6,878 research outputs found
3x3 Multibeam Network for a Triangular Array of Three Radiating Elements
A multibeam antenna study based on Butler network will be undertaken in this document. These antenna designs combines phase shift systems with multibeam networks to optimize multiple channel systems. The system will work at 1.7 GHz with circular polarization. Specifically, result simulations and measurements of 3 element triangular subarray will be shown. A 45 element triangular array will be formed by the subarrays. Using triangular subarrays, side lobes and crossing points are reduced
Temperature dependent dynamic and static magnetic response in magnetic tunnel junctions with Permalloy layers
Ferromagnetic resonance and static magnetic properties of CoFe/Al2O3/CoFe/Py
and CoFe/Al2O3/CoFeB/Py magnetic tunnel junctions and of 25nm thick
single-layer Permalloy(Py) films have been studied as a function of temperature
down to 2K. The temperature dependence of the ferromagnetic resonance excited
in the Py layers in magnetic tunnel junctions shows knee-like enhancement of
the resonance frequency accompanied by an anomaly in the magnetization near
60K. We attribute the anomalous static and dynamic magnetic response at low
temperatures to interface stress induced magnetic reorientation transition at
the Py interface which could be influenced by dipolar soft-hard layer coupling
through the Al2O3 barrier
Photodynamic inactivation of Lasiodiplodia theobromae: lighting the way towards an environmentally friendly phytosanitary treatment
The fungus Lasiodiplodia theobromae is one of the main causal agents of trunk canker and dieback of grapevine. The objective of this work was to evaluate the efficiency of photodynamic inactivation (PDI) of L. theobromae with synthetic and natural photosensitizers and irradiation with either sunlight or artificial photosynthetically active radiation. Although the growth of the mycelium could not be completely prevented with natural sunlight irradiation, phenothiazine dyes (methylene blue, MB; toluidine blue O, TBO), riboflavin and a cationic porphyrin (Tetra-Py+-Me) caused complete inhibition under continuous irradiation with artificial light. Free radicals were the main cytotoxic agents in the PDI with MB, indicating the predominance of the type I mechanism. PDI with MB or Tetra-Py+-Me may represent a promising approach for the sanitation of vine material in greenhouse nurseries, in order to reduce the risk of infection upon grafting.publishe
New approaches on the study of the psychometric properties of the STAI
The main purpose of this study was to analyze the psychometric properties of the State-Trait Anxiety Inventory (STAI1). Previous studies have indicated different factor solutions. Nevertheless, there is still a lack of consensus about the best dimensional model of STAI scores.The sample consisted of 417 participants, composed of 387 (29.71% male) healthy participants (comparison group: M=35.5 years; SD=8.40), and 30 (36.66% male) patient (clinical group M=35.8 years; SD=12.94).The internal consistency evaluated through Ordinal Alpha was good, 0.98 and 0.94 in the non-clinical and the clinical samples, respectively. Test-retest reliability (two weeks) for Total Score was 0.81 for the non-clinical subsample, and 0.93 for the clinical subsample. Confirmatory factor analyses supported both a four factor model and bifactor model. Also, STAI scores showed statistically significant correlations with Burns Anxiety Inventory (Burns-A) scores. Furthermore, results showed statistically significant differences in the mean scores of the STAI between the clinical and the non-clinical subsamples.The psychometric properties of the STAI were adequate. The present study contributes to better understand the STAI structure through the comparison of new approaches in the study of the STAI internal structure. The results found may contribute in the efforts to improve the evaluation and identification of anxiety symptoms and disorders
Modelling wind turbine power curves based on Frank’s copula
Presented at: 21st International Conference on Renewable Energies and Power Quality (ICREPQ’23)In the study of wind turbines, one of the most relevant and useful indicators is the power curve. It has been shown to be of paramount importance in evaluating turbine performance and therefore reducing operation and maintenance (O&M) costs. Various techniques can be applied to model and obtain the shape of this curve, which relates the electrical power generated by a turbine to the wind speed. Statistical copulas are used in this paper, a tool used in other fields such as econometrics, and whose potential lies in its ability to capture the complex dependency between the variables involved. In particular, the Frank copula is applied to obtain a probabilistic model of the power curve of a wind turbine. This model is compared with the Gaussian Mixture Model, a technique widely used to obtain parametric probabilistic models. As a result of this comparison, it is observed that the Frank copula model fits the power curve of the wind turbine with greater precision and reliability, which would allow its use for prediction and fault detection
Brevibacterium EB3 inoculation enhances rhizobacterial community interactions leading to improved growth of Salicornia europaea
Plant growth-promoting bacteria (PGPB) can revolutionize sustainable agriculture by improving crop yields and resilience in the face of climate change and soil degradation. However, one of the challenges of using PGPB is identifying strains that can colonize and establish beneficial relationships with plant hosts and microbiomes. This study examined the effects of single and co-inoculations with three PGPB strains (Brevibacterium casei EB3, Pseudomonas oryzihabitans RL18, and Bacillus aryabhattai SP20) on the rhizosphere microbiome of the halophyte crop Salicornia europaea. 16S rRNA gene amplicon sequencing was used to analyze the rhizosphere bacterial communities' diversity, structure, and composition. PGPB inoculations significantly changed the diversity and structure of the bacterial communities in the rhizosphere, accounting for 74 % of the total variability. The strain B. casei EB3 was the most effective at colonizing the rhizosphere and establishing interactions with other beneficial community members. Notably, the treatments associated with higher plant yield, consistently featured the presence of B. casei EB3 and higher connectivity between this strain and taxa known to promote growth and alleviate salt stress in plants such as Marinobacterium, Pseudomonas and Vibrio. These findings are consistent with bacterial inoculants' direct and indirect effect in boosting bacteria-plant cooperation within the rhizosphere, ultimately leading to a shift towards an optimized rhizosphere and beneficial traits for plants
Reactor mixing angle from hybrid neutrino masses
In terms of its eigenvector decomposition, the neutrino mass matrix (in the
basis where the charged lepton mass matrix is diagonal) can be understood as
originating from a tribimaximal dominant structure with small deviations, as
demanded by data. If neutrino masses originate from at least two different
mechanisms, referred to as "hybrid neutrino masses", the experimentally
observed structure naturally emerges provided one mechanism accounts for the
dominant tribimaximal structure while the other is responsible for the
deviations. We demonstrate the feasibility of this picture in a fairly
model-independent way by using lepton-number-violating effective operators,
whose structure we assume becomes dictated by an underlying flavor
symmetry. We show that if a second mechanism is at work, the requirement of
generating a reactor angle within its experimental range always fixes the solar
and atmospheric angles in agreement with data, in contrast to the case where
the deviations are induced by next-to-leading order effective operators. We
prove this idea is viable by constructing an -based ultraviolet
completion, where the dominant tribimaximal structure arises from the type-I
seesaw while the subleading contribution is determined by either type-II or
type-III seesaw driven by a non-trivial singlet (minimal hybrid model).
After finding general criteria, we identify all the symmetries
capable of producing such -based minimal hybrid models.Comment: 18 pages, 5 figures. v3: section including sum rules added, accepted
by JHE
Recommended from our members
Identification of Vibration Modes in Floating Offshore Wind Turbines
Compared to onshore turbines, floating offshore wind turbines (FOWTs) take advantage of the increased availability of offshore wind while causing less environmental impact. However, the strong winds, waves, and currents to which they are subjected trigger oscillations that can cause significant damage to the entire structural system and reduce its useful life. To reduce these loads, active tower damping techniques such as filter banks can be used. These filters must be carefully tuned to block specific vibration frequencies. Therefore, it is essential to analyze the nature of the oscillations in the FOWT and to understand how the frequencies vary in time. This topic is usually approached from a point of view very focused on a specific turbine. What is proposed here is a general method, which can be applied to any type of wind turbine, to automatically study the relationship between vibration frequencies and the degrees of freedom (DOF) of the turbine, which facilitates the design of structural control. Each frequency is associated with the DOF of the FOWT that produces it. This methodology has been successfully validated in simulation experiments with the NREL 5 MW ITI Barge FOWT. Under the wind conditions of the experiments, the main frequency found is 0.605 Hz. This frequency coincides with the 3P theoretical frequency of the FOWT. This proposal may help to design structural control systems able to damp these vibration frequencies with accuracy and efficiency
- …