2,377 research outputs found
Analysis of System-Failure Rate Caused by Soft-Errors using a UML-Based Systematic Methodology in an SoC
This paper proposes an analytical method to assess the soft-error rate (SER) in the early stages of a System-on-Chip (SoC) platform-based design methodology. The proposed method gets an executable UML (Unified Modeling Language) model of the SoC and the raw soft- error rate of different parts of the platform as its inputs. Soft-errors on the design are modeled by disturbances on the value of attributes in the classes of the UML model and disturbances on opcodes of software cores. The Dynamic behavior of each core is used to determine the propagation probability of each variable disturbance to the core outputs. Furthermore, the SER and the execution time of each core in the SoC and a Failure Modes and Effects Analysis (FMEA) that determines the severity of each failure mode in the SoC are used to compute the System-Failure Rate (SFR) of the So
On the Performance Limits of Map-Aware Localization
Establishing bounds on the accuracy achievable by localization techniques represents a fundamental technical issue. Bounds on localization accuracy have been derived for cases in which the position of an agent is estimated on the basis of a set of observations and, possibly, of some a priori information related to them (e.g., information about anchor positions and properties of the communication channel). In this paper, new bounds are derived under the assumption that the localization system is map-aware, i.e., it can benefit not only from the availability of observations, but also from the a priori knowledge provided by the map of the environment where it operates. Our results show that: a) map-aware estimation accuracy can be related to some features of the map (e.g., its shape and area) even though, in general, the relation is complicated; b) maps are really useful in the presence of some combination of low SNRs and specific geometrical features of the map (e.g., the size of obstructions); c) in most cases, there is no need of refined maps since additional details do not improve estimation accuracy.United States. Air Force Office of Scientific Research (Grant FA9550-12-0287)United States. Office of Naval Research (Grant N00014-11-1-0397)Massachusetts Institute of Technology. Institute for Soldier Nanotechnologie
Human-Centric Computational Urban Design:Optimizing High-Density Urban Areas to Enhance Human Well-being
Urban areas face increasing pressure due to densification, presenting numerous challenges involving various stakeholders. The impact of densification on human well-being in existing urban areas can be both positive and negative, which requires a comprehensive understanding of its consequences. Computational Urban Design (CUD) emerges as a valuable tool in this context, offering rapid generation and evaluation of design solutions, although it currently lacks consideration for human perception in urban areas. This research addresses the challenge of incorporating human perception into computational urban design in the context of urban densification, and therefore demonstrates a complete process. Using Place Pulse 2.0 data and multinomial logit models, the study first quantifies the relationship between volumetric built elements and human perception (beauty, liveliness, and safety). The findings are then integrated into a Grasshopper-based CUD tool, enabling the optimization of parametric designs based on human perception criteria. The results show the potential of this approach. Finally, future research and development ideas are suggested based on the experiences and insights derived from this study
Cross-Component Energy Transfer in Superfluid Helium-4
The reciprocal energy and enstrophy transfers between normal fluid and
superfluid components dictate the overall dynamics of superfluid He
including the generation, evolution and coupling of coherent structures, the
distribution of energy among lengthscales, and the decay of turbulence. To
better understand the essential ingredients of this interaction, we employ a
numerical two-way model which self-consistently accounts for the back-reaction
of the superfluid vortex lines onto the normal fluid. Here we focus on a
prototypical laminar (non-turbulent) vortex configuration which is simple
enough to clearly relate the geometry of the vortex line to energy injection
and dissipation to/from the normal fluid: a Kelvin wave excitation on two
vortex anti-vortex pairs evolving in (a) an initially quiescent normal fluid,
and (b) an imposed counterflow. In (a), the superfluid injects energy and
vorticity in the normal fluid. In (b), the superfluid gains energy from the
normal fluid via the Donnelly-Glaberson instability
Characterization of power transistors as high dose dosimeters
A bipolar transistor, previously investigated as a possible radiation dosimeter and tested under industrial irradiation conditions in high-activity gamma and high-energy, high-power electron beam facilities has been subjected to stability test in order to understand its behaviour and help to improve its performances. Charge carrier lifetime was measured for several sets of transistors which were then irradiated with various doses (3-60 kGy): seven sets with Co-60 gamma rays and eight with a 10MeV electron beam. After irradiation all the transistors were measured and each set was divided into three groups: one group was left untreated, the second group was heated at 100 degrees C for 30 minutes and the third group was heated at 150 degrees C for 30 minutes, for testing the stability of the lifetime. Our data showed that heat treatment quite successfully eliminates post-irradiation changes in the response. Response measurements of the irradiated transistors, heat-treated and untreated, were carried out at room temperature over several weeks after irradiation to establish post-irradiation stability and assess if these transistors could be used for recording dose history. Calibration curves in the range 3-60 kGy for the thermally treated and untreated devices are presented. Dependence of the response of the transistors on the temperature of the measurements in the range 20-50 degrees C is reported
Design of Multilayer Dielectric Cover to Enhance Gain and Efficiency of Slot Arrays
An effective design procedure, based on the Elliot’s synthesis method, is proposed to investigate the properties of waveguide slot arrays with multilayer dielectric cover. Then, the features of the designed arrays are analyzed by means of a FEM commercial software, namely Ansys HFSS 13. We show how a
proper choice of the dielectric cover configuration allows to increase the array gain and aperture efficiency, while taking advantage of the properties of the radome structure, both in terms of insulation, protection and pressurization of the radiating waveguides. Therefore, a significant outcome of the optimal choice
of the multilayer dielectric cover is the reduction of the number of slots with respect to an array radiating into free space with the same gain and efficiency, with a consequent reduction of the production cost
Delayed - Choice Entanglement - Swapping with Vacuum-One Photon Quantum States
We report the experimental realization of a recently discovered quantum
information protocol by Asher Peres implying an apparent non-local quantum
mechanical retrodiction effect. The demonstration is carried out by applying a
novel quantum optical method by which each singlet entangled state is
physically implemented by a two-dimensional subspace of Fock states of a mode
of the electromagnetic field, specifically the space spanned by the vacuum and
the one photon state, along lines suggested recently by E. Knill et al., Nature
409, 46 (2001) and by M. Duan et al., Nature 414, 413 (2001). The successful
implementation of the new technique is expected to play an important role in
modern quantum information and communication and in EPR quantum non-locality
studies
Nanoscale effects on the ionic conductivity of highly doped bulk nanometric cerium oxide
Nanometric ceria powders doped with 30 mol % samaria are consolidated by a high-pressure spark plasma sintering (HP-SPS) method to form > 99 % dense samples with a crystallite size as small as 16.5 nm. A conductivity dependence on grain size was noted: when the grain size was less than 20 nm, only one semicircle in the AC impedance spectra was observed and was attributed to bulk conductivity. In contrast to previous observations on pure ceria, the disappearance of the grain-boundary blocking effect is not associated with mixed conductivity. With annealing and concomitant grain growth, the samples show the presence of a grain-boundary effect
- …