Black holes in the low mass gap: Implications for gravitational wave observations

Binary neutron-star mergers will predominantly produce black-hole remnants of mass $\sim 3-4\,M_{\odot}$, thus populating the putative \emph{low mass gap} between neutron stars and stellar-mass black holes. If these low-mass black holes are in dense astrophysical environments, mass segregation could lead to "second-generation" compact binaries merging within a Hubble time. In this paper, we investigate possible signatures of such low-mass compact binary mergers in gravitational-wave observations. We show that this unique population of objects, if present, will be uncovered by the third-generation gravitational-wave detectors, such as Cosmic Explorer and Einstein Telescope. Future joint measurements of chirp mass ${\cal M}$ and effective spin $\chi_{\rm eff}$ could clarify the formation scenario of compact objects in the low mass gap. As a case study, we show that the recent detection of GW190425 (along with GW170817) favors a double Gaussian mass model for neutron stars, under the assumption that the primary in GW190425 is a black hole formed from a previous binary neutron star merger.Comment: 8 pages, 4 figures, 1 table. v4: matches the version accepted for publication in Phys. Rev.

Homologation of the Fischer Indolization: A Quinoline Synthesis via Homo‐Diaza‐Cope Rearrangement

We disclose a new Brønsted acid promoted quinoline synthesis, proceeding via homo‐diaza‐Cope rearrangement of N‐aryl‐N′‐cyclopropyl hydrazines. Our strategy can be considered a homologation of Fischer's classical indole synthesis and delivers 6‐membered N‐heterocycles, including previously inaccessible pyridine derivatives. This approach can also be used as a pyridannulation methodology toward constructing polycyclic polyheteroaromatics. A computational analysis has been employed to probe plausible activation modes and to interrogate the role of the catalyst

Fatigue behavior of foreign object damaged 7075 heat treated aluminum alloy coated with PVD WC/C

AbstractThe effect of a physically vapor deposited (PVD) WC/C coating on the fatigue behavior of as produced and foreign object damaged (FOD) solution heat treated and aged 7075 aluminum alloy was studied. Coated and uncoated samples were tested under rotating bending to determine the fatigue strengths between 104 and 106 cycles in both damaged and smooth condition. FOD was produced with single shots of small hard steel spheres impacting at 100 m/s in the minimum cross section. SEM was used to characterize the features of the fracture surfaces

The Digital Image Correlation technique applied to the deformation behavior of welded sheet joints

The existence of a welded zone generally influences the local strain and stress distribution especially in case of welding defects. A method able to measure the local deformability can hence give many important information about the real stress and strain fields useful to improve the welded structure design. In this experimental work, some new generation automotive steels have been considered, because of the well known welding problems due to their unstable microstructural condition. Such materials, known as Q&P steels and available only as thin sheets, require a suitable quenching process able to give high mechanical resistance and satisfying deformability. Some sheet samples were welded by electron beam technique, because it is able to reduce the width of the heat affected zone where the main microstructural changes are concentrated. From such samples, tensile specimens were machined. During the tensile tests, the deformations were measured both by a traditional extensometer and by a 3D Digital Image Correlation (3D DIC) technique. A preliminary investigation of the melted and the heat affected zones resulted in small dimensions (about 10 mm) and hence the measuring setup has been optimized in order maximize the achievable measuring resolution minimizing the resulting uncertainty. This result can be achieved by a pattern generated by a suitable software and by an accurate preparation of the surface where the pattern will be deposited on

Unified Approach to Imidodiphosphate-Type Brønsted Acids with Tunable Confinement and Acidity

We have designed and realized an efficient and operationally simple single-flask synthesis of imidodiphosphate-based Brønsted acids. The methodology proceeds via consecutive chloride substitutions of hexachlorobisphosphazonium salts, providing rapid access to imidodiphosphates (IDP), iminoimidodiphosphates (iIDP), and imidodiphosphorimidates (IDPi). These privileged acid catalysts feature a broad acidity range (pKa from ∼11 to 95:5 er) sulfoxidation of methyl n-propyl sulfide. Furthermore, the methodology delivers a novel, rationally designed super acidic catalyst motif, imidodiphosphorbis(iminosulfonylimino)imidate (IDPii), the extreme reactivity of which exceeds commonly employed super-Brønsted acids, such as trifluoromethanesulfonic acid. The unique reactivity of one such IDPii catalyst has been demonstrated in the first α-methylation of a silyl ketene acetal with methanol as the electrophilic alkylating reagent

Characterisation of flow dynamics within and around an isolated forest, through measurements and numerical simulations

The case study of ‘Bosco Fontana’, a densely-vegetated forest located in the north of Italy, is analysed both experimentally and numerically to characterise the internal ventilation of a finite forest with a vertically non-homogeneous canopy. Measurements allow for the evaluation of the turbulent exchange across the forest canopy. The case study is then reproduced numerically via a two-dimensional RANS simulation, successfully validated against experimental data. The analysis of the internal ventilation leads to the identification of seven regions of motion along the predominate-wind direction, for whose definition a new in-canopy stability parameter was introduced. In the vertical direction, the non-homogeneity of the canopy leads to the separation of the canopy layer into an upper foliage layer and a lower bush layer, characterised respectively by an increasing streamwise velocity and turbulence intensity, and a weak backflow. The conclusions report an improved description of the dynamic layer and regions of motion presented in the literature

Preparation of Neutral trans - Cis [Ru(O2CR)2P2(NN)], Cationic [Ru(O2CR)P2(NN)](O2CR) and Pincer [Ru(O2CR)(CNN)P2] (P = PPh3, P2= diphosphine) Carboxylate Complexes and their Application in the Catalytic Carbonyl Compounds Reduction

The diacetate complexes trans-[Ru(\u3ba1-OAc)2(PPh3)2(NN)] (NN = ethylenediamine (en) (1), 2-(aminomethyl)pyridine (ampy) (2), 2-(aminomethyl)pyrimidine (ampyrim) (3)) have been isolated in 76-88% yield by reaction of [Ru(\u3ba2-OAc)2(PPh3)2] with the corresponding nitrogen ligands. The ampy-type derivatives 2 and 3 undergo isomerization to the thermodynamically most stable cationic complexes [Ru(\u3ba1-OAc)(PPh3)2(NN)]OAc (2a and 3a) and cis-[Ru(\u3ba1-OAc)2(PPh3)2(NN)] (2b and 3b) in methanol at RT. The trans-[Ru(\u3ba1-OAc)2(P2)2] (P2 = dppm (4), dppe (5)) compounds have been synthesized from [Ru(\u3ba2-OAc)2(PPh3)2] by reaction with the suitable diphosphine in toluene at 95 \ub0C. The complex cis-[Ru(\u3ba1-OAc)2(dppm)(ampy)](6) has been obtained from [Ru(\u3ba2-OAc)2(PPh3)2] and dppm in toluene at reflux and reaction with ampy. The derivatives trans-[Ru(\u3ba1-OAc)2P2(NN)] (7-16; NN = en, ampy, ampyrim, 8-aminoquinoline; P2 = dppp, dppb, dppf, (R)-BINAP) can be easily synthesized from [Ru(\u3ba2-OAc)2(PPh3)2] with a diphosphine and treatment with the NN ligands at RT. Alternatively these compounds have been prepared from trans-[Ru(OAc)2(PPh3)2(NN)] by reaction with the diphosphine in MEK at 50 \ub0C. The use of (R)-BINAP affords trans-[Ru(\u3ba1-OAc)2((R)-BINAP)(NN)] (NN = ampy (11), ampyrim (15)) isolated as single stereoisomers. Treatment of the ampy-type complexes 8-15 with methanol at RT leads to isomerization to the cationic derivatives [Ru(\u3ba2-OAc)P2(NN)]OAc (8a-15a; NN = ampy, ampyrim; P2 = dppp, dppb, dppf, (R)-BINAP). Similarly to 2, the dipivalate trans-[Ru(\u3ba1-OPiv)2(PPh3)2(ampy)] (18) is prepared from [Ru(\u3ba2-OPiv)2(PPh3)2] (17) and ampy in CHCl3. The pincer acetate [Ru(\u3ba1-OAc)(CNNOMe)(PPh3)2] (19) has been synthesized from [Ru(\u3ba2-OAc)2(PPh3)2] and HCNNOMe ligand in 2-propanol with NEt3 at reflux. In addition, the dppb pincer complexes [Ru(\u3ba1-OAc)(CNN)(dppb)] (CNN = AMTP (20), AMBQPh (21)) have been obtained from [Ru(\u3ba2-OAc)2(PPh3)2], dppb, and HAMTP or HAMBQPh with NEt3, respectively. The acetate NN and pincer complexes are active in transfer hydrogenation with 2-propanol and hydrogenation with H2 of carbonyl compounds at S/C values of up to 10000 and with TOF values of up to 160000 h-1

Left ventricular assist device and transcatheter edge-to-edge mitral valve repair in advanced heart failure: allies or enemies?

The implantation of left ventricular assist devices (LVADs) has been increasing, with good long-term results, in parallel with a growing population with advanced heart failure (HF). However, in some European countries, LVADs are still underused, with one of the main issues being the patient's late referral. On the contrary, the use of transcatheter edge-to-edge mitral valve repair (TEER) has exponentially increased over the past decade, expanding its potential use even in patients on the heart transplantation waiting list. Even though the study populations of the main trials that investigated the prognostic impact of LVAD and TEER are different, in clinical practice a clear distinction might not be so clear. Therefore, patients with refractory HF symptoms and significant mitral regurgitation should be thoroughly evaluated through a multidisciplinary Heart Team meeting with both an advanced HF specialist and interventional cardiologist, to avoid futile procedures and to define the optimal timing for advanced HF therapies, when they are indicated. We analyzed the main available studies and registries on both TEERs and LVADs and we compared their populations and outcomes, to provide the current evidence on the use of LVAD and TEER in the HF population, especially in the light of the recently released 5-year follow-up results, giving some insights on the Italian situation, and finally to stress the importance of a solid HF network between hospitals, aiming for advanced HF patients' timely referral for LVAD or heart transplants