Perfect periodic scheduling for binary tree routing in wireless networks

In this paper we tackle the problem of coordinating transmission of data across a Wireless Mesh Network. The single task nature of mesh nodes imposes simultaneous activation of adjacent nodes during transmission. This makes the coordinated scheduling of local mesh node traffic with forwarded traffic across the access network to the Internet via the Gateway notoriously difficult. Moreover, with packet data the nature of the coordinated transmission schedule has a big impact upon both the data throughput and energy consumption. Perfect Periodic Scheduling, in which each demand is itself serviced periodically, provides a robust solution. In this paper we explore the properties of Perfect Periodic Schedules with modulo arithmetic using the Chinese Remainder Theorem. We provide a polynomial time, optimisation algorithm, when the access network routing tree has a chain or binary tree structure. Results demonstrate that energy savings and high throughput can be achieved simultaneously. The methodology is generalisable

Noise measurements at Stockton Airport obtained during engineering evaluation of two-segment approaches in a 727-222 aircraft

The results of acoustic measurements made on a 727-222 aircraft during standard ILS and two-segment approaches are presented. The aircraft was equipped with a special purpose glide slope computer to provide the capability of making two-segment noise abatement approaches. For upper segment computations, the computer used barometric-corrected pressure altitude and the slant range to a DME transmitter which was colocated with the glide slope transmitter. The computer used the ILS glide slope deviation for lower segment computations. Additional measurements were made on 737 revenue aircraft using the Stockton Airport. The purpose of the acoustical portion of the test was to measure and identify the noise levels during the various approaches

Perfect periodic scheduling for three basic cycles

Periodic scheduling has many attractions for wireless telecommunications. It offers energy saving where equipment can be turned off between transmissions, and high-quality reception through the elimination of jitter, caused by irregularity of reception. However, perfect periodic schedules, in which each (of n) client is serviced at regular, pre-specified intervals, are notoriously difficult to construct. The problem is known to be NP-hard even when service times are identical. This paper focuses on cases of up to three distinct periodicities, with unit service times. Our contribution is to derive a O(n4) test for the existence of a feasible schedule, and a method of constructing a feasible schedule if one exists, for the given combination of client periodicities. We also indicate why schedules with a higher number of periodicities are unlikely to be useful in practice. This methodology can be used to support perfect periodic scheduling in a wide range in real world settings, including machine maintenance service, wireless mesh networks and various other telecommunication networks transmitting packet size data

Procedure for implementation of temperature-dependent mechanical property capability in the Engineering Analysis Language (EAL) system

A procedure is presented to allow the use of temperature dependent mechanical properties in the Engineering Analysis Language (EAL) System for solid structural elements. This is accomplished by including a modular runstream in the main EAL runstream. The procedure is applicable for models with multiple materials and with anisotropic properties, and can easily be incorporated into an existing EAL runstream. The procedure (which is applicable for EAL elastic solid elements) is described in detail, followed by a description of the validation of the routine. A listing of the EAL runstream used to validate the procedure is included in the Appendix

Aerothermal tests of spherical dome protuberances on a flat plate at a Mach number of 6.5

Aerothermal tests were conducted in the Langley 8-Foot High-Temperature Tunnel at a Mach number of 6.5 on a series of spherical dome protuberances mounted on a flat-plate test apparatus. Detailed surface pressure and heating-rate distributions were obtained for various dome heights and diameters submerged in both laminar and turbulent boundary layers including a baseline geometric condition representing a thermally bowed metallic thermal protection system (TPS) tile. The present results indicated that the surface pressures on the domes were increased on the windward surface and reduced on the leeward surface as predicted by linearized small-perturbation theory, and the distributions were only moderately affected by boundary-layer variations. Surface heating rates for turbulent flow increased on the windward surface and decreased on the leeward surface similar to the pressure; but for laminar boundary layers, the heating rates remained high on the leeward surface, probably due to local transition. Transitional flow effects cause heat load augmentation to increase by 30 percent for the maximum dome height in a laminar boundary layer. However, the corresponding augmentation for a dome with a height of 0.1 in. and a diameter of 14 in. representative of a bowed TPS tile was 14 percent or less for either a laminar or turbulent boundary layer

Noise measurements taken at LAX during operational evaluation of two-segment approaches in a 727-200 aircraft

A series of seven noise measurements were made each day over a period of fifteen days. The first and last flights each day were made by a specially instrumented 727-200 aircraft being used to evaluate the operational effectiveness of two-segment noise abatement approaches in scheduled service. Noise measurements were made to determine the noise reduction benefits of the two-segment approaches

Inhibition of monocyte complement receptor enhancement by low molecular weight material from human lung cancers

We have studied the effect of dialysates from lung cancer homogenates to alter both the expression of complement (C3b) receptors per se and also to inhibit leucoattractant-induced enhancement of complement rosettes on monocytes from healthy individuals. Enhancement and enhancement-inhibition by tumour extracts were compared with material derived from normal lung excised from distance from the tumour. There was no significant difference between tumour homogenate (TH) and normal lung homogenate (NLH) in terms of enhancement of complement rosettes per se. In contrast, TH produced a dose- and time-dependent inhibition of leucoattractant-induced enhancement of C3b rosettes which was significantly different from that obtained with NLH. This enhancement-inhibition was observed with four undifferentiated, four squamous and three adenocarcinomas of lung. The degree of enhancement-inhibition was not related to the type of tumour or varying accompanying histological features such as necrosis and the degree of infiltration with inflammatory cells. Following gel filtration on Sephadex G-50 each type of cancer gave a major peak of inhibitory activity which eluted with molecules having an apparent molecular size of approximately 3,000 daltons. A second larger peak (8,000-10,000 daltons) was also detected with extracts from the undifferentiated and adenocarcinomas. These results support previous findings, mainly from experimental animals, indicating that 'anti-macrophage/monocyte principles' are elaborated from certain tumour types

Continuous monitoring of the lunar or Martian subsurface using on-board pattern recognition and neural processing of Rover geophysical data

The ultimate goal is to create an extraterrestrial unmanned system for subsurface mapping and exploration. Neural networks are to be used to recognize anomalies in the profiles that correspond to potentially exploitable subsurface features. The ground penetrating radar (GPR) techniques are likewise identical. Hence, the preliminary research focus on GPR systems will be directly applicable to seismic systems once such systems can be designed for continuous operation. The original GPR profile may be very complex due to electrical behavior of the background, targets, and antennas, much as the seismic record is made complex by multiple reflections, ghosting, and ringing. Because the format of the GPR data is similar to the format of seismic data, seismic processing software may be applied to GPR data to help enhance the data. A neural network may then be trained to more accurately identify anomalies from the processed record than from the original record

Multiscale Particle-Continuum Simulations of Hypersonic Flow over a Planetary Probe

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76410/1/AIAA-37319-396.pd

Investigation of single crystal ferrite thin films

Materials suitable for use in magnetic bubble domain memories were developed for aerospace applications. Practical techniques for the preparation of such materials in forms required for fabrication of computer memory devices were considered. The materials studied were epitaxial films of various compositions of the gallium-substituted yttrium gadolinium iron garnet system. The major emphasis was to determine their bubble properties and the conditions necessary for growing uncracked, high quality films