Towards control of the optoelectronic properties of organic-inorganic perovskites

In this thesis we have aimed to tune and control the optoelectronic properties of organic-inorganic metal halide perovskites by systematically changing components in the structure and studying the charge carrier dynamic mechanisms....ChemE/Opto-electronic Material

Temperature Dependent Charge Carrier Dynamics in Formamidinium Lead Iodide Perovskite

The fundamental opto-electronic properties of organic-inorganic hybrid perovskites are strongly affected by their structural parameters. These parameters are particularly critical in formamidinium lead iodide (FAPbI3), in which its large structural disorder leads to a non-perovskite yellow phase that hinders its photovoltaic performance. A clear understanding of how the structural parameters affect the opto-electronic properties is currently lacking. We have studied the opto-electronic properties of FAPbI3 using microwave conductivity measurements. We find that the mobility of FAPbI3 increases at low temperature following a phonon scattering behavior. Unlike methylammonium lead iodide (MAPbI3), there are no abrupt changes after the low-temperature β/γ phase transition and the lifetime is remarkably long. This absence of abrupt changes can be understood in terms of the reduced rotational freedom and smaller dipole moment of the formamidinium, as compared to methylammonium.ChemE/Opto-electronic Material

Band-Like Charge Transport in Cs₂AgBiBr₆ and Mixed Antimony-Bismuth Cs₂AgBi_{1- x}Sb_xBr₆ Halide Double Perovskites

Recently, halide double perovskites (HDPs), such as Cs2AgBiBr6, have been reported as promising nontoxic alternatives to lead halide perovskites. However, it remains unclear whether the charge-transport properties of these materials are as favorable as for lead-based perovskites. In this work, we study the mobilities of charges in Cs2AgBiBr6 and in mixed antimony-bismuth Cs2AgBi1-xSbxBr6, in which the band gap is tunable from 2.0 to 1.6 eV. Using temperature-dependent time-resolved microwave conductivity techniques, we find that the mobility is proportional to T-p (with p ≈ 1.5). Importantly, this indicates that phonon scattering is the dominant scattering mechanism determining the charge carrier mobility in these HDPs similar to the state-of-the-art lead-based perovskites. Finally, we show that wet chemical processing of Cs2AgBi1-xSbxBr6 powders is a successful route to prepare thin films of these materials, which paves the way toward photovoltaic devices based on nontoxic HDPs with tunable band gaps.ChemE/Opto-electronic Material

Effect of Structural Defects and Impurities on the Excited State Dynamics of 2D BA₂PbI₄ Perovskite

In this work, we show that the quality of the precursor and the thin film preparation strongly affect the optoelectronic properties of the 2D perovskite BA2PbI4. 2D perovskites with alkylammonium organic cations such as butylammonium (BA) are relatively soft structures that exhibit large dynamic disorder and phase variations. Here we show, by a variety of spectroscopy techniques (steady state absorption, photoluminescence and ultrafast transient absorption), that at temperatures below the phase transition (253 K) the material exhibits excitonic features from the room temperature phase (due to incomplete structural transition) and a broadband emission at 560–600 nm (due to self-trapped excitons) with varied relative intensities depending on the precursors and processing conditions. This suggests that the processing conditions have a large influence on the crystallization and introduction of extrinsic defect impurities directly affecting the optoelectronic properties. Making absolute statements about the properties of BA2PbI4 requires improved control over the materials thin film deposition and a better understanding of the role of the lattice vibrational dynamics and extrinsic defects on the exciton dynamics.ChemE/Opto-electronic Material

Inducing Charge Separation in Solid-State Two-Dimensional Hybrid Perovskites through the Incorporation of Organic Charge-Transfer Complexes

Two-dimensional (2D) hybrid perovskites make up an emerging class of materials for optoelectronic applications in which inorganic octahedral layers are separated by nonconductive large organic cations. This leads to a high-dimensional and dielectric confinement and hence a high exciton binding energy, which severely limits their application in devices in which charge carrier separation is required. In this work, we achieve improved charge separation by replacing nonconductive organic cations with organic charge-transfer complexes consisting of a pyrene donor and a tetracyanoquinodimethane acceptor. Steady-state absorption measurements show that these materials exhibit optical features that match with the absorption of the organic charge-transfer complexes. Using microwave conductivity and femtosecond transient absorption, we show that photoexcitation of these charge-transfer states leads to long-lived mobile charges in the inorganic layers. While the efficiency of charge separation is relatively low, these experiments demonstrate that it is possible to induce charge separation in solid-state 2D perovskites by engineering the organic layer.ChemE/Opto-electronic Material

Overcoming the exciton binding energy in two-dimensional perovskite nanoplatelets by attachment of conjugated organic chromophores

In this work we demonstrate a novel approach to achieve efficient charge separation in dimensionally and dielectrically confined two-dimensional perovskite materials. Two-dimensional perovskites generally exhibit large exciton binding energies that limit their application in optoelectronic devices that require charge separation such as solar cells, photo-detectors and in photo-catalysis. Here, we show that by incorporating a strongly electron accepting moiety, perylene diimide organic chromophores, on the surface of the two-dimensional perovskite nanoplatelets it is possible to achieve efficient formation of mobile free charge carriers. These free charge carriers are generated with ten times higher yield and lifetimes of tens of microseconds, which is two orders of magnitude longer than without the peryline diimide acceptor. This opens a novel synergistic approach, where the inorganic perovskite layers are combined with functional organic chromophores in the same material to tune the properties for specific applications.ChemE/Opto-electronic MaterialsChemE/Advanced Soft Matte

Charge Carrier Dynamics in Cs₂AgBiBr₆ Double Perovskite

Double perovskites, comprising two different cations, are potential nontoxic alternatives to lead halide perovskites. Here, we characterized thin films and crystals of Cs2AgBiBr6 by time-resolved microwave conductance (TRMC), which probes formation and decay of mobile charges upon pulsed irradiation. Optical excitation of films results in the formation of charges with a yield times mobility product, φΣμ > 1 cm2/Vs. On excitation of millimeter-sized crystals, the TRMC signals show, apart from a fast decay, a long-lived tail. Interestingly, this tail is dominant when exciting close to the bandgap, implying the presence of mobile charges with microsecond lifetimes. From the temperature and intensity dependence of the TRMC signals, we deduce a shallow trap state density of around 1016/cm3 in the bulk of the crystal. Despite this high concentration, trap-assisted recombination of charges in the bulk appears to be slow, which is promising for photovoltaic applications.ChemE/Opto-electronic Material

Unravelling the structural complexity and photophysical properties of adamantyl-based layered hybrid perovskites

Layered hybrid perovskites comprising adamantyl spacer (A) cations based on the A2FAn−1PbnI3n+1(n= 1-3, FA = formamidinium) compositions have recently been shown to act as promising materials for photovoltaic applications. While the corresponding perovskite solar cells show performances and stabilities that are superior in comparison to other layered two-dimensional formamidinium-based perovskite solar cells, the underlying reasons for their behaviour are not well understood. We provide a comprehensive investigation of the structural and photophysical properties of this unique class of materials, which is complemented by theoretical analysisviamolecular dynamics simulations and density functional theory calculations. We demonstrate the formation of well-defined structures of lower compositional representatives based onn= 1-2 formulations with (1-adamantyl)methanammonium spacer moieties, whereas higher compositional representatives (n> 2) are shown to consist of mixtures of low-dimensional phases evidenced by grazing incidence X-ray scattering. Furthermore, we reveal high photoconductivities of the corresponding hybrid perovskite materials, which is accompanied by long charge carrier lifetimes. This study thereby unravels features that are relevant for the performance of FA-based low-dimensional hybrid perovskites.ChemE/Opto-electronic MaterialsIndustrial Design EngineeringElectrical Engineering, Mathematics and Computer Scienc

Formamidinium-Based Dion-Jacobson Layered Hybrid Perovskites: Structural Complexity and Optoelectronic Properties

Layered hybrid perovskites have emerged as a promising alternative to stabilizing hybrid organic–inorganic perovskite materials, which are predominantly based on Ruddlesden-Popper structures. Formamidinium (FA)-based Dion-Jacobson perovskite analogs are developed that feature bifunctional organic spacers separating the hybrid perovskite slabs by introducing 1,4-phenylenedimethanammonium (PDMA) organic moieties. While these materials demonstrate competitive performances as compared to other FA-based low-dimensional perovskite solar cells, the underlying mechanisms for this behavior remain elusive. Here, the structural complexity and optoelectronic properties of materials featuring (PDMA)FAn–1PbnI3n+1 (n = 1–3) formulations are unraveled using a combination of techniques, including X-ray scattering measurements in conjunction with molecular dynamics simulations and density functional theory calculations. While theoretical calculations suggest that layered Dion-Jacobson perovskite structures are more prominent with the increasing number of inorganic layers (n), this is accompanied with an increase in formation energies that render n > 2 compositions difficult to obtain, in accordance with the experimental evidence. Moreover, the underlying intermolecular interactions and their templating effects on the Dion-Jacobson structure are elucidated, defining the optoelectronic properties. Consequently, despite the challenge to obtain phase-pure n > 1 compositions, time-resolved microwave conductivity measurements reveal high photoconductivities and long charge carrier lifetimes. This comprehensive analysis thereby reveals critical features for advancing layered hybrid perovskite optoelectronics.Accepted Author ManuscriptChemE/Opto-electronic Material

Electronic mobility and crystal structures of 2,5-dimethylanilinium triiodide and tin-based organic-inorganic hybrid compounds

We synthesize single crystals of a new 2,5-dimethylanilinium tin iodide organic-inorganic hybrid compound and 2,5-dimethylanilinium triiodide. Single-crystal X-ray diffraction reveals that the hybrid grows as a unique rhombohedral structure consisting of one-dimensional chains of SnI6-octahedra that share corners and edges to build up a ribbon along the [111] direction. Notably, we find that hypophosphorous acid, H3PO2, is of central importance to the formation of this hybrid. In the absence of H3PO2, we synthesize 2,5-dimethylanilinium triiodide from the same starting compounds. We investigate the synthesis routes that drive the growth of these two compounds with distinct crystal structures, appearance and properties. Pulse-radiolysis time-resolved microwave conductivity measurements and density functional theory calculations reveal that both compounds have low charge carrier mobilities and very long lifetimes, consistent with their one-dimensional structural characteristics. Our findings give a better understanding of the relation between synthesis, crystal structures and charge carrier mobilities.ChemE/Opto-electronic Material