101 research outputs found
2.0 AEDL Systems Engineering
Some engineering topics: Some Initial Thoughts. Capability Description. Capability State-of-the-Art. Capability Requirements. Systems Engineering. Capability Roadmap. Capability Maturity. Candidate Technologies. Metrics
Kinetic Studies on Ni-YSZ Composite Electrodes
AC and DC techniques were applied to investigate the electrochemical reaction kinetics of porous composite Ni/8-mol% yttria-stabilized zirconia (Ni/8YSZ) solid oxide cell (SOC) electrodes using a novel pseudo-3-electrode cell geometry. From OCV impedance spectra an activation energy Ea
of 1.13 eV, pre-factor γan
of 3.7∙105∙T, hydrogen and steam partial pressure dependencies a and b respectively of -0.07 and 0.22 were determined. DC current density vs. overpotential curves compared with those predicted using the determined kinetic parameters. Apparent Butler-Volmer charge transfer coefficients α were determined from the current density vs. overpotential curves. Values ranging from 0.57 at 650 °C to 0.64 at 850 °C were determined from the anodic branch and 0.85 to 0.81 from the cathodic branch in the same range, with higher fitting accuracy in the anodic branch. The lower fitting accuracy of the cathodic branch and the need for different α values for each branch suggests that a simple BV model of the measured electrode kinetics is insufficient and/or different reaction mechanisms might be occurring in anodic vs cathodic polarization.</jats:p
Mars Exploration Rover Flight Operations Technical Consultation
The Mars Exploration Rover (MER) Project at the Jet Propulsion Laboratory developed two golf-cart size robotic vehicles, Spirit and Opportunity, for geological exploration of designated target areas on the surface of Mars. The primary scientific objective of these missions was the search for evidence of the presence of water on or near the surface of the planet during its history. Spirit and Opportunity were launched on June 10 and July 7, 2003, with their respective landings scheduled for January 4 and January 25, 2004 (UTC). NASA views the MER missions as particularly critical because of their scientific importance in the ongoing search for conditions under which life might have existed elsewhere in the solar system, because of their high level of public interest and because more than half of all prior missions launched to Mars internationally have failed. This report summarizes the findings and recommendations of the NASA Engineering and Safety Center review of the project
Human Planetary Landing System (HPLS) Capability Roadmap NRC Progress Review
Capability Roadmap Team. Capability Description, Scope and Capability Breakdown Structure. Benefits of the HPLS. Roadmap Process and Approach. Current State-of-the-Art, Assumptions and Key Requirements. Top Level HPLS Roadmap. Capability Presentations by Leads. Mission Drivers Requirements. "AEDL" System Engineering. Communication & Navigation Systems. Hypersonic Systems. Super to Subsonic Decelerator Systems. Terminal Descent and Landing Systems. A Priori In-Situ Mars Observations. AEDL Analysis, Test and Validation Infrastructure. Capability Technical Challenges. Capability Connection Points to other Roadmaps/Crosswalks. Summary of Top Level Capability. Forward Work
MSL Entry, Descent and Landing Performance and Environments
A viewgraph presentation on the MARS Science Laboratory (MSL) Entry, Descent and Landing (EDL) performance and environments is shown. The topics include: 1) High Altitude and Precision Landing; 2) Guided, Lifting, Ballistic Trade; 3) Supersonic Chute Deploy Altitude; 4) Guided, Lifting, Ballistic Landing Footprint Video; 5) Transition Indicator at Peak Heating Point on Trajectory; 6) Aeroheating at Peak Heating Point on Trajectory Nominal, No Uncertainty Included; 7) Comparison to Previous Missions; 8) Pork Chop Plots - EDL Performance for Mission Design; 9) Max Heat Rate Est (CBE+Uncert) W/cm2; 10) Nominal Super Chute Deploy Alt Above MOLA (km); 11) Monte Carlo; 12) MSL Option M2 Entry, Descent and Landing; 13) Entry Performance; 14) Entry Aeroheating and Entry g's; 15) Terminal Descent; and 16) How An Ideal Chute Deployment Altitude Varies with Time of Year and Latitude (JSC Chart)
Recommended from our members
Laser Drilling: Drilling with the Power of Light Phase 1: Feasibility Study
A laser drilling research team was formed from members of academia, industry and national laboratory to explore the feasibility of using modern high-powered lasers to drill and complete oil and gas wells. The one-year Phase 1 study discussed in this report had the goals of quantifying the amount of pulsed infrared laser energy needed to spall and melt rock of varying lithologies and to investigate the possibility of accomplishing the same task in water under atmospheric conditions. Previous work by some members of this team determined that continuous wave lasers of varying wavelengths have more than enough power to cut, melt and vaporize rock. Samples of sandstone, limestone, and shale were prepared for laser beam interaction with a 1.6 kW pulsed Nd:YAG laser beam to determine how the beam's size, power, repetition rate, pulse width, exposure time and energy can affect the amount of energy transferred to the rock for the purposes of spallation, melting and vaporization. The purpose of the laser rock interaction experiment was to determine the threshold parameters required to remove a maximum rock volume from the samples while minimizing energy input. Absorption of radiant energy from the laser beam gives rise to the thermal energy transfer required for the destruction and removal of the rock matrix. Results from the tests indicate that each rock type has a set of optimal laser parameters to minimize specific energy (SE) values as observed in a set of linear track and spot tests. In addition, it was observed that the rates of heat diffusion in rocks are easily and quickly overrun by absorbed energy transfer rates from the laser beam to the rock. As absorbed energy outpaces heat diffusion by the rock matrix, local temperatures can rise to the melting points of the minerals and quickly increase observed SE values. The lowest SE values are obtained in the spalling zone just prior to the onset of mineral melt. The current study determined that using pulsed lasers could accomplish removing material from rock more efficiently than continuous wave lasers. The study also determined that reducing the effect of secondary energy absorbing mechanisms resulted in lower energy requirements in shale and, to some extent, in sandstones. These secondary mechanisms are defined as physical processes that divert beam energy from directly removing rock, and may include thermally-induced phase behavior changes of rock minerals (i.e., melting, vaporization, and dissociation) and fractures created by thermal expansion. Limestone is spalled by a different mechanism and does not seem to be as affected by secondary mechanisms. It was also shown that the efficiency of the cutting mechanism improved by saturating porous rock samples with water, and that a laser beam injected directly through a water layer at a sandstone sample was able to spall and melt the sample
Le Forum, Vol. 43 No. 2
https://digitalcommons.library.umaine.edu/francoamericain_forum/1100/thumbnail.jp
- …