a multirib configuration with sheet skin covers mechanically fastened to channel section ribs and spars. Qualitative analysis of currently available composite material systems led to the selection of three candidate materials on which comparative structural tests were conducted to measure the effects of environment and impact damage on mechanical property retention. In addition, each system was evaluated for producibility characteristics. From these tests, Thornel 300/5208 unidirectional tape was selected for the front spar and covers, and Thornel 300 fabric/5208 was chosen for the ribs
Quantum stochastic description of collisions in a canonical Bose gas
We derive a stochastic process that describes the kinetics of a
one-dimensional Bose gas in a regime where three body collisions are important.
In this situation the system becomes non integrable offering the possibility to
investigate dissipative phenomena more simply compared to higher dimensional
gases. Unlike the quantum Boltzmann equation describing the average momentum
distribution, the stochastic approach allows a description of higher-order
correlation functions in a canonical ensemble. As will be shown, this ensemble
differs drastically from the grand canonical one. We illustrate the use of this
method by determining the time evolution of the momentum mode particle number
distribution and the static structure factor during the evaporative cooling
process.Comment: 4 pages, 4 figure
- …