120 research outputs found

    Dust Measurements in the Outer Solar System

    Get PDF
    Dust measurements in the outer solar system are reviewed. Only the plasma wave instrument on board Voyagers 1 and 2 recorded impacts in the Edgeworth-Kuiper belt (EKB). Pioneers 10 and 11 measured a constant dust flux of 10-micron-sized particles out to 20 AU. Dust detectors on board Ulysses and Galileo uniquely identified micron-sized interstellar grains passing through the planetary system. Impacts of interstellar dust grains onto big EKB objects generate at least about a ton per second of micron-sized secondaries that are dispersed by Poynting-Robertson effect and Lorentz force. We conclude that impacts of interstellar particles are also responsible for the loss of dust grains at the inner edge of the EKB. While new dust measurements in the EKB are in an early planning stage, several missions (Cassini and STARDUST) are en route to analyze interstellar dust in much more detail.Comment: 10 pages, 5 figures, Proceedings of the ESO workshop on ``Minor bodies in the outer solar system'

    Jovian dust streams: Probes of the Io plasma torus

    Full text link
    Jupiter was discovered to be a source of high speed dust particles by the Ulysses spacecraft in 1992. These dust particles originate from the volcanic plumes on Io. They collect electrostatic charges from the plasma environment, gain energy from the co-rotating electric field of the magnetosphere, and leave Jupiter with escape speeds over 200kms1\rm 200 km s^{-1}. The dust streams were also observed by the Galileo and Cassini spacecraft. While Ulysses and Cassini only had a single encounter with Jupiter, Galileo has continuously monitored the dust streams in the Jovian magnetosphere since 1996. The observed dust fluxes exhibit large orbit-to-orbit variability due to both systematic and stochastic changes. By combining the entire data set, the variability due to stochatic processes can be approximately removed and a strong variation with Jovian local time is found. This result is consistent with theoretical expectations and confirms that the majority of the Jovian dust stream particles originate from Io rather than other potential sources.Comment: 4 pages, 1 b/w figure, 2 color figures, accepted for Geophysical Research Letter

    Impact-Generated Dust Clouds Surrounding the Galilean Moons

    Full text link
    Tenuous dust clouds of Jupiter's Galilean moons Io, Europa, Ganymede and Callisto have been detected with the in-situ dust detector on board the Galileo spacecraft. The majority of the dust particles have been sensed at altitudes below five radii of these lunar-sized satellites. We identify the particles in the dust clouds surrounding the moons by their impact direction, impact velocity, and mass distribution. Average particle sizes are 0.5 to 1μm\rm 1 \mu m, just above the detector threshold, indicating a size distribution with decreasing numbers towards bigger particles. Our results imply that the particles have been kicked up by hypervelocity impacts of micrometeoroids onto the satellites' surfaces. The measured radial dust density profiles are consistent with predictions by dynamical modeling for satellite ejecta produced by interplanetary impactors (Krivov et al., PSS, 2003, 51, 251--269), assuming yield, mass and velocity distributions of the ejecta from laboratory measurements. The dust clouds of the three outer Galilean moons have very similar properties and are in good agreement with the model predictions for solid ice-silicate surfaces. The dust density in the vicinity of Io, however, is more than an order of magnitude lower than expected from theory. This may be due to a softer, fluffier surface of Io (volcanic deposits) as compared to the other moons. The log-log slope of the dust number density in the clouds vs. distance from the satellite center ranges between --1.6 and --2.8. Appreciable variations of number densities obtained from individual flybys with varying geometry, especially at Callisto, might be indicative of leading-trailing asymmetries of the clouds due to the motion of the moons with respect to the field of impactors.Comment: Icarus, in press, 46 pages, 16 figures, 5 table

    Interstellar Dust in the Solar System: Model versus In-Situ Spacecraft Data

    Full text link
    In the early 1990s, contemporary interstellar dust penetrating deep into the heliosphere was identified with the in-situ dust detector on board the Ulysses spacecraft. Later on, interstellar dust was also identified in the data sets measured with dust instruments on board Galileo, Cassini and Helios. Ulysses monitored the interstellar dust stream at high ecliptic latitudes for about 16 years. The three other spacecraft data sets were obtained in the ecliptic plane and cover much shorter time intervals.We compare in-situ interstellar dust measurements obtained with these four spacecrafts, published in the literature, with predictions of a state-of-the-art model for the dynamics of interstellar dust in the inner solar system (Interplanetary Meteoroid environment for EXploration, IMEX), in order to test the reliability of the model predictions. Micrometer and sub-micrometer sized dust particles are subject to solar gravity and radiation pressure as well as to the Lorentz force on a charged dust particle moving through the Interplanetary Magnetic Field. The IMEX model was calibrated with the Ulysses interstellar dust measurements and includes these relevant forces. We study the time-resolved flux and mass distribution of interstellar dust in the solar system. The IMEX model agrees with the spacecraft measurements within a factor of 2 to 3, also for time intervals and spatial regions not covered by the original model calibration with the Ulysses data set. It usually underestimates the dust fluxes measured by the space missions which were not used for the model calibration, i.e. Galileo, Cassini and Helios. IMEX is a unique time-dependent model for the prediction of interstellar dust fluxes and mass distributions for the inner and outer solar system. The model is suited to study dust detection conditions for past and future space missions.Comment: 24 pages, 7 figures, 1 tabl

    Counter Data of the Cosmic Dust Analyzer aboard the Cassini spacecraft and possible "dust clouds" at Saturn

    Full text link
    We present the impact rates of dust particles recorded by the Cosmic Dust Analyzer (CDA) aboard the Cassini spacecraft. The "dust counters" evaluate the quality of an impact and give rise to the apparent density of dust particles in space. The raw data is pre-selected and refined to a new structure that serves to a better investigation of densities, flows, and properties of interplanetary dust grains. Our data is corrected for the dead time of the instrument and corresponds to an assumed Kepler orbit (pointing of the sensitive area). The processed data are published on the website for the Magnetosphere and Plasma Science (MAPSview), where it can be correlated with other Cassini instruments. A sample is presented for the Titan flyby on DOY 250/2006. We find that the dust density peaks at two times, at least, in a void region between Titan and Rhea. Such features may point to extended clouds of small particles drifting slowly in space. These density clouds seem to be stable for as long as several months or few years before dispersing.Comment: 16 pages, 5 figure

    Heliospheric modulation of the interstellar dust flow on to Earth

    Full text link
    Aims. Based on measurements by the Ulysses spacecraft and high-resolution modelling of the motion of interstellar dust (ISD) through the heliosphere we predict the ISD flow in the inner planetary system and on to the Earth. This is the third paper in a series of three about the flow and filtering of the ISD. Methods. Micrometer- and sub-micrometer-sized dust particles are subject to solar gravity and radiation pressure as well as to interactions with the interplanetary magnetic field that result in a complex size-dependent flow pattern of ISD in the planetary system. With high-resolution dynamical modelling we study the time-resolved flux and mass distribution of ISD and the requirements for detection of ISD near the Earth. Results. Along the Earth orbit the density, speed, and flow direction of ISD depend strongly on the Earth's position and the size of the interstellar grains. A broad maximum of the ISD flux (2x10^{-4}/m^2/s of particles with radii >~0.3\mu m) occurs in March when the Earth moves against the ISD flow. During this time period the relative speed with respect to the Earth is highest (~60 km/s), whereas in September when the Earth moves with the ISD flow, both the flux and the speed are lowest (<~10 km/s). The mean ISD mass flow on to the Earth is ~100 kg/year with the highest flux of ~3.5kg/day occurring for about 2 weeks close to the end of the year when the Earth passes near the narrow gravitational focus region downstream from the Sun. The phase of the 22-year solar wind cycle has a strong effect on the number density and flow of sub-micrometer-sized ISD particles. During the years of maximum electromagnetic focussing (year 2031 +/- 3) there is a chance that ISD particles with sizes even below 0.1\mu m can reach the Earth. Conclusions. We demonstrate that ISD can be effectively detected, analysed, and collected by space probes at 1 AU distance from the Sun.Comment: 17 pages, 17 figure

    Techniques for Galactic Dust Measurements in the Heliosphere

    Get PDF
    Galactic interstellar dust (ISD) is the major ingredient in planetary formation. However, information on this important material has been extremely limited. Recently the Ulysses dust detector has identified and measured interstellar dust outside 1.8~AU from the Sun at ecliptic latitudes above 5050^{\circ}. Inside this distance it could not reliably distinguish interstellar from interplanetary dust. Modeling the Ulysses data suggests that up to 30 % of dust flux with masses above 1016kg10^{-16}\rm kg at 1~AU is of interstellar origin. From the Hiten satellite in high eccentric orbit about the Earth there are indications that ISD indeed reaches the Earth's orbit. Two new missions carrying dust detectors, Cassini and Stardust, will greatly increase our observational knowledge. In this paper we briefly review instruments used on these missions and compare their capabilities. The Stardust mission [{\em Brownlee et al.}, 1996] will analyze the local interstellar dust population by an in-situ chemical analyzer and collect ISD between 2 and 3~AU from the Sun. The dust analyzer on the Cassini mission will determine the interstellar dust flux outside Venus' orbit and will provide also some compositional information. Techniques to identify the ISD flux levels at 1~AU are described that can quantify the interstellar dust flux in high-Earth orbit (outside the debris belts) and provide chemical composition information of galactic dust.Comment: Accepted for Journal of Geophysical Research, 6 figures, Late

    Galileo In-Situ Dust Measurements in Jupiter's Gossamer Rings

    Full text link
    During its late orbital mission at Jupiter the Galileo spacecraft made two passages through the giant planet's gossamer ring system. The impact-ionization dust detector on board successfully recorded dust impacts during both ring passages and provided the first in-situ measurements from a dusty planetary ring. In all, a few thousand dust impacts were counted with the instrument accumulators during both ring passages, but only a total of 110 complete data sets of dust impacts were transmitted to Earth. Detected particle sizes range from about 0.2 to 5 micron, extending the known size distribution by an order of magnitude towards smaller particles than previously derived from optical imaging (Showalter et al. 2008). The grain size distribution increases towards smaller particles and shows an excess of these tiny motes in the Amalthea gossamer ring compared to the Thebe ring. The size distribution for the Amalthea ring derived from our in-situ measurements for the small grains agrees very well with the one obtained from images for large grains. Our analysis shows that particles contributing most to the optical cross-section are about 5 micron in radius, in agreement with imaging results. The measurements indicate a large drop in particle flux immediately interior to Thebe's orbit and some detected particles seem to be on highly-tilted orbits with inclinations up to 20 deg.Comment: 13 figures, 4 tables, submitted to Icaru
    corecore