Sensitivity of the spherical gravitational wave detector MiniGRAIL operating at 5 K

We present the performances and the strain sensitivity of the first spherical gravitational wave detector equipped with a capacitive transducer and read out by a low noise two-stage SQUID amplifier and operated at a temperature of 5 K. We characterized the detector performance in terms of thermal and electrical noise in the system output sygnal. We measured a peak strain sensitivity of $1.5\cdot 10^{-20} Hz^{-1/2}$ at 2942.9 Hz. A strain sensitivity of better than $5\cdot 10{-20}Hz{-1/2}$ has been obtained over a bandwidth of 30 Hz. We expect an improvement of more than one order of magnitude when the detector will operate at 50 mK. Our results represent the first step towards the development of an ultracryogenic omnidirectional detector sensitive to gravitational radiation in the 3kHz range.Comment: 8 pages, 5 figures, submitted to Physical Review

A High-Throughput Mechanical Activator for Cartilage Engineering Enables Rapid Screening of in vitro Response of Tissue Models to Physiological and Supra-Physiological Loads

Articular cartilage is crucially influenced by loading during development, health, and disease. However, our knowledge of the mechanical conditions that promote engineered cartilage maturation or tissue repair is still incomplete. Current in vitro models that allow precise control of the local mechanical environment have been dramatically limited by very low throughput, usually just a few specimens per experiment. To overcome this constraint, we have developed a new device for the high throughput compressive loading of tissue constructs: the High Throughput Mechanical Activator for Cartilage Engineering (HiT-MACE), which allows the mechanoactivation of 6 times more samples than current technologies. With HiT-MACE we were able to apply cyclic loads in the physiological (e.g., equivalent to walking and normal daily activity) and supra-physiological range (e.g., injurious impacts or extensive overloading) to up to 24 samples in one single run. In this report, we compared the early response of cartilage to physiological and supra-physiological mechanical loading to the response to IL-1β exposure, a common but rudimentary in vitro model of cartilage osteoarthritis. Physiological loading rapidly upregulated gene expression of anabolic markers along the TGF-β1 pathway. Notably, TGF-β1 or serum was not included in the medium. Supra-physiological loading caused a mild catabolic response while IL-1β exposure drove a rapid anabolic shift. This aligns well with recent findings suggesting that overloading is a more realistic and biomimetic model of cartilage degeneration. Taken together, these findings showed that the application of HiT-MACE allowed the use of larger number of samples to generate higher volume of data to effectively explore cartilage mechanobiology, which will enable the design of more effective repair and rehabilitation strategies for degenerative cartilage pathologies

Complete model of a spherical gravitational wave detector with capacitive transducers. Calibration and sensitivity optimization

We report the results of a detailed numerical analysis of a real resonant spherical gravitational wave antenna operating with six resonant two-mode capacitive transducers read out by superconducting quantum interference devices (SQUID) amplifiers. We derive a set of equations to describe the electro-mechanical dynamics of the detector. The model takes into account the effect of all the noise sources present in each transducer chain: the thermal noise associated with the mechanical resonators, the thermal noise from the superconducting impedance matching transformer, the back-action noise and the additive current noise of the SQUID amplifier. Asymmetries in the detector signal-to-noise ratio and bandwidth, coming from considering the transducers not as point-like objects but as sensor with physically defined geometry and dimension, are also investigated. We calculate the sensitivity for an ultracryogenic, 30 ton, 2 meter in diameter, spherical detector with optimal and non-optimal impedance matching of the electrical read-out scheme to the mechanical modes. The results of the analysis is useful not only to optimize existing smaller mass spherical detector like MiniGrail, in Leiden, but also as a technological guideline for future massive detectors. Furthermore we calculate the antenna patterns when the sphere operates with one, three and six resonators. The sky coverage for two detectors based in The Netherlands and Brasil and operating in coincidence is also estimated. Finally, we describe and numerically verify a calibration and filtering procedure useful for diagnostic and detection purposes in analogy with existing resonant bar detectors.Comment: 23 pages, 20 figures, codes of the simulations are available on request by contacting the autho

Intrinsic defects and their influence on the chemical and optical properties of TiO2x films

International audienceIn this work, TiO2 films produced by rf sputtering of a TiO2 target in argon and argon–oxygen plasmas were studied. The oxygen content in the feed gas was varied in a range 3–20%. The chemical composition and structure of films were characterized by Rutherford backscattering spectrometry, x-ray photoelectron spectroscopy (XPS) and x-ray diffraction. Important information about the intrinsic defects of the films and their effects on the optical properties as well as a scheme of the energy band structure of the films could be derived from a combined use of optical spectroscopy and XPS

MiniGRAIL progress report 2004

The MiniGRAIL detector was improved. The sphere was replaced by a slightly larger one, having a diameter of 68 cm (instead of 65 cm), reducing the resonant frequency by about 200 Hz to around 2.9 kHz. The last four masses of the attenuation system were machined to increase their resonant frequency and improve the attenuation around the resonant frequency of the sphere. In the new sphere, six holes were machined on the TIGA positions for easy mounting of the transducers. During the last cryogenic run, two capacitive transducers and a calibrator were mounted on the sphere. The first transducer was coupled to a double-stage SQUID amplifier having a commercial quantum design SQUID as a first stage and a DROS as a second stage. The second transducer was read by a single-stage quantum design SQUID. During the cryogenic run, the sphere was cooled down to 4 K. The two-stage SQUID had a flux noise of about 1.6 μ0 Hz−1/2. The detector was calibrated and the sensitivity curve of MiniGRAIL was determined

3D INTEGRATED METHODOLOGIES FOR THE DOCUMENTATION AND THE VIRTUAL RECONSTRUCTION OF AN ARCHAEOLOGICAL SITE

Highly accurate documentation and 3D reconstructions are fundamental for analyses and further interpretations in archaeology. In the last years the integrated digital survey (ground-based survey methods and UAV photogrammetry) has confirmed its main role in the documentation and comprehension of excavation contexts, thanks to instrumental and methodological development concerning the on site data acquisition. The specific aim of the project, reported in this paper and realized by the Laboratory of Photogrammetry of the IUAV University of Venice, is to check different acquisition systems and their effectiveness test, considering each methodology individually or integrated. This research focuses on the awareness that the integration of different survey's methodologies can as a matter of fact increase the representative efficacy of the final representations; these are based on a wider and verified set of georeferenced metric data. Particularly the methods' integration allows reducing or neutralizing issues related to composite and complex objects' survey, since the most appropriate tools and techniques can be chosen considering the characteristics of each part of an archaeological site (i.e. urban structures, architectural monuments, small findings). This paper describes the experience in several sites of the municipality of Sepino (Molise, Italy), where the 3d digital acquisition of cities and structure of monuments, sometimes hard to reach, was realized using active and passive techniques (rage-based and image based methods). This acquisition was planned in order to obtain not only the basic support for interpretation analysis, but also to achieve models of the actual state of conservation of the site on which some reconstructive hypotheses can be based on. Laser scanning data were merged with Structure from Motion techniques' clouds into the same reference system, given by a topographical and GPS survey. These 3d models are not only the final results of the metric survey, but also the starting point for the whole reconstruction of the city and its urban context, from the research point of view. This reconstruction process will concern even some areas that have not yet been excavated, where the application of procedural modelling can offer an important support to the reconstructive hypothesis

Influence of Nd3+ doping on the structural and near-IR photoluminescence properties of nanostructured TiO2 films

n/

Influence of an innovative, biodegradable active packaging on the quality of sunflower oil and “pesto” sauce during storage

The aim of this research was to produce an innovative, biodegradable multilayer active packaging solution, with excellent oxygen barrier properties, to extend shelf- life of oily foods. In fact, one of the main drawbacks of biodegradable films is the low barrier they offer against external agents that can thus easily accelerate the foods degradation during shelf-life. In this study, a multilayer material obtained by the adhesion of two polylactic acid (PLA) films with cold plasma application, in place of synthetic adhesives, was realized. Moreover, cold plasma treatment was employed to immobilize the oxygen scavenger agent (ascorbic acid), chosen for the activation of the packaging material. Preliminary studies on activated PLA pouches filled with sunflower oil, used as model system, were performed. Model systems were stored at 35 ◦C to accelerate oil oxidation phenomenon and analysed for PV and colour during 64 days of storage. After that, different samples of “Genovese pesto”, were tested as real food, stored at 25 and 45 ◦C and analysed for PV, water activity, rheological parameters and microbiological loads during 41 days of storage. Obtained results showed the greater ability of the new active packaging to decrease the oxidation kinetics of “pesto”, mainly when stored at 25 ◦C. Moreover, all samples packed in the activated biodegradable pouches (both sunflower oils stored at 35 ◦C and pesto stored at 25 ◦C) showed better and more stable quality characteristics, in terms of colorimetric, microbiological and textural parameters when compared with the respective control samples. Overall obtained results highlighted the potentiality of the new biodegradable material, activated with the oxygen scavenger, to be applied successfully in food industry, to extend food products shelf-life and/or maintain high quality levels during storage

Analysis of transient seepage through a river embankment by means of centrifuge modelling

Earthen river embankments are typically in unsaturated conditions during their lifetime and the degree of saturation within their bodies may vary significantly throughout the year, due to seasonalfluctuations of the river stage, as well as infiltrations of meteoric precipitation and evapotranspiration phenomena. Given the significant effects of partial saturation on the hydro-mechanical behaviour of soils, realistic assumptions on the actual water content distribution inside the embankments are essential forproperly modelling their response to hydraulic loadings. In this framework, centrifuge modelling is a useful tool to get insights into the evolution of saturation conditions of a water retaining structure during flood events. It allows for the direct observation of the groundwater flow process, which is hardly detectable at the prototype scale, enabling, at the same time, the validation and calibration of predictive numerical tools.In this paper, the results of a centrifuge test carried out on small-scale physical model of a compacted silty clayey sand embankment subjected to a simulated high-water event, at the enhanced gravity of 50-g, are presented and discussed. The physical model was carefully instrumented with potentiometers, miniaturized pore pressure transducers and tensiometers. Pore pressures and suctions measured during the experiment showed that the stationary flow conditions were reached only after an unrealistic hydrometric peak persistence. It therefore emerges that, for the design and/or the assessment of the safety conditions of a river embankment similar to the one tested, the simplified hypothesis of a steady-state seepage, in equilibrium with the maximum river stage expected could result, in many cases, an excessively conservative assumption