Ancient volcanic xenon in single glass grains from the D'Orbigny angrite

We present high-sensitivity xenon data for single glass grains from the D'Orbigny angrite. These grains contain the first sample of volcanic gas from a planetary body other than the Earth and excess Xe-129 detected for the first time in angrites

Development of high T(sub c) (greater than 110 K) Bi, Tl, and Y-based materials as superconducting circuit elements

Experimental work has continued on the development and characterization of bulk and hot pressed powders and tapecast materials in the Bi-Sr-Ca-Cu-O and Tl-Ba-Ca-Cu-O systems. A process for producing warp-free, sintered, superconducting tapes of Bi composition Bi2Sr2Ca2Cu3O(x) with a mixed oxide process was established. This procedure required a triple calcination at 830 C for 24 hours and sintering at 845 C from 20 to 200 hours. Hot pressing the triple calcined powder at 845 C for 6 hours at 5000 psi yielded a dense material which on further heat treatment at 845 C for 24 hours exhibited a Tc of 108.2 K. A further improvement in the processing of the bismuth materials was achieved via a chemical coprecipitation process wherein the starting nitrate materials were coprecipitated with oxalic acid, thus yielding a more chemically homogeneous, more reactive powder. With the coprecipitated powders, only one calcine at 830 C for 12 hours and a final sinter at 845 C for 30 hours was sufficient to produce a bulk superconducting material with a Tc of 108.4 K. SAFIRE-type grounding links were successfully fabricated from sintered, tapecast, coprecipitated BSCCO 2223 powders. Compositional and processing investigations were continued on the Tl-based superconductors. Manganese and lithium additions and sintering temperature and time were examined to determine their influence on superconducting properties. It was found that lithium substitutions for copper enhance the transition temperatures while manganese additions produced deleterious effects on the superconducting properties. A suitable procedure for producing reproducible bulk and tapecast material of Tl composition Tl2Ba2Ca2Cu3O(x) was developed and used in fabricating uniform superconducting tapes. The highest transition temperature for Tl-based tapes was measured at 110.2 K. Thallium superconducting SAFIRE-type grounding links were fabricated from the tapes

Developing and validating a predictive model for stroke progression

<p><b>Background:</b> Progression is believed to be a common and important complication in acute stroke, and has been associated with increased mortality and morbidity. Reliable identification of predictors of early neurological deterioration could potentially benefit routine clinical care. The aim of this study was to identify predictors of early stroke progression using two independent patient cohorts.</p> <p><b>Methods:</b> Two patient cohorts were used for this study – the first cohort formed the training data set, which included consecutive patients admitted to an urban teaching hospital between 2000 and 2002, and the second cohort formed the test data set, which included patients admitted to the same hospital between 2003 and 2004. A standard definition of stroke progression was used. The first cohort (n = 863) was used to develop the model. Variables that were statistically significant (p < 0.1) on univariate analysis were included in the multivariate model. Logistic regression was the technique employed using backward stepwise regression to drop the least significant variables (p > 0.1) in turn. The second cohort (n = 216) was used to test the performance of the model. The performance of the predictive model was assessed in terms of both calibration and discrimination. Multiple imputation methods were used for dealing with the missing values.</p> <p><b>Results:</b> Variables shown to be significant predictors of stroke progression were conscious level, history of coronary heart disease, presence of hyperosmolarity, CT lesion, living alone on admission, Oxfordshire Community Stroke Project classification, presence of pyrexia and smoking status. The model appears to have reasonable discriminative properties [the median receiver-operating characteristic curve value was 0.72 (range 0.72–0.73)] and to fit well with the observed data, which is indicated by the high goodness-of-fit p value [the median p value from the Hosmer-Lemeshow test was 0.90 (range 0.50–0.92)].</p> <p><b>Conclusion:</b> The predictive model developed in this study contains variables that can be easily collected in practice therefore increasing its usability in clinical practice. Using this analysis approach, the discrimination and calibration of the predictive model appear sufficiently high to provide accurate predictions. This study also offers some discussion around the validation of predictive models for wider use in clinical practice.</p&gt

Development of high Tc (greater than 110K) Bi, Tl and Y-based materials as superconducting circuit elements

This report is presented in two parts. Part 1 deals primarily with Bi-based materials and a small amount of work on a Y-based composition while Part 2 covers work on Tl-based materials. In Part 1, a reliable and reproducible process for producing bulk bismuth-based superconductors has been developed. It is noted however, that a percentage of the tapecast material experiences curling and fracturing after a 30 hour sintering period and is thus in need of further examination. The Bi-Sr-Ca-Cu-O (BSCCO) material has been characterized by critical temperature data, X-ray diffraction data, and surface morphology. In the case of T sub c, it is not critical to anneal the material. It appears that the BSCCO material has the possibility of producing a better grounding strap than that of the 123 material. Attempts to reproduce near room temperature superconductors in the Y-Ba-Cu-O system were unsuccessful. In Part 2, several methods of processing the high temperature superconductor Tl2Ba2Ca2Cu3O10 were investigated; i.e., different precursor compositions were sintered at various sintering times and temperatures. The highest superconductig temperature was found to be 117.8K when fired at 900 C for three hours. Higher sintering temperatures produced a melted sample which was nonsuperconducting at liquid nitrogen temperature. Also, a preliminary study found Li2O substitutions for copper appeared to increase the transition temperature and create fluxing action upon sintering. It was suggested that lower sintering temperatures might be obtained with lithium additions to produce reliable Tl2Ba2Ca2Cu3O10 processing methods

I-Xe analysis of a magnetic separate from Lodranite GRA95209

I-Xe dating of a magnetic mineral separate from lodranite GRA95209 suggests that peak temperatures (and therefore melt migration) occurred early, at least a few million years before closure of the I-Xe system in phosphates from Acapulco

The Behavior of Soluble Salt in Sharkey Clay

Soluble salt problems do exist and are significant in Arkansas. Studies have been conducted on Crowley silt loam (Typic Albaqualfs) which have established the behavior of soluble salt in that soil. The major objective of this study was to quantify the behavior of soluble salt in a second important Mississippi River Delta soil - the Sharkey (Vertic Haplaquepts). To this end, estimation of the downward redistribution of salt and the estimation of various components of the water balance for this soil served as specific objectives. Field studies were designed to monitor the movement of salt in the Sharkey soil and to characterize selected components of the water balance. In total, three tentative conclusions may be drawn from the data. First, the infiltration for the Sharkey soil was approximately three times that of the Crowley silt loam. The average value was 29 cm for the rice season. Second, levee seepage, while significant for small plots, was shown to be small for production-sized fields. Levee seepage remained relatively constant throughout the season and averaged 0.025 nvfym/d. And third, downward redistribution of salt was large and appeared to follow a pattern where a peak occurred at the surface and, possibly, at the lower soil depths

Identification of Trace Organic Components in the CR Chondrites by 4D TOFMS

This paper reports preliminary results of a 4D TOFMS study of CR chondrite organic material, highlighting the low-level organic species that may further reveal the complexity of parent body modification of interstellar precursors

Production of high molecular weight organic compounds on the surfaces of amorphous iron silicate catalysts: Implications for organic synthesis in the solar nebula

The high molecular weight organic products of Fischer-Tropsch/Haber-Bosch syntheses on the surfaces of Fe-silicate catalysts have been studied by GCMS