Structural Antennas for 3cm Radar Onboard Multi-Rotor UAV

A series of 3cm amateur band radar antennas suitable for installation on a cinematic grade multi-rotor UAV were considered. A wideband open waveguide mouth antenna was developed that can be made from the existing arms of a multi-rotor UAV without any increase in weight for side-looking wall detection ranging radar. For downward looking radio altimeter, cutting slots in the arms to form slotted waveguide antennas was shown in simulation to be possible both in terms of covering the entire 3cm band from 10 to 10.5GHz and without overly weakening the arms as structural members

Three-axis adjustable loading structure

A three axis adjustable loading structure for testing the movable surfaces of aircraft by applying pressure, is described. The device has three electric drives where the wall angle, horizontal position, and vertical position of the test device can be rapidly and accurately positioned

Outsourcing the Human Resource Function: Environmental and Organizational Characteristics that Affect HR Performance

A theoretical model is presented that identifies environmental and organizational characteristics that affect human resource (HR) performance in an organization. Specifically, we address the issue of when and under what circumstances does HR outsourcing contribute value to the firm by attempting to identify environmental and organizational characteristics that affect HR department performance and how HR outsourcing mediates that relationship. We propose that supplier competition in the HR provider market has a direct effect on the amount of HR outsourcing which in turn has a direct effect on HR performance. Environmental uncertainty (primary, competitive, and supplier) is proposed to moderate the relationship between amount of HR outsourcing and HR performance while asset specificity is proposed to moderate the relationship between supplier competition and amount of HR outsourcing. An earlier version of this paper was presented at the Southwest Academy of Management meeting in Houston, Texas, March, 2003, and received the 2003 Irwin/McGraw-Hill Distinguished Paper Awar

Porting Spotlight Range Migration Algorithm Processor from Matlab to Virtex 6

This paper describes the implementation and optimization of a Synthetic Aperture Radar process Spotlight Range Migration Algorithm processor on FPGA Virtex 6 DSP kit that fits on the chip. The mean/max error compared to a software implementation is -54/-28.74dB for 55 elements and 882 samples

FMCW rail-mounted SAR: Porting spotlight SAR imaging from MATLAB to FPGA

In this work, a low-cost laptop-based radar platform derived from the MIT open courseware has been implemented. It can perform ranging, Doppler measurement and SAR imaging using MATLAB as the processor. In this work, porting the signal processing algorithms onto a FPGA platform will be addressed as well as differences between results obtained using MATLAB and those obtained using the FPGA platform. The target FPGA platforms were a Virtex6 DSP kit and Spartan3A starter kit, the latter was also low-cost to further reduce the cost for students to access radar technology

Maser Flare Simulations from Oblate and Prolate Clouds

We investigated, through numerical models, the flaring variability that may arise from the rotation of maser clouds of approximately spheroidal geometry, ranging from strongly oblate to strongly prolate examples. Inversion solutions were obtained for each of these examples over a range of saturation levels from unsaturated to highly saturated. Formal solutions were computed for rotating clouds with many randomly chosen rotation axes, and corresponding averaged maser light curves plotted with statistical information. The dependence of results on the level of saturation and on the degree of deformation from the spherical case were investigated in terms of a variability index and duty cycle. It may be possible to distinguish observationally between flares from oblate and prolate objects. Maser flares from rotation are limited to long timescales (at least a few years) and modest values of the variability index ($\lesssim 100$), and can be aperiodic or quasi-periodic. Rotation is therefore not a good model for H$_2$O variability on timescales of weeks to months, or of truly periodic flares.Comment: 11 pages, 12 figures, accepted for publication in MNRA

Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 1: Journal bearing performance

A 38.1 mm (1.5 inch) diameter Hydresil Compliant Surface Air Lubricated Journal Bearing was designed and tested to obtain bearing performance characteristics at both room temperature and 315 C (600 F). Testing was performed at various speeds up to 60,000 rpm with varying loads. Rotating sensors provided an opportunity to examine the film characteristics of the compliant surface bearing. In addition to providing minimum film thickness values and profiles, many other insights into bearing operation were gained such as the influence of bearing fabrication accuracy and the influence of smooth foil deflection between the bumps