32 research outputs found
Variation in the distribution of a phthalocyanine photosensitizer in naturally occurring tumors of animals
Recommended from our members
Free electron laser ablation of articular and fibro-cartilage at 2.79, 2.9, 6.1, and 6.45 microm: mass removal studies.
Background and objectiveThe wavelength and tissue-composition dependence of cartilage ablation was examined using selected mid-infrared laser wavelengths.Study design/materials and methodsThe mass removal produced by pulsed laser ablation of articular and fibro-cartilage (meniscus) were measured. The wavelengths examined were 2.79, 2.9, 6.1, and 6.45 microm and provided by a free electron laser (FEL) emitting 4 microsecond macropulses consisting of 1-2 picoseconds duration micropulses delivered at 350 picosecond intervals. The measurement of tissue mass removal was conducted using a microbalance during laser ablation.ResultsThese studies demonstrated that for articular cartilage the highest mass removal was achieved at lambda = 6.1 microm followed by, in order, lambda = 2.79, 2.9, and 6.45 microm. In comparison, the maximum mass removal for fibro-cartilage was achieved using lambda = 6.1 microm radiation with no statistically significant differences in mass removal provided by the other wavelengths. In evaluation of the comparative influence of each wavelength on tissue type, there was no difference in ablation efficiency between articular and fibro-cartilage at lambda = 6.1 microm. However, the ablation efficiency of articular cartilage was higher than that of fibro-cartilage at both lambda = 2.79 and 2.9 microm. By contrast, lambda = 6.45 microm radiation ablated fibro-cartilage more efficiently than articular cartilage at radiant exposures greater than 12 J/cm2.ConclusionsThe mass removal of articular and fibro-cartilage produced by FEL ablation at selected mid-IR wavelengths was measured as a function of incident radiant exposure. The ablation efficiency was found to depend on both wavelength and tissue type. The 6.1 microm wavelength was found to provide the highest ablation efficiency for both articular and fibro-cartilage
Recommended from our members
Free electron laser ablation of articular and fibro-cartilage at 2.79, 2.9, 6.1, and 6.45 microm: mass removal studies.
Background and objectiveThe wavelength and tissue-composition dependence of cartilage ablation was examined using selected mid-infrared laser wavelengths.Study design/materials and methodsThe mass removal produced by pulsed laser ablation of articular and fibro-cartilage (meniscus) were measured. The wavelengths examined were 2.79, 2.9, 6.1, and 6.45 microm and provided by a free electron laser (FEL) emitting 4 microsecond macropulses consisting of 1-2 picoseconds duration micropulses delivered at 350 picosecond intervals. The measurement of tissue mass removal was conducted using a microbalance during laser ablation.ResultsThese studies demonstrated that for articular cartilage the highest mass removal was achieved at lambda = 6.1 microm followed by, in order, lambda = 2.79, 2.9, and 6.45 microm. In comparison, the maximum mass removal for fibro-cartilage was achieved using lambda = 6.1 microm radiation with no statistically significant differences in mass removal provided by the other wavelengths. In evaluation of the comparative influence of each wavelength on tissue type, there was no difference in ablation efficiency between articular and fibro-cartilage at lambda = 6.1 microm. However, the ablation efficiency of articular cartilage was higher than that of fibro-cartilage at both lambda = 2.79 and 2.9 microm. By contrast, lambda = 6.45 microm radiation ablated fibro-cartilage more efficiently than articular cartilage at radiant exposures greater than 12 J/cm2.ConclusionsThe mass removal of articular and fibro-cartilage produced by FEL ablation at selected mid-IR wavelengths was measured as a function of incident radiant exposure. The ablation efficiency was found to depend on both wavelength and tissue type. The 6.1 microm wavelength was found to provide the highest ablation efficiency for both articular and fibro-cartilage
Recommended from our members
Mid-IR laser ablation of articular and fibro-cartilage: a wavelength dependence study of thermal injury and crater morphology.
Background and objectiveThe aim of this study was to evaluate areas of collateral thermal injury and crater morphology for evidence of wavelength-dependent effects on the ablation of articular cartilage and fibro-cartilage (meniscus) using selected mid-IR wavelengths produced by a free electron laser.Study design/materials and methodsTwo types of cartilage, articular cartilage and fibro-cartilage were used in the study. The wavelengths (lambda) evaluated were 2.79, 2.9, 6.1, and 6.45 microm generated by a free electron laser (FEL) using a 4 microseconds macropulse configuration. The zone of thermal injury and crater morphology produced by laser ablation were examined by light microscopy following standard histologic processing.ResultsThe zone of thermal injury and crater morphology created in cartilage by the FEL at selected mid-IR wavelengths were examined as a function of incident radiant exposure. Ablation using lambda = 6.1 microm provided the largest crater size for both articular and fibro-cartilage at all radiant exposures. For the zones of collateral thermal injury in articular cartilage, lambda = 6.1 microm produced the least thermal injury at the radiant exposure of 7.6 J/cm2. When the radiant exposure is increased to 20.4 J/cm2, both lambda = 6.1 and 6.45 microm produced less thermal injury than the ablation using lambda = 2.79 and 2.9 microm. The greatest amount of collateral thermal injury was produced by lambda = 2.79 microm for both tissue types.ConclusionsThe results demonstrate that crater depth and collateral thermal injury produced in articular cartilage and fibro-cartilage are wavelength-dependent with 6.1 microm providing the largest craters at all radiant exposures. The least amount of thermal injury was created in articular cartilage using lambda = 6.1 microm at the radiant exposure of 7.6 J/cm2. Both 6.1 and 6.45 microm wavelengths demonstrated similar amount of thermal injury at 20 J/cm2 that was less than lambda = 2.79 and 2.9 microm at similar fluences. These observations are explained based on the absorption by water and protein in the tissue types studied. It is further observed that the use of crater dimensions may not provide a reliable estimate for the amount of tissue removal provided by an ablation procedure
Recommended from our members
Mid-IR laser ablation of articular and fibro-cartilage: a wavelength dependence study of thermal injury and crater morphology.
Background and objectiveThe aim of this study was to evaluate areas of collateral thermal injury and crater morphology for evidence of wavelength-dependent effects on the ablation of articular cartilage and fibro-cartilage (meniscus) using selected mid-IR wavelengths produced by a free electron laser.Study design/materials and methodsTwo types of cartilage, articular cartilage and fibro-cartilage were used in the study. The wavelengths (lambda) evaluated were 2.79, 2.9, 6.1, and 6.45 microm generated by a free electron laser (FEL) using a 4 microseconds macropulse configuration. The zone of thermal injury and crater morphology produced by laser ablation were examined by light microscopy following standard histologic processing.ResultsThe zone of thermal injury and crater morphology created in cartilage by the FEL at selected mid-IR wavelengths were examined as a function of incident radiant exposure. Ablation using lambda = 6.1 microm provided the largest crater size for both articular and fibro-cartilage at all radiant exposures. For the zones of collateral thermal injury in articular cartilage, lambda = 6.1 microm produced the least thermal injury at the radiant exposure of 7.6 J/cm2. When the radiant exposure is increased to 20.4 J/cm2, both lambda = 6.1 and 6.45 microm produced less thermal injury than the ablation using lambda = 2.79 and 2.9 microm. The greatest amount of collateral thermal injury was produced by lambda = 2.79 microm for both tissue types.ConclusionsThe results demonstrate that crater depth and collateral thermal injury produced in articular cartilage and fibro-cartilage are wavelength-dependent with 6.1 microm providing the largest craters at all radiant exposures. The least amount of thermal injury was created in articular cartilage using lambda = 6.1 microm at the radiant exposure of 7.6 J/cm2. Both 6.1 and 6.45 microm wavelengths demonstrated similar amount of thermal injury at 20 J/cm2 that was less than lambda = 2.79 and 2.9 microm at similar fluences. These observations are explained based on the absorption by water and protein in the tissue types studied. It is further observed that the use of crater dimensions may not provide a reliable estimate for the amount of tissue removal provided by an ablation procedure
Recommended from our members
Use of polarization-sensitive optical coherence tomography to determine the directional polarization sensitivity of articular cartilage and meniscus.
The directional polarization sensitivity of articular cartilage and meniscus is investigated by use of polarization-sensitive optical coherence tomography (PS-OCT) by varying the angle of incident illumination. Experimental results show that when the incident light is perpendicular to the tissue surface, normal articular cartilage demonstrates little polarization sensitivity, while meniscus demonstrates strong polarization sensitivity. Differences in optical phase retardation produced by articular cartilage and meniscus are observed when the incident angle of the scanning light beam is adjusted between 0 and 90 deg relative to the tissue surface. Directional polarization sensitivity of articular cartilage and meniscus as obtained by PS-OCT imaging using variations in the angle of incident illumination can be used to assess the orientation and organization of the collagen matrix of these tissues. The polarization sensitivity as evidenced by the Stokes vector and optical phase retardation images can be explained by the orientation of the angle of illumination relative to the unique structural organization of the collagen fibrils and fibers of articular cartilage and meniscus
Recommended from our members
Directional polarization sensitivity of articular cartilage by optical coherence tomography
Recommended from our members