35 research outputs found
Recommended from our members
Laser and electron deflection from transverse asymmetries in laser-plasma accelerators.
We report on the deflection of laser pulses and accelerated electrons in a laser-plasma accelerator (LPA) by the effects of laser pulse front tilt and transverse density gradients. Asymmetry in the plasma index of refraction leads to laser steering, which can be due to a density gradient or spatiotemporal coupling of the laser pulse. The transverse forces from the skewed plasma wave can also lead to electron deflection relative to the laser. Quantitative models are proposed for both the laser and electron steering, which are confirmed by particle-in-cell simulations. Experiments with the BELLA Petawatt Laser are presented which show controllable 0.1-1 mrad laser and electron beam deflection from laser pulse front tilt. This has potential applications for electron beam pointing control, which is of paramount importance for LPA applications
Plasma Equilibrium inside Various Cross-Section Capillary Discharges
Plasma properties inside a hydrogen-filled capillary discharge waveguide were
modeled with dissipative magnetohydrodynamic simulations to enable analysis of
capillaries of circular and square cross-sections implying that square
capillaries can be used to guide circularly-symmetric laser beams. When the
quasistationary stage of the discharge is reached, the plasma and temperature
in the vicinity of the capillary axis has almost the same profile for both the
circular and square capillaries. The effect of cross-section on the electron
beam focusing properties were studied using the simulation-derived magnetic
field map. Particle tracking simulations showed only slight effects on the
electron beam symmetry in the horizontal and diagonal directions for square
capillary.Comment: 6 pages, 10 figure
Recommended from our members
Development of high gradient laser wakefield accelerators towards nuclear detection applications at LBNL
Compact high-energy linacs are important to applications including monochromatic gamma sources for nuclear material security applications. Recent laser wakefield accelerator experiments at LBNL demonstrated narrow energy spread beams, now with energies of up to 1 GeV in 3 cm using a plasma channel at low density. This demonstrates the production of GeV beams from devices much smaller than conventional linacs, and confirms the anticipated scaling of laser driven accelerators to GeV energies. Stable performance at 0.5 GeV was demonstrated. Experiments and simulations are in progress to control injection of particles into the wake and hence to improve beam quality and stability. Using plasma density gradients to control injection, stable beams at 1 MeV over days of operation, and with an order of magnitude lower absolute momentum spread than previously observed, have been demonstrated. New experiments are post-accelerating the beams from controlled injection experiments to increase beam quality and stability. Thomson scattering from such beams is being developed to provide collimated multi-MeV monoenergetic gamma sources for security applications from compact devices. Such sources can reduce dose to target and increase accuracy for applications including photofission and nuclear resonance fluorescence
Defect engineering of silicon with ion pulses from laser acceleration
Defect engineering is foundational to classical electronic device development and for emerging quantum devices. Here, we report on defect engineering of silicon with ion pulses from a laser accelerator in the laser intensity range of 1019 W cm−2 and ion flux levels of up to 1022 ions cm−2 s−1, about five orders of magnitude higher than conventional ion implanters. Low energy ions from plasma expansion of the laser-foil target are implanted near the surface and then diffuse into silicon samples locally pre-heated by high energy ions from the same laser-ion pulse. Silicon crystals exfoliate in the areas of highest energy deposition. Color centers, predominantly W and G-centers, form directly in response to ion pulses without a subsequent annealing step. We find that the linewidth of G-centers increases with high ion flux faster than the linewidth of W-centers, consistent with density functional theory calculations of their electronic structure. Intense ion pulses from a laser-accelerator drive materials far from equilibrium and enable direct local defect engineering and high flux doping of semiconductors.This work was supported by the Office of Science, Office of Fusion Energy Sciences, of the U.S. Department of Energy, under Contract No. DE-AC02-05CH11231. Experiments at the BELLA Center were enabled through facilities developed by HEP and LaserNetUS. TS and JGL gratefully acknowledge support by the coordinated research project “F11020” of the International Atomic Energy Agency (IAEA). LZT and JS were supported by the Molecular Foundry, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. This research used resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231Peer reviewe
Supplementary Notes - Defect engineering of silicon with ion pulses from laser acceleration
14 pages. -- Supplementary Note 1. Time lapse movie showing evaporation of the aluminum foil mask during 100 shots. -- Supplementary Note 2. Photoluminescence (PL) and Secondary Ion Mass Spectrometry (SIMS) data correlation to PL data. -- Supplementary Note 3. Details on energy deposition and heat calculations. -- Supplementary Note 4. Details on Nuclear Reaction Analysis (NRA). -- Supplementary Note 5. Details on channeling Rutherford Backscattering (ch-RBS). -- Supplementary Note 6. Supplemental material on Density Functional Theory (DFT) calculations of G and W-centers in silicon.Peer reviewe
Investigation of a hydrogen-filled capillary discharge waveguide for laser-driven plasma accelerator
EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Recommended from our members
DEVELOPMENT OF WATER JET PLASMA MIRROR FOR STAGING OF LASER PLASMA ACCELERATORS
Staging Laser Plasma Accelerators (LPAs) is necessary in order to reach beam energies of 100 GeV and above. This requires incoupling of additional laser beams into accelerating stages. In order to maintain the high average accelerating gradient of a staged LPA, it is imperative to minimize the distance that is needed for laser incoupling. A plasma mirror is proposed as the final coupling optic reducing the coupling distance from tens of meters, using a conventional optic, to as small as a few cm. Both a planar water jet and a nitrocellulose foil are used as reflecting surfacesand characterized. A maximum reflectivity of 70percent was obtained using both surfaces
Recommended from our members
DEVELOPMENT OF WATER JET PLASMA MIRROR FOR STAGING OF LASER PLASMA ACCELERATORS
Staging Laser Plasma Accelerators (LPAs) is necessary in order to reach beam energies of 100 GeV and above. This requires incoupling of additional laser beams into accelerating stages. In order to maintain the high average accelerating gradient of a staged LPA, it is imperative to minimize the distance that is needed for laser incoupling. A plasma mirror is proposed as the final coupling optic reducing the coupling distance from tens of meters, using a conventional optic, to as small as a few cm. Both a planar water jet and a nitrocellulose foil are used as reflecting surfacesand characterized. A maximum reflectivity of 70percent was obtained using both surfaces
Recommended from our members
Demonstration of a Plasma Mirror Based on a Laminar Flow Water Film
A plasma mirror based on a laminar water film with low flow speed 0.5-2 cm/s has been developed and characterized, for use as an ultrahigh intensity optical reflector. The use of flowing water as atarget surface automatically results in each laser pulse seeing a new interaction surface and avoids the need for mechanical scanning of the target surface. In addition, the breakdown of water does notproduce contaminating debris that can be deleterious to vacuum chamber conditions and optics, such as is the case when using conventional solid targets. The mirror exhibits 70percent reflectivity, whilemaintaining high-quality of the reflected spot