804 research outputs found
A Network Structure for Diagnosis of Four Types of Faults in Reed-Muller Canonical Circuits
In this paper, a new network structure and its associated universal test set, independent of the circuit function, and dependent only on the number of function variables, with good fault diagnosing capabilities have been proposed for single stuck-at, double stuck-at, AND-bridging and OR-bridging faults in Exclusive-OR Sum of Products (ESOP) Reed-Muller Canonical (RMC) circuits
Performance Characteristics of Carbon Nanotube Field Effect Transistor based Immunosensor
Carbon nanotube biosensors are used to detect DNA and Proteins. Transistor with array of Carbon nanotubes has proved to enhance in their performance compared to that of conventional Si based. A device with array of Carbon nanotube to respond the Osteopontin (OPN) is a potential new biomarker of prostate cancer has been developed and proposed in this paper. The simulation of the biosensor is simulated using biosensor lab version-2 online through nanohub.org. The performance of the device is checked with a) settling time b) settling time and sensitivity. It is observed that the device reacts with change in time, molecule concentration, buffer-ion concentration. The settling time of the device is found to be 1 second
Isolation, screening of Aspergillus flavus and its production parameters for á- amylase under solid state fermentation
The amylase producing fungi were isolated from spoiled fruits, vegetables and soil, in and around Bangalore, Karnataka, India. The isolates were identified and five fungal species were screened. The best amylase producer among them, Aspergillus sp was selected for enzyme production by both sub merged fermentation using mineral salt medium (MSM) and solid state fermentations using wheat bran as a solid substrate. The various parameters influencing solid state fermentation were optimized. The most important factors are such as pH, incubation temperature, incubation period, carbon sources, nitrogen sources and moisture content. The maximum amount of enzyme production was obtained when solid state fermentation was carried out with soluble starch as carbon source and beef extract (1% each) as nitrogen source, optimum conditions of pH 7.0, an incubation temperature of 25 (±2) °C, incubation time 96 h and 62% moisture content
A preliminary pharmacognostical study on leaves and flowers of Michelia champaca L. Magnoliaceae
The present investigation was conducted to establish pharmacognostical profile for the leaves and flowers of Michelia champaca L. (Magnoliaceae) in order to establish its complete profile to aid in its identification and avoid confusion in taxonomic level for different species of the same genus. The study included macroscopical, organoleptical, microscopical and preliminary phytochemical analysis of the leaves and flowers. The study of the organoleptical evaluation revealed the presence of colour, odour and texture. The microscopic analysis showed thedifferences in cell structures, arrangement and shape of leaves and flowers. The physical characters of various solvent extracts showed the presence of colour, odour and consistency of the powdered leaves and flowers. Finally, the preliminary phytochemical analysis confirmed for the presence of alkaloids, saponins, tannins, glycosides, carbohydrates, amino acid, flavonoids and sterols in both leaves and flowers. The present findings may be used to establish the authenticity of leaves and flowers of Michelia champaca L. for their proper identification and standardization in order to collect raw plants for the preparation of herbal drugs
Antimicrobial effect of Lagenaria siceraria (Mol.) Standley, against certain bacteria and fungal strains
This study was performed to evaluate the antibacterial and antifungal potency of Lagenaria siceraria (Mol.) Standley, commonly known as bottle gourd belonging to the family Cucurbitaceae. Petroleum Ether, Chloroform, Methanol, Absolute alcohol and Water showed a majority of the compound including Steroids, Alkaloids, Tannins, Flavonoids, Lactones and Carbohydrates. All the five extracts were prepared by using soxhlet apparatus and the extracts showed moderate to potent antimicrobial activity against the bacterial strains: Escherichia coli, Enterococcus faecalis, Klebsiella pneumonia, Salmonella typhi, Staphylococcus aureus and antifungal strains: such as Aspergillus flavus, Aspergillus oryzae and Trichoderma harzianum
Molecular docking analysis on 16 therapeutic ligands of Ocimum tenuiflorum L. (Tulasi) and their prospects in drug design for COVID-19
The PyRx software and Discovery studio were used in the present molecular docking studies of the 16 ligands of Ocimum tenuiflorum L., selected based on their high therapeutic potentials, viz., (E)-6-hydroxy-4,6-dimethylhept-3-en-2-one, Apigenin, Bieugenol, Cirsilineol, Cirsimaritin, β-Caryophyllene epoxide, Dehydrodieugenol B, Eugenol, Ferulaldehyde, Isothymonin, Isothymusin, Linalool, Luteolin, Ocimarin, Rosmarinic acid, and Thymol. Saquinavir was used as a positive control. The binding affinities of the 16 ligands to the main proteases of COVID-19 6LU7 and 6Y2E (critical for viral replication) and their ability to arrest the virus replication were recorded. The binding affinities of the ligands to 6LU7 and 6Y2E ranged from -4.3 and -4.7 kcal/mol (for (E)-6-hydroxy-4,6-dimethylhept-3-en-2-one) to -7.6 (for Rosmarinic acid to both target proteins). While the corresponding values for the control drug Saquinavir were -7.8 and -7.6 respectively. The Rosmarinic acid, in binding with both the proteases (-7.6 and -7.6 kcal/mol) showed six conventional hydrogen bonds, one carbon hydrogen bond (ASP 153 had one conventional hydrogen bond and one carbon hydrogen bond), one Pi-alkyl bond, one Pi-Pi stacked bond, eight van der waals bonds for 6LU7 protease; it formed three conventional hydrogen bonds, two Pi-alkyl bonds, one unfavourable donor – donor bond and 14 van der waals bonds with 6Y2E protease. The control drug – Saquinavir in binding with 6LU7 protease showed 12 van der waals, one alkyl, one Pi-alkyl, one Pi-cation, one Pi-stacked and four conventional hydrogen bonds, which indicates that it has less affinity when compared with Rosmarinic acid. Similarly, the control drug on binding with 6Y2E protease exhibited ten van der waals, four Pi-alkyl, one cation and three hydrogen bonds. The results are in conformity to similar other studies, and herald a promising scope for Rosmarinic acid as lead molecule in the drug discovery for COVID-19
Influence of different types of soils on the growth and yield of Quinoa (Chenopodium quinoa Wild.)
Quinoa is a resilient high-yielding pseudo cereal, gaining attention because of its high nutritional value, strong growth potential, and tremendous source of essential amino acids, micronutrients, vitamins, phenolic compounds, and minerals. The main aim of this investigation was to find the best suitable soil type for maximizing the growth and yield of Quinoa. The pot study was undertaken at the Department of Agronomy, Tamil Nadu Agricultural University, Coimbatore, during the Kharif 2022 season. Eight soil samples (clay loam soils of wetlands of TNAU, sandy loam soils of eastern block of TNAU, sandy loam soils of Mettupalayam, sandy clay loam soils of 36 B eastern block of TNAU, sandy clay loam soils of 37 B eastern block of TNAU, clay loam soils of Ooty, sandy clay loam soils of Govindanaickenpalayam and sandy clay loam soils of Annur) were collected round Coimbatore in Tamil Nadu and tested in a complete randomized design with three replications. The pot study results revealed that growth parameters viz. Plant height (81.5 cm), number of leaves plant-1 (164.8), leaf area (317.7 cm2), number of branches plant-1 (38.0) and dry matter production (22.78 g) were significantly higher in the clay loam soils of Ooty than all other soil types. Similarly, yield attributes such as the number of panicles plant-1 (21.7), panicle length (13.08 cm), number of grains panicle-1 (3050) and grain yield plant-1 (9.60 g) of Quinoa were also higher in the same clay loam soils followed by that in sandy clay loam soils of Govindanaickenpalayam. Red soils of Mettupalayam had shown the lowest growth, yield and yield attributes of Quinoa. Based on the above results, it was concluded that the clay loam soil of Ooty was the best suited for cultivating Quinoa crops
Insect antifeedant and growth-regulating activities of salannin and other c-seco limonoids from neem oil in relation to azadirachtin
The antifeedant and insect growth-regulating activities of salannin, nimbin, and 6-deacetylnimbin, in comparison with azadirachtin-A, have been studied against Spodoptera litura, Pericallia ricini, and Oxya fuscovittata. Salannin deterred feeding, delayed molt by increasing larval duration, caused larval and pupal mortalities, and decreased pupal weights in the two lepidopterans. Salannin also caused molt delays and nymphal mortalities in Oxya fuscovittata. The role of salannin and other compounds in conferring bioactivity, along with azadirachtin-A, to neem oil/neem seed extracts is emphasized
Marine fisheries resources: exploitation, management and regulations in India
The peninsular India extending between latitudes 80 4' and 370 6' north and longitudes 680 7' and 97025' East has a coastline of about 8,219 km.The Indian Ocean covering the area between 30 and 1500 and from the Main land mass in the north to 500 south has a total area of 51 million sq km. After the declaration of the Exclusive Economic Zone (EEZ) in 1977, the area available to India is 2.02 million sq. km. comprising 0.86 million sq. km. on the East coast, 0.56
million sq. km. on the West coast and 0.60 million sq. km. around the Andaman and Nicobar islands. With the absolute right on the EEZ, India has also acquired the responsibility to conserve, protect, develop and optimally exploit the marine living resources up to 200 nautical miles of the coastline
HPLC Method for Determination of p-coumaric acid from the Medicinal Herb Leptadinia reticulata
The aim of present study was to develop and validate a simple, precise and rapid HPLC method for the quantification of p-coumaric acid in Leptadinia reticulata extractst. The analysis was performed by reverse-phase chromatography on an phenomenex C18 columns with isocratic elution of Methanol and 0.8%-Formic acid in water (6:4) at a flow rate of 1.0mL/min, a column temperature of 35°C, photodiode array detector detection at 326 nm. The method validated in terms of linearity accuracy precision LOD, LOQ and stability. The herb Leptidinia reticulata contains 0.17% p-coumaric acid. The linear range of method was 0.25-50µg/ml with correlation coefficient of 0.9993, the recovery was 98-99.4% and the relative standard deviation is 0.98 % (n=6). The developed method was found to be a relatively simple, precise and reproducible for the quantification of p-coumaric acid. The method does not employ any derivatization procedure and can be used as a quality control tool for the routine analysis of p-coumaric acid from an herb Leptadinia reticulata
- …