27,052 research outputs found
Expanding the toolbox for nanoparticle trapping and spectroscopy with holographic optical tweezers
We have developed a workstation based on holographic tweezers to optically trap, move and characterize metal nanoparticles. Our advanced darkfield imaging system allows us to simultaneously image and take spectra of single trapped metal nanoparticles. We take advantage of the beamshaping abilities of the spatial light modulator and correct for aberrations of the trapping optics. We monitor the improvement of the optical trap with video-based nanoparticle tracking. Furthermore we theoretically assess the capabilities and limitations of video-based tracking for nanoparticle position detection, in particular with respect to acquisition frequencies below the corner frequency
Science requirements for a global change technology architecture trade study
Science requirements for a global change technology initiative (GCTI) Architecture Trade Study were established by reviewing and synthesizing results from recent studies. A scientific rationale was adopted and used to identify a comprehensive set of measureables and their priorities. Spatial and temporal requirements for a number of measurement parameters were evaluated based on results from several working group studies. Science requirements were defined using these study results in conjunction with the guidelines for investigating global changes over a time scale of decades to centuries. Requirements are given separately for global studies and regional process studies. For global studies, temporal requirements are for sampling every 1 to 12 hours for atmospheric and radiation parameters and 1 day or more for most earth surface measurements. Therefore, the atmospheric measureables provide the most critical drivers for temporal sampling. Spatial sampling requirements vary from 1 km for land and ocean surface characteristics to 50 km for some atmospheric parameters. Thus, the land and ocean surface parameters have the more significant spatial variations and provide the most challenging spatial sampling requirements
Holographic tracking and sizing of optically trapped microprobes in diamond anvil cells
We demonstrate that Digital Holographic Microscopy can be used for accurate 3D tracking and sizing of a colloidal probe trapped in a diamond anvil cell (DAC). Polystyrene beads were optically trapped in water up to Gigapascal pressures while simultaneously recording in-line holograms at 1 KHz frame rate. Using Lorenz-Mie scattering theory to fit interference patterns, we detected a 10% shrinking in the bead’s radius due to the high applied pressure. Accurate bead sizing is crucial for obtaining reliable viscosity measurements and provides a convenient optical tool for the determination of the bulk modulus of probe material. Our technique may provide a new method for pressure measurements inside a DAC
On Dwarf Galaxies as the Source of Intracluster Gas
Recent observational evidence for steep dwarf galaxy luminosity functions in
several rich clusters has led to speculation that their precursors may be the
source of the majority of gas and metals inferred from intracluster medium
(ICM) x-ray observations. Their deposition into the ICM is presumed to occur
through early supernovae-driven winds, the resultant systems reflecting the
photometric and chemical properties of the low luminosity dwarf spheroidals and
ellipticals we observe locally. We consider this scenario, utilising a
self-consistent model for spheroidal photo-chemical evolution and gas ejection
via galactic superwinds. Insisting that post-wind dwarfs obey the observed
colour-luminosity-metallicity relations, we conclude that the bulk of the ICM
gas and metals does not originate within their precursors.Comment: 43 pages, 8 figures, LaTeX, also available at
http://msowww.anu.edu.au/~gibson/publications.html, to appear in ApJ, Vol
473, 1997, in pres
A comparison of ISCCP and FIRE satellite cloud parameters
One of the goals of the First ISCCP Regional Experiment (FIRE) is the quantification of the uncertainties in the cloud parameter products derived by the International Satellite Cloud Climatology Project (ISCCP). This validation effort has many facets including sensitivity analyses and comparisons to similar data or theoretical results with known accuracies. The FIRE provides cloud-truth data at particular points or along particular lines from surface and aircraft measurement systems. Relating these data to the larger, area-averaged ISCCP results requires intermediate steps using higher resolution satellite data analyses. Errors in the cloud products derived with a particular method can be determined by performing analyses of high resolution satellite data over the area surrounding the point or line measurement. This same analysis technique may then be used to derive cloud parameters over a larger area containing similar cloud fields. It is assumed that the uncertainties found for the small scale analyses are the same for the large scale so that the method has been calibrated for the particular cloud type; i.e., its accuracy is known. Differences between the large scale results using the ISCCP technique and the calibrated method can be computed and used to determine if any significant biases or rms errors occur in the ISCCP results. Selected ISCCP results are compared to cloud parameters derived using the hybrid bispectral threshold method over the FIRE IFO and extended observation areas
Satellite-derived cloud fields during the FIRE cirrus IFO case study
The First ISCCP Regional Experiment (FIRE) Cirrus Intensive Field Observation (IFO) program measured cirrus cloud properties with a variety of instruments from the surface, aircraft, and satellites. Surface and aircraft observations provide a small scale point and line measurements of different micro- and macro-physical properties of advecting and evolving cloud systems. Satellite radiance data may be used to measure the areal variations of the bulk cloud characteristics over meso- and large scales. Ideally, the detailed cloud properties derived from the small scale measurements should be tied to the bulk cloud properties typically derived from the satellite data. Full linkage of these data sets for a comprehensive description of a given cloud field, one of the goals of FIRE, should lead to significant progress in understanding, measuring, and modeling cirrus cloud systems. The relationships derived from intercomparisons of lidar and satellite data by Minnis et al. are exploited in a mesoscale analysis of the satellite data taken over Wisconsin during the Cirrus IFO case study
The prevalence of dust on the exoplanet HD 189733b from Hubble and Spitzer observations
The hot Jupiter HD189733b is the most extensively observed exoplanet. Its
atmosphere has been detected and characterised in transmission and eclipse
spectroscopy, and its phase curve measured at several wavelengths. This paper
brings together results of our campaign to obtain the complete transmission
spectrum of the atmosphere of this planet from UV to IR with HST, using STIS,
ACS and WFC3. We provide a new tabulation of the transmission spectrum across
the entire visible and IR range. The radius ratio in each wavelength band was
rederived to ensure a consistent treatment of the bulk transit parameters and
stellar limb-darkening. Special care was taken to correct for, and derive
realistic estimates of the uncertainties due to, both occulted and unocculted
star spots. The combined spectrum is very different from the predictions of
cloud-free models: it is dominated by Rayleigh scattering over the whole
visible and near infrared range, the only detected features being narrow Na and
K lines. We interpret this as the signature of a haze of condensate grains
extending over at least 5 scale heights. We show that a dust-dominated
atmosphere could also explain several puzzling features of the emission
spectrum and phase curves, including the large amplitude of the phase curve at
3.6um, the small hot-spot longitude shift and the hot mid-infrared emission
spectrum. We discuss possible compositions and derive some first-order
estimates for the properties of the putative condensate haze/clouds. We finish
by speculating that the dichotomy between the two observationally defined
classes of hot Jupiter atmospheres, of which HD189733b and HD209458b are the
prototypes, might not be whether they possess a temperature inversion, but
whether they are clear or dusty. We also consider the possibility of a
continuum of cloud properties between hot Jupiters, young Jupiters and L-type
brown dwarfs.Comment: Accepted for publication in MNRAS. 31 pages, 19 figures, 8 table
ERBE and AVHRR Cirrus cloud fire study
Understanding the impact of cirrus clouds on the global radiation budget is essential to determining the role of clouds in the process of climate change. The ongoing Earth Radiation Budget Experiment (ERBE) is charged with measuring the global radiation balance at the top of the atmosphere. The International Satellite Cloud Climatology Project (ISCCP) is measuring global cloud amounts and properties over a time frame similar to ERBE. Specific cloud properties are absent from the ERBE program, while ISCCP lacks the broadband radiances necessary to determine the total radiation fields. Together, results from these two global programs have the potential for improving the knowledge of the relationship between cirrus clouds and the Earth radiation balance. The First ISCCP Regional Experiment (FIRE), especially its cirrus Intensive Field Observations (IFO), provides opportunities for studying radiation measurements from the ERBE taken over areas with known cirrus cloud properties. Satellite measurements taken during the IFO are used to determine the broadband radiation fields over cirrus clouds and to examine the relationship between narrowband and broadband radiances over various known scenes. The latter constitutes the link between the ERBE and the ISCCP
Constraints on Early Nucleosynthesis from the Abundance Pattern of a Damped Ly-alpha System at z = 2.626
We have investigated chemical evolution in the young universe by analysing
the detailed chemical enrichment pattern of a metal-rich galaxy at high
redshift. The recent detection of over 20 elements in the gas-phase of a damped
Lyman-alpha absorber (DLA) at z = 2.626 represents an exciting new avenue for
exploring early nucleosynthesis. Given a strict upper age of ~2.5 Gyr and a
gas-phase metallicity about one third solar, we have shown the DLA abundance
pattern to be consistent with the predictions of a chemical evolution model in
which the interstellar enrichment is dominated by massive stars with a small
contribution from Type Ia supernovae. Discrepancies between the empirical data
and the models are used to highlight outstanding issues in nucleosynthesis
theory, including a tendency for Type II supernovae models to overestimate the
magnitude of the "odd-even" effect at subsolar metallicities. Our results
suggest a possible need for supplemental sources of magnesium and zinc, beyond
that provided by massive stars.Comment: 12 pages, 7 figs. Accepted for publication in ApJ (The Astrophysical
Journal
- …