Synthesis of lithium ferrites from polymetallic carboxylates

Lithium ferrite was prepared by the thermal decomposition of three polynuclear complex compounds containing as ligands the anions of malic, tartaric and gluconic acid: (NH4)2[Fe2.5Li0.5(C4H4O5)3(OH)4(H2O)2]×4H2O (I), (NH4)6[Fe2.5Li0.5(C4H4O6)3(OH)8]×2H2O (II) and (NH4)2[Fe2.5Li0.5(C6H11O7)3(OH)7] (III). The polynuclear complex precursors were characterized by chemical analysis, IR and UV–Vis spectra, magnetic measurements and thermal analysis. The obtained lithium ferrites were characterized by XRD, scanning electron microscopy, IR spectra and magnetic measurements. The single α-Li0.5Fe2.5O4 phase was obtained by thermal decomposition of the tartarate complex annealed at 700 °C for 1 h. The magnetization value ≈ 50 emu g-1 is lower than that obtained for the bulk lithium ferrite due to the nanostructural character of the ferrite. The particle size was smaller than 100 nm

Chromium Substituted Cobalt Ferrites by Glycine-Nitrates Process

Chromium substituted cobalt ferrites (CoFe2–xCrxO4, 0 ≤ x ≤ 2) were synthesized through solution combustion method using glycine as fuel, named glycine-nitrates process (GNP). As evidenced by X-ray diffraction data (XRD), single cubic spinel phase was formed for all CoFe2–xCrxO4 (0 ≤ x ≤ 2) series. The cubic lattice parameter (a) decreases with increasing chromium content. Room temperature 57Fe Mössbauer spectra revealed the Fe3+ and Cr3+ site occupancy, the local hyperfine magnetic fields and the substitution of Fe3+ by Cr3+ in the lattice. Scanning electron microscopy (SEM) showed a refinement of particle size with the increase of Cr3+ content. Magnetic measurements from 5 K to 120 K have shown a dropping in the saturation magnetization as the chromium content increases. This behaviour has been explained in terms of substitution of Fe3+ by Cr3+ in the cubic lattice of cobalt ferrite

JSCS–3779 Original scientific paper Synthesis of lithium ferrites from polymetallic carboxylates

Abstract: Lithium ferrite was prepared by the thermal decomposition of three polynuclear complex compounds containing as ligands the anions of malic, tartaric and gluconic acid: (NH4) 2[Fe2.5Li0.5(C4H4O5) 3(OH) 4(H2O) 2]�4H2O (I), (NH4) 6[Fe2.5Li0.5(C4H4O6) 3(OH) 8]�2H2O (II) and (NH4) 2[Fe2.5Li0.5(C6H11O7) 3(OH) 7] (III). The polynuclear complex precursors were characterized by chemical analysis, IR and UV–Vis spectra, magnetic measurements and thermal analysis. The obtained lithium ferrites were characterized by XRD, scanning electron microscopy, IR spectra and magnetic measurements. The single �-Li0.5Fe2.5O4 phase was obtained by thermal decomposition of the tartarate complex annealed at 700 °C for 1 h. The magnetization value ≈ 50 emu g-1 is lower than that obtained for the bulk lithium ferrite due to the nanostructural character of the ferrite. The particle size was smaller than 100 nm

Structural, Morphological, and Optical Properties of Single and Mixed Ni-Co Aluminates Nanoparticles

A series including single and mixed Ni-Co aluminates was obtained using the precursor method, with malic acid as a ligand. The malate precursors (polynuclear coordination compounds) were isolated and characterized by Fourier Transform Infrared (FTIR), Ultraviolet/Visible/Near Infrared (UV–Vis–NIR) spectroscopy, and thermal analysis. The UV–Vis–NIR spectra of the synthesized complex compounds highlighted the presence of Co2+ and Ni2+ in an octahedral environment. The thermal decomposition of these precursors led to Co1−xNixAl2O4 (x = 0, 0.1, 0.25, 0.5, 0.75, 0.9, and 1) spinels. The effect of Ni2+ substitution on the structure, morphology, and optical properties of the obtained oxides was studied with the help of different characterization tools. XRD, FTIR, and Raman spectra evidenced the formation of the spinel phase. The size of the crystallites and the agglomeration degree of the particles decrease when the nickel content increases. The band gap (BG) value is not significantly influenced by the Ni substitution. The fluorescence spectra recorded for all samples show a similar pattern, but different intensities of the emission bands

Soft Chemistry Synthesis and Characterization of CoFe1.8RE0.2O4 (RE3+ = Tb3+, Er3+) Ferrite

Nanosized CoFe1.8RE0.2O4 (RE3+ = Tb3+, Er3+) ferrites were obtained through wet ferritization method. These ferrites were characterized by X-ray diffraction (XRD), scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM/HR-TEM), Fourier transform infrared spectroscopy (FTIR), Mössbauer spectroscopy and magnetic measurements. The XRD results revealed that the average crystallite size is 5.77 nm for CoFe1.8Tb0.2O4 and 6.42 nm for CoFe1.8Er0.2O4. Distribution of metal cations in the spinel structure estimated from X-ray diffraction data showed that the Tb3+ and Er3+ ions occupy the octahedral sites. TEM images indicated the presence of polyhedral particles with average size 5.91 nm for CoFe1.8Tb0.2O4 and 6.80 nm for CoFe1.8Er0.2O4. Room temperature Mössbauer spectra exhibit typical nanoscaled cobalt ferrite spectra in good agreement with XRD and TEM data. The saturation magnetization value (Ms) is 60 emu/g for CoFe1.8Tb0.2O4 and 80 emu/g for CoFe1.8Er0.2O4. CoFe1.8RE0.2O4 nanoparticles showed similar antimicrobial efficacy against the five tested microbial strains, both in planktonic and biofilm state. The results highlight the promising potential of these types of nanoparticles for the development of novel anti-biofilm agents and materials