The recent 2007 Portugal earthquake (Mw=6.1) in the seismotectonic context of the SW Atlantic area

An event of magnitude Mw 6.1(EMSC) occurred on 12/02/2007 at 10:35 UTC off coast of South-Western Portugal. The earthquake had its epicentre in the eastern Horseshoe Abyssal Plain, at 175 km South-West of San Vicente Cape (Figure 1). This earthquake is the largest earthquake since the great instrumental earthquake, Ms=8.0 (USGS), occurred on February 28th, 1969 in the same epicentral area. This earthquake was followed by four small aftershocks with magnitude less or equal to 3.5. There has been no reported damage associated to the event since habitated regions are too far away from the epicentre. This event has been widely felt in Portugal, particularly in the Algarve Region (I=IV – IM information), Southern Spain and Western Morocco and up to 700 km away of the epicentre (Salamanca, Madrid) (EMSC report in http://www.emsc-csem.org)

Strong ground motion in southern Portugal due to the 1755 Lisbon earthquake

The strong earthquake (M=8.8) that struck a large part of the Iberian Peninsula and Northern Morocco on November 1, 1755, was caused by the motion along a fault which localisation and spatial extent are still uncertain. According to recent numerical modelling of tsunami wave travel times, it seems that the tsunamigenic fault may be lo- cated off the southwestern coast of Portugal. Multi-channel seismic profiles in the area showed the existence of large submarine hills of tectonic origin, 100 km offshore Cabo de São Vincente, and led to the identification of active faults that may be responsible for the earthquake. E3D, a finite-difference seismic wave propagation code, is used to implement various source rupture scenarios. Based on available geophysical data and geological evidences, we propose a 3D velocity model of the upper mantle, crust, and sedimentary cover, for south Portugal and the adjacent Atlantic area. The model is constrained thanks to data available from recent instrumental earthquakes. We are able to test several possibilities, and to compare synthetic ground motion obtained onshore with historical evaluations of seismic intensity. Directivity of the source, as well as site effects, may explain the particular distribution of strong ground motion observations

Survey of Dairy Management Practices on One Hundred Thirteen North Central and Northeastern United States Dairies

The objective was to conduct a broad survey of dairy management practices that have an effect on animal well-being. Dairies were visited during the fall and winter of 2005 and 2006 in Wisconsin, Minnesota, Indiana, Iowa, and New York. Data were collected on 113 dairies on colostrum feeding, dehorning, tail-docking, euthanasia methods, producer statements about welfare, use of specialized calf-raising farms (custom), level of satisfaction with calf-raising by producers, and cow behavior. Calves were raised by the owner on 50.4% of dairies; 30.1% were raised on custom farms during the milk-feeding period, 18.6% were custom raised after weaning, and 1% sold calves with the option to buy them back as first-lactation heifers. A total of 51.8% of producers were very satisfied with their current calf-raising methods. Three feedings of colostrum were fed to the calves on 23.9% of dairies, 2 feedings on 39.8% of farms, 1 feeding on 31.0% of farms, and colostrum replacement products were fed on 5.3% of farms. Many farms (61.9%) provided 3.8 L at first feeding. Calves were dehorned at different ages by various methods. By 8 wk, 34.5% of calves were dehorned. By 12 wk, 78.8% of calves were dehorned. The majority of calves were dehorned by hot iron (67.3%). The remainder were dehorned by gouging (8.8%), paste (9.7%), saw (3.5%), or unknown by calf owner (10.6%). Anesthetic use was reported by 12.4% of dairy owners and analgesia use by 1.8%. Tail-docking was observed on 82.3% of dairies. The most common reported docking time was pre- or postcalving (35.2%). The second most commonly reported time was d 1 (15.4%). Rubber band was the most common method (92.5%), followed by amputation (7.5%). Three dairies amputated precalving, 1 at 2 mo and 3 at d 1 or 2. Cow hygiene was the most common reason given to dock (73.5%), followed by parlor worker comfort (17.4%) and udder health (1.0%). Producers reported 2.0% of cows obviously lame. Gun was the preferred euthanasia method (85.7%), followed by i.v. euthanasia (8.0%), live pick-up (1.8%), and nondisclosure (3.5%). Most producers (77.9%) stated that cows were in an improved environment as compared with 20 yr ago, whereas 8.0% stated conditions were worse, and 14.2% were undecided. Dairies with higher percentages of cows that either approached or touched the observer had lower somatic cell counts. The survey results showed management practices that were important for animal welfare

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

Influence of Free-Stall Base on Tarsal Joint Lesions and Hygiene in Dairy Cows

The objective was to quantify the incidence of tarsal lesions and level of hygiene by stall bed type. Cows were scored on 100 dairies from Wisconsin, Minnesota, Indiana, Iowa, and New York in the fall and winter. Thirty-eight dairies used rubber-filled mattresses (RFM), 27 had sand beds, 29 had waterbeds, and 6 used compost packs (CPk). Stocking density, stall dimensions, bedding amount, bedding frequency, and type of bedding were recorded. One pen of early-lactation multiparous cows on each dairy was scored based on injury of the tarsal joints at the lateral and medial surfaces and tuber calcis at the dorsal, lateral, and medial surfaces. A tarsal score of 1 represented hair loss, 2 was moderate, and 3 indicated severe swelling. Differences between bed types in the percentages of cows with lesions were tested with one-way ANOVA by lesion severity and incidence, with farm as the experimental unit. Cows on sand beds or waterbeds had fewer lesion scores of 1, 2, and 3 than those on RFM. The percentages of score 1 were 54.6 ± 4.4 (RFM), 22.5 ± 4.7 (sand), and 29.8 ± 4.3 (waterbed), whereas the percentages of score 2 were 14.0 ± 1.4, 2.3 ± 1.5, and 5.0 ± 1.4, and of score 3 were 3.0 ± 0.4, 0.2 ± 0.4, and 0.4 ± 0.4. Cows on CPk had no lesions. Hygiene scores ranged from 1 to 5, with 1 being clean and 5 soiled. The percentages of hygiene score 1 were 0 (compost), 0.4 (RFM), 0.4 (sand), and 0.4 (waterbeds); those with score 2 were 79.0, 84.0 ± 0.01, 73.2 ± 0.01, and 80.4 ± 0.01; with score 3 were 20.3, 15.2 ± 0.01, 23.8 ± 0.01, and 18.6 ± 0.01; with score 4 were 0.8, 0.005 ± 0.001, 0.006 ± 0.001, and 0.025 ± 0.003; and with score 5 was 0 for all bed types. Cows on RFM and waterbeds had improved hygiene compared with cows on sand beds. There was no difference in somatic cell count (SCC) by bed type. The percentage of cows in fourth lactation or greater on waterbeds (19.8 ± 1.8) was greater than those on RFM (13.3 ± 1.6) or on sand (13.5 ± 1.8). The percentage culled was lower for cows on waterbeds than on RFM (22.8 ± 1.5 vs. 29.4 ± 1.4). Score 3 tarsal lesions were correlated (r = 0.60) with SCC. The length of the sand bed was correlated with a greater percentage of mature cows. The SCC was correlated with the percentage of cows reported lame on the day of the visit (r = 0.45) and with neck rail height (r = −0.26). On dairies with RFM, severe lesions (r = 0.60), death losses (r = 0.52), and percentage of the herd reported lame on the day of the visit (r = 0.52) were all correlated with the SCC. Dairies with higher percentages of lesions had higher SCC, death losses, lameness, and culling rates. Adding bedding several times per week may reduce the incidence of lesions