Effect of humidity on transonic flow

An experimental investigation of the effects of humidity-induced condensation on shock/boundary-layer interaction has been conducted in a transonic wind-tunnel test. The test geometry considered was a wall-mounted bump model inserted in the test section of the wind tunnel. The formation of a λ-shape condensation shock wave was shown from schlieren visualization and resulted in a forward movement of the shock wave, reduced shock wave strength, and reduced separation. Empirical correlations of the shock wave strength and humidity/dew point temperature were established. For humidity levels below 0.15 or a dew point temperature of 268 K, the effect of humidity was negligible. The unsteady pressure measurements showed that if a condensation shock wave formed and interacted with a main shock wave, the flow becomes unsteady with periodic flow oscillations occurring at 720 Hz

Consequences of asteroid fragmentation during impact hazard mitigation

The consequences of the fragmentation of an Earth-threatening asteroid due to an attempted deflection are examined in this paper. The minimum required energy for a successful impulsive deflection of a threatening object is computed and compared to the energy required to break up a small size asteroid. The results show that the fragmentation of an asteroid that underwent an impulsive deflection, such as a kinetic impact or a nuclear explosion, is a very plausible event.Astatistical model is used to approximate the number and size of the fragments as well as the distribution of velocities at the instant after the deflection attempt takes place. This distribution of velocities is a function of the energy provided by the deflection attempt, whereas the number and size of the asteroidal fragments is a function of the size of the largest fragment. The model also takes into account the gravity forces that could lead to a reaggregation of the asteroid after fragmentation. The probability distribution of the pieces after the deflection is then propagated forward in time until the encounter with Earth. A probability damage factor (i.e., expected damage caused by a given size fragment multiplied by its impact probability) is then computed and analyzed for different plausible scenarios, characterized by different levels of deflection energies and lead times

Research on lunar Mare emplacement and impact cratering experiments

A model was derived enabling the interpretation of lunar styles of volcanism through the analysis of various surface features. The model was applied to several areas on the Moon, including the Orientale Basin, the Smythii Basin, the Herigonious region, and several highland areas. Concurrent with the application of the model, several topical studies of various aspects of lunar volcanism were completed. A series of impact crater experiments was conducted at NASA Ames in order to determine the effect that viscous targets would have on cratering mechanics and morphology for application in studies of Martian ejecta flow craters. The results of the experiments led to a model that can account for the formation of multiple flow lobes and the general morphology of some aspects of Martian craters

Modular detergents tailor the purification and structural analysis of membrane proteins including G-protein coupled receptors

Detergents enable the purification of membrane proteins and are indispensable reagents instructural biology. Even though a large variety of detergents have been developed in the lastcentury, the challenge remains to identify guidelines that allowfine-tuning of detergents forindividual applications in membrane protein research. Addressing this challenge, here weintroduce the family of oligoglycerol detergents (OGDs). Native mass spectrometry (MS)reveals that the modular OGD architecture offers the ability to control protein purificationand to preserve interactions with native membrane lipids during purification. In addition to abroad range of bacterial membrane proteins, OGDs also enable the purification and analysisof a functional G-protein coupled receptor (GPCR). Moreover, given the modular design ofthese detergents, we anticipatefine-tuning of their properties for specific applications instructural biology. Seen from a broader perspective, this represents a significant advance forthe investigation of membrane proteins and their interactions with lipids

Review of Pioneers of Quantum Chemistry

There is little doubt that reading books other than textbooks represents an important component of maintaining knowledge for many chemistry educators. Nonetheless, with 30 or more books a year being produced by the ACS Symposium Series alone, how can choices be made about what merits reading time? Certainly, the presentation of current research trends that might influence the chemistry taught in courses represents one metric, but there are many additional worthy books. In terms of potential teaching treasures to be mined, time spent reading history of science presents a strong possibility

3D sub-nanometer analysis of glucose in an aqueous solution by cryo-atom probe tomography

Atom Probe Tomography (APT) is currently a well-established technique to analyse the composition of solid materials including metals, semiconductors and ceramics with up to near-atomic resolution. Using an aqueous glucose solution, we now extended the technique to frozen solutions. While the mass signals of the common glucose fragments C(x)H(y) and C(x)O(y)H(z) overlap with (H(2)O)(n)H from water, we achieved stoichiometrically correct values via signal deconvolution. Density functional theory (DFT) calculations were performed to investigate the stability of the detected pyranose fragments. This paper demonstrates APT’s capabilities to achieve sub-nanometre resolution in tracing whole glucose molecules in a frozen solution by using cryogenic workflows. We use a solution of defined concentration to investigate the chemical resolution capabilities as a step toward the measurement of biological molecules. Due to the evaporation of nearly intact glucose molecules, their position within the measured 3D volume of the solution can be determined with sub-nanometre resolution. Our analyses take analytical techniques to a new level, since chemical characterization methods for cryogenically-frozen solutions or biological materials are limited

Nanoglass–Nanocrystal Composite - a Novel Material Class for Enhanced Strength–Plasticity Synergy

The properties of a material can be engineered by manipulating its atomic and chemical architecture. Nanoglasses which have been recently invented and comprise nanosized glassy particles separated by amorphous interfaces, have shown promising properties. A potential way to exploit the structural benefits of nanoglasses and of nanocrystalline materials is to optimize the composition to obtain crystals forming within the glassy particles. Here, a metastable Fe‐10 at% Sc nanoglass is synthesized. A complex hierarchical microstructure is evidenced experimentally at the atomic scale. This bulk material comprises grains of a Fe$_{90}$Sc$_{10}$ amorphous matrix separated by an amorphous interfacial network enriched and likely stabilized by hydrogen, and property‐enhancing pure‐Fe nanocrystals self‐assembled within the matrix. This composite structure leads a yield strength above 2.5 GPa with an exceptional quasi‐homogeneous plastic flow of more than 60% in compression. This work opens new pathways to design materials with even superior properties

Crater formation by fast ions: comparison of experiment with Molecular Dynamics simulations

An incident fast ion in the electronic stopping regime produces a track of excitations which can lead to particle ejection and cratering. Molecular Dynamics simulations of the evolution of the deposited energy were used to study the resulting crater morphology as a function of the excitation density in a cylindrical track for large angle of incidence with respect to the surface normal. Surprisingly, the overall behavior is shown to be similar to that seen in the experimental data for crater formation in polymers. However, the simulations give greater insight into the cratering process. The threshold for crater formation occurs when the excitation density approaches the cohesive energy density, and a crater rim is formed at about six times that energy density. The crater length scales roughly as the square root of the electronic stopping power, and the crater width and depth seem to saturate for the largest energy densities considered here. The number of ejected particles, the sputtering yield, is shown to be much smaller than simple estimates based on crater size unless the full crater morphology is considered. Therefore, crater size can not easily be used to estimate the sputtering yield.Comment: LaTeX, 7 pages, 5 EPS figures. For related figures/movies, see: http://dirac.ms.virginia.edu/~emb3t/craters/craters.html New version uploaded 5/16/01, with minor text changes + new figure