Soot Volume Fraction Maps for Normal and Reduced Gravity Laminar Acetylene Jet Diffusion Flames

The study of soot particulate distribution inside gas jet diffusion flames is important to the understanding of fundamental soot particle and thermal radiative transport processes, as well as providing findings relevant to spacecraft fire safety, soot emissions, and radiant heat loads for combustors used in air-breathing propulsion systems. Compared to those under normal gravity (1-g) conditions, the elimination of buoyancy-induced flows is expected to significantly change the flow field in microgravity (O g) flames, resulting in taller and wider flames with longer particle residence times. Work by Bahadori and Edelman demonstrate many previously unreported qualitative and semi-quantitative results, including flame shape and radiation, for sooting laminar zas jet diffusion flames. Work by Ku et al. report soot aggregate size and morphology analyses and data and model predictions of soot volume fraction maps for various gas jet diffusion flames. In this study, we present the first 1-g and 0-g comparisons of soot volume fraction maps for laminar acetylene and nitrogen-diluted acetylene jet diffusion flames. Volume fraction is one of the most useful properties in the study of sooting diffusion flames. The amount of radiation heat transfer depends directly on the volume fraction and this parameter can be measured from line-of-sight extinction measurements. Although most Soot aggregates are submicron in size, the primary particles (20 to 50 nm in diameter) are in the Rayleigh limit, so the extinction absorption) cross section of aggregates can be accurately approximated by the Rayleigh solution as a function of incident wavelength, particles' complex refractive index, and particles' volume fraction

Soot Volume Fraction Imaging

A new technique is described for the full-field determination of soot volume fractions via laser extinction measurements. This technique differs from previously reported point-wise methods in that a two-dimensional array (i.e., image) of data is acquired simultaneously. In this fashion, the net data rate is increased, allowing the study of time-dependent phenomena and the investigation of spatial and temporal correlations. A telecentric imaging configuration is employed to provide depth-invariant magnification and to permit the specification of the collection angle for scattered light. To improve the threshold measurement sensitivity, a method is employed to suppress undesirable coherent imaging effects. A discussion of the tomographic inversion process is provided, including the results obtained from numerical simulation. Results obtained with this method from an ethylene diffusion flame are shown to be in close agreement with those previously obtained by sequential point-wise interrogation

Soot formation and radiation in turbulent jet diffusion flames under normal and reduced gravity conditions

Most practical combustion processes, as well as fires and explosions, exhibit some characteristics of turbulent diffusion flames. For hydrocarbon fuels, the presence of soot particles significantly increases the level of radiative heat transfer from flames. In some cases, flame radiation can reach up to 75 percent of the heat release by combustion. Laminar diffusion flame results show that radiation becomes stronger under reduced gravity conditions. Therefore, detailed soot formation and radiation must be included in the flame structure analysis. A study of sooting turbulent diffusion flames under reduced-gravity conditions will not only provide necessary information for such practical issues as spacecraft fire safety, but also develop better understanding of fundamentals for diffusion combustion. In this paper, a summary of the work to date and of future plans is reported

Molecular determinants of drug-specific sensitivity for epidermal growth factor receptor (EGFR) exon 19 and 20 mutants in non-small cell lung cancer.

We hypothesized that aberrations activating epidermal growth factor receptor (EGFR) via dimerization would be more sensitive to anti-dimerization agents (e.g., cetuximab). EGFR exon 19 abnormalities (L747_A750del; deletes amino acids LREA) respond to reversible EGFR kinase inhibitors (TKIs). Exon 20 in-frame insertions and/or duplications (codons 767 to 774) and T790M mutations are clinically resistant to reversible/some irreversible TKIs. Their impact on protein function/therapeutic actionability are not fully elucidated.In our study, the index patient with non-small cell lung cancer (NSCLC) harbored EGFR D770_P772del_insKG (exon 20). A twenty patient trial (NSCLC cohort) (cetuximab-based regimen) included two participants with EGFR TKI-resistant mutations ((i) exon 20 D770>GY; and (ii) exon 19 LREA plus exon 20 T790M mutations). Structural modeling predicted that EGFR exon 20 anomalies (D770_P772del_insKG and D770>GY), but not T790M mutations, stabilize the active dimer configuration by increasing the interaction between the kinase domains, hence sensitizing to an agent preventing dimerization. Consistent with predictions, the two patients harboring D770_P772del_insKG and D770>GY, respectively, responded to an EGFR antibody (cetuximab)-based regimen; the T790M-bearing patient showed no response to cetuximab combined with erlotinib. In silico modeling merits investigation of its ability to optimize therapeutic selection based on structural/functional implications of different aberrations within the same gene

Detailed modeling analysis for soot formation and radiation in microgravity gas jet diffusion flames

Radiation heat transfer in combustion systems has been receiving increasing interest. In the case of hydrocarbon fuels, a significant portion of the radiation comes from soot particles, justifying the need for detailed soot formation model and radiation transfer calculations. For laminar gas jet diffusion flames, results from this project (4/1/91 8/22/95) and another NASA study show that flame shape, soot concentration, and radiation heat fluxes are substantially different under microgravity conditions. Our emphasis is on including detailed soot transport models and a detailed solution for radiation heat transfer, and on coupling them with the flame structure calculations. In this paper, we will discuss the following three specific areas: (1) Comparing two existing soot formation models, and identifying possible improvements; (2) A simple yet reasonably accurate approach to calculating total radiative properties and/or fluxes over the spectral range; and (3) Investigating the convergence of iterations between the flame structure solver and the radiation heat transfer solver

Measurements and Modeling of Soot Formation and Radiation in Microgravity Jet Diffusion Flames

This is a computational and experimental study for soot formation and radiative heat transfer in jet diffusion flames under normal gravity (1-g) and microgravity (0-g) conditions. Instantaneous soot volume fraction maps are measured using a full-field imaging absorption technique developed by the authors. A compact, self-contained drop rig is used for microgravity experiments in the 2.2-second drop tower facility at NASA Lewis Research Center. On modeling, we have coupled flame structure and soot formation models with detailed radiation transfer calculations. Favre-averaged boundary layer equations with a k-e-g turbulence model are used to predict the flow field, and a conserved scalar approach with an assumed Beta-pdf are used to predict gaseous species mole fraction. Scalar transport equations are used to describe soot volume fraction and number density distributions, with formation and oxidation terms modeled by one-step rate equations and thermophoretic effects included. An energy equation is included to couple flame structure and radiation analyses through iterations, neglecting turbulence-radiation interactions. The YIX solution for a finite cylindrical enclosure is used for radiative heat transfer calculations. The spectral absorption coefficient for soot aggregates is calculated from the Rayleigh solution using complex refractive index data from a Drude- Lorentz model. The exponential-wide-band model is used to calculate the spectral absorption coefficient for H20 and C02. It is shown that when compared to results from true spectral integration, the Rosseland mean absorption coefficient can provide reasonably accurate predictions for the type of flames studied. The soot formation model proposed by Moss, Syed, and Stewart seems to produce better fits to experimental data and more physically sound than the simpler model by Khan et al. Predicted soot volume fraction and temperature results agree well with published data for a normal gravity co-flow laminar flames and turbulent jet flames. Predicted soot volume fraction results also agree with our data for 1-g and 0-g laminar jet names as well as 1-g turbulent jet flames

Using Social Marketing to Engage Extension Audiences: Lessons from an Effort Targeting Woodland Owners

Social marketing involves applying traditional commercial marketing techniques to public good outcomes. We share findings from use of this approach in reaching woodland owners to promote sustainable forestry in southwest Wisconsin. We experimentally tested three direct mail campaigns. Each included two offers—a free handbook and a free forester visit, but the campaigns varied in terms of landowner segments and marketing messages. Key results across the campaigns include consistent performance of the offers (handbook 17%–19%, forester visit 3%–5%) but varied effects of segment and message. Our results suggest that social marketing can pay dividends in reaching landowners and, potentially, other Extension clientele, but there is more to learn

Decoupling the Relation Between Risk Factors for Conduct Problems and the Receipt of Intervention Services: Participation Across Multiple Components of a Prevention Program

This study examined whether the link between risk factors for conduct problems and low rates of participation in mental health treatment could be decoupled through the provision of integrated prevention services in multiple easily-accessible contexts. It included 445 families of first-grade children (55% minority), living in four diverse communities, and selected for early signs of conduct problems. Results indicated that, under the right circumstances, these children and families could be enticed to participate at high rates in school-based services, therapeutic groups, and home visits. Because different sets of risk factors were related to different profiles of participation across the components of the prevention program, findings highlight the need to offer services in multiple contexts to reach all children and families who might benefit from them

'It's Reducing a Human Being to a Percentage'; Perceptions of Justice in Algorithmic Decisions

Data-driven decision-making consequential to individuals raises important questions of accountability and justice. Indeed, European law provides individuals limited rights to 'meaningful information about the logic' behind significant, autonomous decisions such as loan approvals, insurance quotes, and CV filtering. We undertake three experimental studies examining people's perceptions of justice in algorithmic decision-making under different scenarios and explanation styles. Dimensions of justice previously observed in response to human decision-making appear similarly engaged in response to algorithmic decisions. Qualitative analysis identified several concerns and heuristics involved in justice perceptions including arbitrariness, generalisation, and (in)dignity. Quantitative analysis indicates that explanation styles primarily matter to justice perceptions only when subjects are exposed to multiple different styles---under repeated exposure of one style, scenario effects obscure any explanation effects. Our results suggests there may be no 'best' approach to explaining algorithmic decisions, and that reflection on their automated nature both implicates and mitigates justice dimensions.Comment: 14 pages, 3 figures, ACM Conference on Human Factors in Computing Systems (CHI'18), April 21--26, Montreal, Canad