2D Bipyrimidine silver(I) nitrate: Synthesis, X-ray structure, solution chemistry and anti-microbial activit

Synthesis and X-ray single crystal structure analysis of the compound {[Ag₂(μ₂-bpym)(μ-O-NO₃)₂]}_n, (1), (where bpym = 2,2′-bipyrimidine) are presented. Compound (1) has a (6,3)-2D honeycomb structure with a tetrahedral coordination geometry around the Ag(I) ion. In contrary to the solid state structural investigation, ESI-MS for (1) in solution shows a strong peak at m/z 423.0269 which indicates that the [Ag(bpym)₂]⁺ cation is dominating instead of [Ag₂(bpym)]²⁺. The anti-microbial activity of (1) was screened against 15 multi-drug resistant bacteria in comparison to silver(I) sulphadiazine and it showed a high activity against Burkholderia mallei which causes glanders; with a MIC value of 4 μg/ml

New Triazoloquinoxaline Ligand and its Polymeric 1D Silver(I) complex Synthesis, Structure, and Antimicrobial activity

The organic ligand 4-Benzyl-1-(N,N-dimethylamino)-[1,2,4]triazolo[4,3a]quinoxaline 1 (L) and its polymeric silver(I) complex, [Ag2L(NO3)2]n (2), have been synthesized and characterized. The organic ligand 1 crystallizes in the triclinic space group P¯1. The unit cell contains two parallel-stacked molecules. The complex [Ag2L(NO3)2]n (2) crystallizes in the monoclinic space group P21/n. The structure contains two different silver(I) ions. Ag(2) is coordinated by three oxygens (involving two nitrate groups) and to a nitrogen of the triazole ring of 1. These ligands form a strongly distorted tetrahedral, nearly planar coordination sphere. Ag(1) has an approximately tetrahedral geometry. It is bonded to one oxygen of a nitrate anion and a nitrogen of two different L; this aspect giving rise to an infinite chain structure. A final bond to Ag(1) involves the carbon of a phenyl group. It is more weakly bonded to the phenyl carbons on either side of this, so that the Ag(1)-phenyl bonding has aspects of an Ag-allyl bond. Ag(1) and Ag(2) participate in bonding to a common nitrate anion and alternate, the two distinct modes of bridging between them lead to a zig-zag chain structure. In addition to spectroscopic studies, the biological activities of the ligand and of the complex were scanned over a wide range of Gram positive and Gram negative flesh- and bone-eating bacteria. The results are discussed in comparison with well-known antibiotics

Shielding design and analyses of the cold neutron guide hall for the KIPT neutron source facility

Argonne National Laboratory of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have cooperated on the development, design, and construction of a neutron source facility. The facility was constructed at Kharkov, Ukraine, and its commissioning process is underway. The facility will be used for researches, producing medical isotopes, and training young nuclear specialists. The neutron source facility is designed with a provision to include a cryogenically cooled moderator system—a cold neutron source (CNS). This CNS provides low-energy neutrons, which will be used in the scattering experiment and material structures analysis. Cold neutron guides, coated with reflective material for the low-energy neutrons, will be used to transport the cold neutrons to the experimental site. The cold neutron guides would keep the cold neutrons within certain energy and angular space concentrated inside, while most of the gamma rays and high-energy neutrons are not affected by the cold neutron guides. For the KIPT design, the cold neutron guides need to extend several meters outside the main shield of the facility, and curved guides will also be used to remove the gamma and high-energy neutron. The neutron guides should be installed inside a shield structure to ensure an acceptable biological dose in the facility hall. Heavy concrete is the selected shielding material because of its acceptable performance and cost. Shield design analysis was carried out for the CNS guide hall. MCNPX was used as the major computation tool for the design analysis, with neutron and gamma dose calculated separately. Weight windows variance reduction technique was also used in the shield design. The goal of the shield design is to keep the total radiation dose below the 5.0 μSv/hr guideline outside the shield boundary. After a series of iterative MCNPX calculations, the shield configuration and parameters of CNS guide hall were determined and presented in this article. Keywords: Cold Neutron Source, MCNPX, Neutron Guides, Shield Desig

Electron Accelerator Shielding Design of KIPT Neutron Source Facility

The Argonne National Laboratory of the United States and the Kharkov Institute of Physics and Technology of the Ukraine have been collaborating on the design, development and construction of a neutron source facility at Kharkov Institute of Physics and Technology utilizing an electron-accelerator-driven subcritical assembly. The electron beam power is 100 kW using 100-MeV electrons. The facility was designed to perform basic and applied nuclear research, produce medical isotopes, and train nuclear specialists. The biological shield of the accelerator building was designed to reduce the biological dose to less than 5.0e-03 mSv/h during operation. The main source of the biological dose for the accelerator building is the photons and neutrons generated from different interactions of leaked electrons from the electron gun and the accelerator sections with the surrounding components and materials. The Monte Carlo N-particle extended code (MCNPX) was used for the shielding calculations because of its capability to perform electron-, photon-, and neutron-coupled transport simulations. The photon dose was tallied using the MCNPX calculation, starting with the leaked electrons. However, it is difficult to accurately tally the neutron dose directly from the leaked electrons. The neutron yield per electron from the interactions with the surrounding components is very small, ∼0.01 neutron for 100-MeV electron and even smaller for lower-energy electrons. This causes difficulties for the Monte Carlo analyses and consumes tremendous computation resources for tallying the neutron dose outside the shield boundary with an acceptable accuracy. To avoid these difficulties, the SOURCE and TALLYX user subroutines of MCNPX were utilized for this study. The generated neutrons were banked, together with all related parameters, for a subsequent MCNPX calculation to obtain the neutron dose. The weight windows variance reduction technique was also utilized for both neutron and photon dose calculations. Two shielding materials, heavy concrete and ordinary concrete, were considered for the shield design. The main goal is to maintain the total dose outside the shield boundary less than 5.0e-03 mSv/h during operation. The shield configuration and parameters of the accelerator building were determined and are presented in this paper

Induction of sporulation and antibacterial activity in the aerial mycelium negative mutants of Streptomyces nasri

Egyptian Journal of Biology Vol.3 2001: 23-3