Soft Glass Equiangular Spiral Photonic Crystal Fiber for Supercontinuum Generation

An equiangular spiral photonic crystal fiber (ES-PCF) design in soft glass is presented that has high nonlinearity ( gamma > 5250 W-1 middot km-1 at 1064 nm and gamma > 2150 W-1 middot km-1 at 1550 nm) with a low and flat dispersion (D ~ 0.8 ps/kmmiddotnm and dispersion slope ~ -0.7 ps/km middot nm2 at 1060 nm). The design inspired by nature is characterized by a full-vectorial finite element method. The ES-PCF presented improves over the mode confinement of triangular core designs and dispersion control of conventional hexagonal PCF, combining the advantages of both designs; it can be an excellent candidate for generating supercontinuum pumped at 1.06 mum

Metal-Coated Defect-Core Photonic Crystal Fiber for THz Propagation

Modal solutions for metal-coated defect-core photonic crystal fiber (PCF) with a central air-hole have been obtained by using a full-vectorial finite element method to model the guidance of THz waves. It has been shown that the surface plasmon modes can couple with the defect-core PCF mode to form supermodes, with potential for sensing applications

Stabilized large mode area in tapered photonic crystal fiber for stable coupling

A rigorous modal solution approach based on the numerically efficient finite element method (FEM) has been used to design a tapered photonic crystal fiber with a large mode area that could be efficiently coupled to an optical fiber. Here, for the first time, we report that the expanded mode area can be stabilized against possible fabrication tolerances by introducing a secondary surrounding waveguide with larger air holes in the outer ring. A full-vectorial -field approach is employed to obtain mode field areas along the tapered section, and the Least Squares Boundary Residual (LSBR) method is used to obtain the coupling coefficients to a butt-coupled fiber

Numerical analysis of second harmonic generation in soft glass equiangular spiral photonic crystal fibers

In this paper, the accurate and numerically efficient finite element (FE)-based beam propagation method (BPM) has been employed to investigate second harmonic generation (SHG) in highly nonlinear soft glass (SF57) equiangular spiral photonic crystal fibers (ES-PCFs) for the first time. It is shown here that the SHG output power in highly nonlinear SF57 soft glass PCF exploiting the ES design is significantly higher compared with that of silica PCF with hexagonal air-hole arrangements. The effects of fabrication tolerances on the coherence length and the modal properties of ES-PCF are also illustrated. Moreover, phase matching between the fundamental and the second harmonic modes is discussed through the use of the quasi-phase matching technique. Furthermore, the ultralow bending loss in the SF57 ES-PCF design has been successfully analyzed

Characterization of silicon nanowire by use of full-vectorial finite element method.

We have carried out a rigorous H-field-based full-vectorial modal analysis and used it to characterize, more accurately, the abrupt dielectric discontinuity of a high index contrast optical waveguide. The full-vectorial H and E fields and the Poynting vector profiles are described in detail. It has been shown through this work that the mode profile of a circular silicon nanowire is not circular and also contains a strong axial field component. The single-mode operation, vector field profiles, modal hybridness, modal ellipticity, and group velocity dispersion of this silicon nanowire are also presented

Ultra low bending loss equiangular spiral photonic crystal fibers in the terahertz regime

An Equiangular Spiral Photonic Crystal Fiber (ES-PCF) design in Topas® for use in the Terahertz regime is presented. The design shows ultra low bending loss and very low confinement loss compared to conventional Hexagonal PCF (H-PCF). The ES-PCF has excellent modal confinement properties, together with several parameters to allow the optimization of the performance over a range of important characteristics. A full vector Finite Element simulation has been used to characterize the design which can be fabricated by a range of techniques including extrusion and drilling

Fast response time fiber optical pH and oxygen sensors

While fluorescence-based fiber optic sensors for measuring both pH and oxygen concentration (O2) are well known, current sensors are often limited by their response time and drift, which limits the use of existing fiber optic sensors of this type in wider applications, for example in physiology and other fields. Several new fiber optical sensors have been developed and optimized, with respect to key features such as tip shape and coating layer thickness. In this work, preliminary results on the performance of a suite of pH sensors with fast response times, < 3 second and oxygen sensors (O2) with response times < 0.2 second. The sensors have been calibrated and their performance analyzed using the Henderson–Hasselbalch equation (pH) and classic Lehrer-model (O2)

Flow measurement inside a zinc-nickel flow cell battery using FBG based sensor system

Downloading of the abstract is permitted for personal use only. A detailed knowledge of the internal flow distribution inside a zinc-nickel flow battery is of critical importance to ensure smooth flow of the electrolyte through the battery cell and better operation of the device. Information of this type can be used as a useful means of early detection of zinc deposition and dendrite formation inside the cell, negative factors which affect the flow and thus which can lead to internal short circuiting, this being a primary failure mode of these types of batteries. This deposition occurs at low pH levels when zinc reacts with the electrolyte to form solid zinc oxide hydroxides. Traditionally, manual inspection is conducted, but this is time consuming and costly, only providing what are often inaccurate results-overall it is an impractical solution especially with the wider use of batteries in the very near future. Fibre Bragg grating (FBG) sensors integrated inside the flow cell offer the advantage of measuring flow changes at multiple locations using a single fibre and that then can be used as an indicator of the correlation between the internal flow distribution and the deposition characteristics. This work presents an initial study, where two networks of FBGs have been installed and used for flow change detection in an active zinc-nickel flow battery. Data have been obtained from the sensor networks and information of battery performance completed and summarized in this paper. The approach shows promising results and thus scope for the future research into the development of this type of sensor system

In-sewer field-evaluation of an optical fibre-based condition monitoring system

A Fiber Bragg Grating (FBG) based monitoring system for continuous humidity and temperature measurement has been designed and evaluated experimentally in a sewer environment with high corrosion rates, humidity and the presence of gaseous hydrogen sulfide. The monitoring system has been designed specifically for field use, including packaging prepared for the harsh environment and the challenges of the operation. The system is battery powered and has hardware for controlling the interrogation equipment, power management, data logging and 4G connectivity. Results obtained show the long-term performance, over a 6-month period of non-stop monitoring of real-time data using the same probe. The data acquired was compared to the environmental data of temperature and precipitation for this period from the same location, which showed a good correlation between the expected and the measured data values. The data obtained point to the success of the optical fibre-based sensor system for monitoring in these harsh environments over long periods

Development of low cost packaged fibre optic sensors for use in reinforced concrete structures

There is an ongoing need to measure strains in reinforced concrete structures more reliably and under a range of circumstances e.g. long term durability (such as effects of cracking and reinforcement corrosion), response to normal working loads and response under abnormal load conditions. Fibre optic sensors have considerable potential for this purpose and have the additional advantages, including of immunity to electromagnetic interference and light weight (Grattan et al., 2000). This is important in railway scenarios and particularly so when the lines are electrified. Their small size allows for easy installation. However, their use as commercial ‘packaged’ devices (traditionally seen as necessary to achieve adequate robustness) is limited by their high cost relative to other sensor devices such as encapsulated electric resistance strain gauges. This paper describes preliminary work to produce a cost-effective and easy-to-use technique for encapsulating fibre optic sensors in resin using 3D printing techniques to produce a robust, inexpensive ‘packaged’ sensor system suitable for use with concrete structures. The work done to date has shown this to be a convenient and economical way of producing multiple sensors which were suitable for both surface mounting and embedment in reinforced concrete structures. The proof-of-concept testing to which the trial packages were subjected is described in the paper and the results indicate that 3D printed packages have considerable potential for further development and use in a variety of civil engineering applications, competing well with more conventional sensor systems