Porous microspheres support mesenchymal progenitor cell ingrowth and stimulate angiogenesis

Porous microspheres have the potential for use as injectable bone fillers to obviate the need for open surgery. Successful bone fillers must be able to support vascularisation since tissue engineering scaffolds often cease functioning soon after implantation due to a failure to vascularise rapidly. Here, we test the angiogenic potential of a tissue engineered bone filler based on a photocurable acrylate-based high internal phase emulsion (HIPE). Highly porous microspheres were fabricated via two processes, which were compared. One was taken forward and investigated for its ability to support human mesenchymal progenitor cells and angiogenesis in a chorioallantoic membrane (CAM) assay. Porous microspheres with either a narrow or broad size distribution were prepared via a T-junction microfluidic device or by a controlled stirred-tank reactor of the HIPE water in oil in water (w/o/w), respectively. Culture of human embryonic stem cell-derived mesenchymal progenitor (hES-MP) cells showed proliferation over 11 days and formation of cell-microsphere aggregates. In-vitro, hES-MP cells were found to migrate into microspheres through their surface pores over time. The presence of osteoblasts, differentiated from the hES-MP cells, was evidenced through the presence of collagen and calcium after 30 days. Microspheres pre-cultured with cells were implanted into CAM for 7 days and compared with control microspheres without pre-cultured cells. The hES-MP seeded microspheres supported greater angiogenesis, as measured by the number of blood vessels and bifurcations, while the empty scaffolds attracted host chick cell ingrowth. This investigation shows that controlled fabrication of porous microspheres has the potential to create an angiogenic, bone filling material for use as a cell delivery vehicle

Biomaterials for Pelvic Floor Reconstructive Surgery: How Can We Do Better?

Stress urinary incontinence (SUI) and pelvic organ prolapse (POP) are major health issues that detrimentally impact the quality of life of millions of women worldwide. Surgical repair is an effective and durable treatment for both conditions. Over the past two decades there has been a trend to enforce or reinforce repairs with synthetic and biological materials. The determinants of surgical outcome are many, encompassing the physical and mechanical properties of the material used, and individual immune responses, as well surgical and constitutional factors. Of the current biomaterials in use none represents an ideal. Biomaterials that induce limited inflammatory response followed by constructive remodelling appear to have more long term success than biomaterials that induce chronic inflammation, fibrosis and encapsulation. In this review we draw upon published animal and human studies to characterize the changes biomaterials undergo after implantation and the typical host responses, placing these in the context of clinical outcomes

Exploration of 2-deoxy-D-ribose and 17β-Estradiol as alternatives to exogenous VEGF to promote angiogenesis in tissue-engineered constructs

Aim: In this study, we explored the angiogenic potential and proangiogenic concentration ranges of 2-deoxy-D-ribose (2dDR) and 17β-Estradiol (E2) in comparison with VEGF. The 2dDR and E2 were then loaded into tissue engineering (TE) scaffolds to investigate their proangiogenic potential when released from fibers. Materials & methods:Ex ovo chick chorioallantoic membrane (CAM) assay was used to evaluate angiogenic activity of 2dDR and E2. Both factors were then introduced into scaffolds via electrospinning to assess their angiogenic potential when released from fibers. Results: Both factors were approximately 80% as potent as VEGF and showed a dose-dependent angiogenic response. The sustained release of both agents from the scaffolds stimulated neovascularization over 7 days in the chorioallantoic membrane assay. Conclusion: We conclude that both 2dDR and E2 provide attractive alternatives to VEGF for the functionalization of tissue engineering scaffolds to promote angiogenesis in vivo

The stability of money demand in the long-run: Italy 1861–2011

Money demand stability is a crucial issue for monetary policy efficacy, and it is particularly endangered when substantial changes occur in the monetary system. By implementing the ARDL technique, this study intends to estimate the impact of money demand determinants in Italy over a long period (1861–2011) and to investigate the stability of the estimated relations. We show that instability cannot be excluded when a standard money demand function is estimated, irrespectively of the use of M1 or M2. Then, we argue that the reason for possible instability resides in the omission of relevant variables, as we show that a fully stable demand for narrow money (M1) can be obtained from an augmented money demand function involving real exchange rate and its volatility as additional explanatory variables. These results also allow us to argue that narrower monetary aggregates should be employed in order to obtain a stable estimated relation

Developing repair materials for stress urinary incontinence to withstand dynamic distension

Polypropylene mesh used as a mid-urethral sling is associated with severe clinical complications in a significant minority of patients. Current in vitro mechanical testing shows that polypropylene responds inadequately to mechanical distension and is also poor at supporting cell proliferation.Our objective therefore is to produce materials with more appropriate mechanical properties for use as a sling material but which can also support cell integration.Scaffolds of two polyurethanes (PU), poly-L-lactic acid (PLA) and co-polymers of the two were produced by electrospinning. Mechanical properties of materials were assessed and compared to polypropylene. The interaction of adipose derived stem cells (ADSC) with the scaffolds was also assessed. Uniaxial tensiometry of scaffolds was performed before and after seven days of cyclical distension. Cell penetration (using DAPI and a fluorescent red cell tracker dye), viability (AlamarBlue assay) and total collagen production (Sirius red assay) were measured for ADSC cultured on scaffolds.Polypropylene was stronger than polyurethanes and PLA. However, polypropylene mesh deformed plastically after 7 days of sustained cyclical distention, while polyurethanes maintained their elasticity. Scaffolds of PU containing PLA were weaker and stiffer than PU or polypropylene but were significantly better than PU scaffolds alone at supporting ADSC.Therefore, prolonged mechanical distension in vitro causes polypropylene to fail. Materials with more appropriate mechanical properties for use as sling materials can be produced using PU. Combining PLA with PU greatly improves interaction of cells with this material

Simple surface coating of electrospun poly-L-lactic acid scaffolds to induce angiogenesis.

Tissue-engineered constructs often fail due to poor integration with the patient's tissues. Specifically, they fail to be neovascularised, leading to the death and loss of the implanted tissues. Thus, there is a need to produce angiogenic materials to improve tissue integration. We describe the development of a layer-by-layer approach to coat electrospun scaffolds to help promote angiogenesis into these biomaterials once implanted. Electrospun poly-L-lactic acid was coated comparing two different techniques - one using alternative layers of polyethyleneImine (PEI) and polyacrylic Acid (PAC) and one with alternative layers of PEI and heparin for a total of seven layers in both cases. Both scaffolds were then coated with heparin as the final layer. The scaffold coated with alternate PEI and PAC showed a clear ability to bind the most heparin. This scaffold was then studied further for its ability to bind vascular endothelial growth factor, which was confirmed using an ELISA. The scaffold coated with seven alternate layers of PEI and PAC and heparin was then implanted in a chick chorionic allantoic membrane (CAM) assay. After a period of 7 days in the CAM, the coated scaffold showed strong angiogenic activity. In contrast, the uncoated scaffolds did not promote angiogenesis. We conclude that this approach to functionalising scaffolds is effective within a clinically relevant time period (7 days in an in-vivo angiogenic model) and suggest this will be useful for improving integration of scaffolds once implanted