Geochemical Endmembers preserved in Gale Crater: A tale of two mudstones and their compositional differences according to ChemCam

Gale crater contains two fine-grained mudstone sedimentary units: The Sheepbed mudstone member, and the Murray formation mud-stones. These mudstones formed as part of an ancient fluviolacustrine system. The NASA Curiosity rover has analysed these mudstone units using the Chemistry and Camera (ChemCam), Alpha Particle X-ray Spectrometer (APXS) and Chemistry and Mineralogy (CheMin) onboard instrument suites. Subsequent mineralogical analyses have uncovered a wide geochemical and mineralogical diversity across and within these two mudstone formations. This study aims to determine the principal cause (alteration or source region) of this geochemical variation through a statistical analysis of the ChemCam dataset up to sol 1482, including the lower to middle Murray formation

Characterisation of Float Rocks at Ireson Hill, Gale Crater

Float rocks discovered by surface missions on Mars have given unique insights into the sedimentary, diagenetic and igneous processes that have operated throughout the planets history. In addition, Gale sedimentary rocks, both float and in situ, record a combination of source compositions and diagenetic overprints. We examine a group of float rocks that were identified by the Mars Science Laboratory missions Curiosity rover at the Ireson Hill site, circa. sol 1600 using ChemCam LIBS, APXS and images from the MastCam, Mars Hand Lens Imager (MAHLI) and ChemCam Remote Micro-Imager (RMI) cameras. Geochemical data provided by the APXS and ChemCam instruments allow us to compare the compositions of these rocks to known rock types from Gale crater, as well as elsewhere on Mars. Ireson Hill is a 15 m long butte in the Murray formation with a dark cap-ping unit with chemical and stratigraphic consistency with the Stimson formation. A total of 6 float rocks have been studied on the butte

Geochemical variation in the Stimson formation of Gale crater: Provenance, mineral sorting, and a comparison with modern Martian dunes

The Mars Science Laboratory Curiosity rover has encountered both ancient lithified and modern active aeolian dune deposits within Gale crater, providing an opportunity to study how aeolian processes have changed during Gale crater's geological history. This study uses data from the Chemistry and Camera (ChemCam) and Chemistry and Mineralogy (CheMin) instrument suites onboard Curiosity to; (1) constrain the diagenetic processes that lithified and altered the ancient aeolian Stimson formation, (2) investigate whether the geochemical signature in the Stimson formation is consistent with the aeolian mafic-felsic mineral sorting trend identified in the modern Bagnold dune fields in Gale crater, and (3) discuss the provenance of the Stimson sediments, comparing it to those identified in the modern dune and ancient river and lake deposits also analyzed along Curiosity's traverse. The ancient Stimson dune deposits that stratigraphically overlie the Gale fluvio-lacustrine units were analyzed in two locations; the Emerson and the Naukluft plateaus. ChemCam data show that the Stimson formation has subtle variations in MgO, Al2O3, Na2O, and K2O between the two localities. An agglomerative cluster analysis of the constrained Stimson dataset reveals five clusters, four of which relate to different proportions of mafic and felsic minerals analyzed by ChemCam. In general, the cluster analysis shows that the Emerson plateau has a greater proportion of mafic minerals and fewer coarse, felsic grains relative to the Naukluft plateau. This variation in mafic and felsic minerals between localities suggests a southwest to northeast net sediment transport direction due to aeolian mineral sorting dynamics preferentially transporting mafic minerals that are easier to saltate than the elongate, often coarser, felsic minerals. This derived transport direction for the Stimson formation supports that determined by sedimentological evidence and is opposite to that previously determined for the active Bagnold dunes inferring a change in the wind regime with time. An opposite sediment transport direction between the ancient and modern dunes in Gale crater further supports geochemical and mineralogical evidence that suggests different basaltic source regions. Compositionally, the bulk Stimson formation is most similar to the subalkaline basalt source region that is inferred to be the dominant sediment source of the fluvio-lacustrine Bradbury group. This is likely the result of the Stimson formation and basaltic Bradbury group sediments sharing a similar local basaltic source region such as the rim and walls of Gale crater

Alteration trends and geochemical source region characteristics preserved in the fluviolacustrine sedimentary record of Gale crater, Mars

The Mars Science Laboratory’s Chemistry and Camera (ChemCam) instrument suite on-board the Curiosity rover has analysed ∼1200 sedimentary targets during the mission up to sol 1482. These targets have included sedimentary rock, diagenetic features (e.g., fracture-associated alteration halos, mineral veins, nodules, and erosion resistant raised ridges), active aeolian fines, soils and float. We have isolated ChemCam geochemical trends relating to diagenetic features and alteration products from those of the sedimentary rock in order to identify the compositional characteristics of Gale crater’s sediment source regions. The effects of grain size variation on sedimentary unit geochemistry have been taken into account by grouping and analysing geological units according to grain size. With obvious diagenetic features removed from the database, and predominately isochemical aqueous alteration inferred for the Mt Sharp Group samples, we propose that source region composition is a stronger source of geochemical change between the Bradbury and Mt Sharp Groups than open-system alteration. Additionally, a lack of correlation between the Chemical Index of Alteration (CIA) values and SiO2, MgO or FeOT indicates that the slight increase in chemical weathering of the Mt Sharp Group sediments was insufficient to overprint sediment source compositional signatures. This has led to the identification of five unique igneous endmember compositions which we hypothesise to have contributed to Gale crater’s stratigraphic record. These endmembers are: (1) a subalkaline basalt, compositionally similar to the tholeiitic Adirondack Class basalts of Gusev crater, and dominant within the finer grained units up to the base of Mt Sharp; (2) a trachybasalt, mostly identified within conglomerate units from the Darwin waypoint to the base of Mt Sharp; (3) a potassium-rich volcanic source, determined from strong potassium enrichment and a high abundance of sanidine that is most dominant in the fluvial sandstones and conglomerates of the Kimberley formation; (4) a highly evolved, silica-rich igneous source that correlates with the presence of tridymite, and is recorded in the lacustrine mudstone of Mt Sharp’s Marias Pass locality; and, (5) a fractionated, relatively SiO2-rich subalkaline basalt, seen to have influenced the composition of mudstone deposited in the lower part of the Mt Sharp Group. Endmembers (1), (2), (3), and (4) have previously been identified at specific waypoints along the rover’s traverse, but we show that their influence extends throughout Gale’s stratigraphic record. The occurrence of detected endmembers is also strongly correlated with stratigraphic position, which suggests changing sediment source regions with time. We conclude that Gale sediment provenances were much more varied than suggested by the largely homogenous, globally-distributed Martian basalt inferred from orbit, showing that complex magmatic assemblages exist within the ancient highland crust surrounding Gale

Identification and Description of a Silicic Volcaniclastic Layer in Gale Crater, Mars, Using Active Neutron Interrogation

The Dynamic Albedo of Neutrons instrument aboard the Mars Science Laboratory rover, Curiosity, has been used to map a stratigraphically conformable layer of high‐SiO² material in Gale crater. Previous work has shown that this material contains tridymite, a high‐temperature/low‐pressure felsic mineral, interpreted to have a volcanic source rock. We describe several characteristics including orientation, extent, hydration, and geochemistry, consistent with a volcaniclastic material conformably deposited within a lacustrine mudstone succession. Relationships with widely dispersed alteration features and orbital detections of hydrated SiO² suggest that this high‐SiO² layer extends at least 17 km laterally. Mineralogical abundances previously reported for this high‐SiO² material indicated that hydrous species were restricted to the amorphous (non‐crystalline) fraction, which is dominated by SiO². The low mean bulk hydration of this high‐SiO² layer (1.85 ± 0.13 wt.% water‐equivalent hydrogen) is consistent with silicic glass in addition to opal‐A and opal‐CT. Persistent volcanic glass and tridymite in addition to opal in an ancient sedimentary unit indicates that the conversion to more ordered forms of crystalline SiO² has not proceeded to completion and that this material has had only limited exposure to water since it originally erupted, despite having been transported in a fluviolacustrine system. Our results, including the conformable nature, large areal extent, and presence of volcanic glass, indicate that this high‐SiO² material is derived from the product of evolved magma on Mars. This is the first identification of a silicic volcaniclastic layer on another planet and has important implications for magma evolution mechanisms on single‐plate planets

The Role of Diagenesis at Vera Rubin Ridge in Gale Crater, Mars, and the Chemostratigraphy of the Murray Formation as Observed by the Chemcam Instrument

The Mars Science Laboratory (MSL) Curiosity rover explored Vera Rubin ridge (VRR) in Gale crater, Mars, for almost 500 sols (Mars days) between arriving at the ridge on sol 1809 of the mission in September 2017 and leaving it on sol 2302 upon entering the Glen Torridon area south of the ridge. VRR is a topographic ridge on the central mound, Aeolis Mons (Mt. Sharp), in Gale crater that displays a strong hematite spectral signature from orbit. In-situ observations on the ridge led to the recognition that the ridge-forming rocks belong to the Murray formation, the lowermost exposed stratigraphic unit of the Mt. Sharp group, that was first encountered at the Pahrump Hills location. Including VRR rocks, the Murray formation, interpreted to be primarily deposited in an ancient lacustrine environment in Gale crater, is more than 300 m thick. VRR itself is composed of two stratigraphic members within the Murray formation, the Pettegrove Point member overlain by the Jura member. The Pettegrove Point member overlies the Blunts Point member of the Murray formation. Areas of gray coloration are observed in the Jura member predominantly, but also in the Pettegrove Point member. Generally, gray areas are found in local topographic depressions, but contacts between red and gray rocks crosscut stratigraphy. Additionally, cm-scale dark concretions with very high iron-content are commonly observed in gray rocks, typically surrounded by a lighttoned zone that is conversely depleted in iron. A key goal for the VRR campaign was to characterize geochemical variations in the ridge-forming rocks to investigate the role of primary and diagenetic controls on the geochemistry and morphology of VRR. Here, we present observations by the ChemCam instrument on VRR and compare these to the full Murray formation chemostratigraphy. This work was recently submitted to a special issue of JGRPlanets that detail the full VRR campaign