Fiber Bragg Grating Sensor System for Monitoring Smart Composite Aerospace Structures

Lightweight, electromagnetic interference (EMI) immune, fiber-optic, sensor- based structural health monitoring (SHM) will play an increasing role in aerospace structures ranging from aircraft wings to jet engine vanes. Fiber Bragg Grating (FBG) sensors for SHM include advanced signal processing, system and damage identification, and location and quantification algorithms. Potentially, the solution could be developed into an autonomous onboard system to inspect and perform non-destructive evaluation and SHM. A novel method has been developed to massively multiplex FBG sensors, supported by a parallel processing interrogator, which enables high sampling rates combined with highly distributed sensing (up to 96 sensors per system). The interrogation system comprises several subsystems. A broadband optical source subsystem (BOSS) and routing and interface module (RIM) send light from the interrogation system to a composite embedded FBG sensor matrix, which returns measurand-dependent wavelengths back to the interrogation system for measurement with subpicometer resolution. In particular, the returned wavelengths are channeled by the RIM to a photonic signal processing subsystem based on powerful optical chips, then passed through an optoelectronic interface to an analog post-detection electronics subsystem, digital post-detection electronics subsystem, and finally via a data interface to a computer. A range of composite structures has been fabricated with FBGs embedded. Stress tensile, bending, and dynamic strain tests were performed. The experimental work proved that the FBG sensors have a good level of accuracy in measuring the static response of the tested composite coupons (down to submicrostrain levels), the capability to detect and monitor dynamic loads, and the ability to detect defects in composites by a variety of methods including monitoring the decay time under different dynamic loading conditions. In addition to quasi-static and dynamic load monitoring, the system can capture acoustic emission events that can be a prelude to structural failure, as well as piezoactuator-induced ultrasonic Lamb-waves-based techniques as a basis for damage detection

Design and Optimization of Composite Gyroscope Momentum Wheel Rings

Stress analysis and preliminary design/optimization procedures are presented for gyroscope momentum wheel rings composed of metallic, metal matrix composite, and polymer matrix composite materials. The design of these components involves simultaneously minimizing both true part volume and mass, while maximizing angular momentum. The stress analysis results are combined with an anisotropic failure criterion to formulate a new sizing procedure that provides considerable insight into the design of gyroscope momentum wheel ring components. Results compare the performance of two optimized metallic designs, an optimized SiC/Ti composite design, and an optimized graphite/epoxy composite design. The graphite/epoxy design appears to be far superior to the competitors considered unless a much greater premium is placed on volume efficiency compared to mass efficiency

Mechanical properties of triaxially braided composites: Experimental and analytical results

The unnotched tensile properties of 2-D triaxial braid reinforced composites from both an experimental and an analytical viewpoint are studied. The materials are graphite fibers in an epoxy matrix. Three different reinforcing fiber architectures were considered. Specimens were cut from resin transfer molded (RTM) composite panels made from each braid. There were considerable differences in the observed elastic constants from different size strain gage and extensometer reading. Larger strain gages gave more consistent results and correlated better with the extensometer reading. Experimental strains correlated reasonably well with analytical predictions in the longitudinal, 0 degrees, fiber direction but not in the transverse direction. Tensile strength results were not always predictable even in reinforcing directions. Minor changes in braid geometry led to disproportionate strength variations. The unit cell structure of the triaxial braid was discussed with the assistance of computer analysis of the microgeometry. Photomicrographs of braid geometry were used to improve upon the computer graphics representations of unit cells. These unit cells were used to predict the elastic moduli with various degrees of sophistication. The simple and the complex analyses were generally in agreement but none adequately matched the experimental results for all the braids

Calcium availability regulates antioxidant system, physio-biochemical activities and alleviates salinity stress mediated oxidative damage in soybean seedlings

Salinity is considered as one of the devastating abiotic stress factors and global climate change has further worsened the situation. Present experiments were aimed to evaluate the role of calcium (Ca) availability on growth and salinity tolerance mechanisms in soybean. Seedlings were grown with (2 mM Ca) and without Ca supplementation and modulation in key physiological and biochemical parameters were studied. Salinity (100 mM NaCl) stress resulted in growth reduction in terms of height and biomass accumulation, which was more pronounced in Ca-deficient plants. Relative to control (Ca deficient) and NaCl stressed plants, Ca supplemented seedlings exhibited higher relative water content, pigment synthesis and the photosynthetic efficiency. Ca availability affected the synthesis of proline, glycine betaine and soluble sugars under normal and saline growth conditions. Optimal Ca supplementation up-regulated the activities of antioxidant enzymes assayed and the contents of non-enzymatic antioxidants (ascorbate, glutathione, and tocopherol) thereby reflecting in amelioration of NaCl induced oxidative damage. Moreover, increased accumulation of phenols due to Ca supplementation and the amelioration of NaCl mediated decline if nitrate reductase activity was observed. More importantly, Ca availability reduced the accumulation of Na under control and NaCl stressed conditions restricting the damging effects on metabolism. Availability of optimal Ca potentially regulates the salinity tolerance mechanisms in soybean by maintaining osmoregulation and antioxidant metabolism

Tensile Creep and Fatigue of Sylramic-iBN Melt-Infiltrated SiC Matrix Composites: Retained Properties, Damage Development, and Failure Mechanisms

An understanding of the elevated temperature tensile creep, fatigue, rupture, and retained properties of ceramic matrix composites (CMC) envisioned for use in gas turbine engine applications are essential for component design and life-prediction. In order to quantify the effect of stress, time, temperature, and oxidation for a state-of-the-art composite system, a wide variety of tensile creep, dwell fatigue, and cyclic fatigue experiments were performed in air at 1204 C for the SiC/SiC CMC system consisting of Sylramic-iBN SiC fibers, BN fiber interphase coating, and slurry-cast melt-infiltrated (MI) SiC-based matrix. Tests were either taken to failure or interrupted. Interrupted tests were then mechanically tested at room temperature to determine the residual properties. The retained properties of most of the composites subjected to tensile creep or fatigue were usually within 20% of the as-produced strength and 10% of the as-produced elastic modulus. It was observed that during creep, residual stresses in the composite are altered to some extent which results in an increased compressive stress in the matrix upon cooling and a subsequent increased stress required to form matrix cracks. Microscopy of polished sections and the fracture surfaces of specimens which failed during stressed-oxidation or after the room-temperature retained property test was performed on some of the specimens in order to quantify the nature and extent of damage accumulation that occurred during the test. It was discovered that the distribution of stress-dependent matrix cracking at 1204 C was similar to the as-produced composites at room temperature; however, matrix crack growth occurred over time and typically did not appear to propagate through thickness except at final failure crack. Failure of the composites was due to either oxidation-induced unbridged crack growth, which dominated the higher stress regime (> 179 MPa) or controlled by degradation of the fibers, probably caused by intrinsic creep-induced flaw growth of the fibers or internal attack of the fibers via Si diffusion through the CVI SiC and/or microcracks at the lower stress regime (< 165 MPa)

A mediation approach to understanding socio-economic inequalities in maternal health-seeking behaviours in Egypt.

BACKGROUND: The levels and origins of socio-economic inequalities in health-seeking behaviours in Egypt are poorly understood. This paper assesses the levels of health-seeking behaviours related to maternal care (antenatal care [ANC] and facility delivery) and their accumulation during pregnancy and childbirth. Secondly, it explores the mechanisms underlying the association between socio-economic position (SEP) and maternal health-seeking behaviours. Thirdly, it examines the effectiveness of targeting of free public ANC and delivery care. METHODS: Data from the 2008 Demographic and Health Survey were used to capture two latent constructs of SEP: individual socio-cultural capital and household-level economic capital. These variables were entered into an adjusted mediation model, predicting twelve dimensions of maternal health-seeking; including any ANC, private ANC, first ANC visit in first trimester, regular ANC (four or more visits during pregnancy), facility delivery, and private delivery. ANC and delivery care costs were examined separately by provider type (public or private). RESULTS: While 74.2% of women with a birth in the 5-year recall period obtained any ANC and 72.4% delivered in a facility, only 48.8% obtained the complete maternal care package (timely and regular facility-based ANC as well as facility delivery) for their most recent live birth. Both socio-cultural capital and economic capital were independently positively associated with receiving any ANC and delivering in a facility. The strongest direct effect of socio-cultural capital was seen in models predicting private provider use of both ANC and delivery. Despite substantial proportions of women using public providers reporting receipt of free care (ANC: 38%, delivery: 24%), this free-of-charge public care was not effectively targeted to women with lowest economic resources. CONCLUSIONS: Socio-cultural capital is the primary mechanism leading to inequalities in maternal health-seeking in Egypt. Future studies should therefore examine the objective and perceived quality of care from different types of providers. Improvements in the targeting of free public care could help reduce the existing SEP-based inequalities in maternal care coverage in the short term

Matrix Cracking of Ceramic-Matrix Composites

In this chapter, the matrix cracking of fiber-reinforced ceramic-matrix composites (CMCs) is investigated using the energy balance approach. The relationship between the matrix cracking stress, fiber and interface oxidation, and fiber failure is established. The effects of the fiber volume, interface shear stress and interface debonding energy, fiber failure, and oxidation temperature on the time-dependent matrix cracking stress are analyzed. The experimental matrix cracking stress of different fiber-reinforced CMCs is predicted using the present models