200 research outputs found
“Zombie attack” a new way to teach Chemistry
The Higher Education requires new models which allow training people able to adapt and survive in changing environments. It is based on the use of technologies and the adaptation of knowledge to people. It is about an education according to circumstances, which is adapted to context and virtual behaviour of people.
One of the main difficulties that lecturers find in the classroom is how to maintain students' attention and interest in their subject, especially when students also think that the subject is not important for their training. In order to motivate these students, innovation in educational techniques and methodologies, such as experiential learning, are progressively being imposed to and/or coordinated with the traditional ones. Escape Room is a very modern concept in education, based on the development of mental skills for the solution of enigmas and problems. It is a tool to develop the cooperative, cognitive, deductive and logical reasoning skills of the students.
In this work, an educational gamification experience based on the escape room concept is presented. The students have 1 hour and 30 minutes to carry out this activity. They will have to solve four puzzles and enigmas that will give them the key to open a treasure chest and finally let them escape from the classroom. Logic, ingenuity and teamwork will allow participants to develop not only chemical competence, but also other basic skills. The story that is told throughout the escape room is a zombie attack: the city has been infected (with a virus) and only the occupants of the room where the activity takes place have not been infected. In addition, they can all protect themselves if they are able to open the chest where the antidote is located. The aim of this activity is to enhance the knowledge acquired throughout the semester as well as the development of skills.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec
Alternativas de futuro al sector residencial
[CASTELLÀ] La materia prima del carpintero no es otra que la madera, la del cantero la piedra, la del alfarero el barro, la del herrero el hierro y así ha sido durante siglos y así seguirá siendo. Pero a pesar de que la materia prima sigue inalterablemente siendo la misma a lo largo del tiempo, no ha sucedido lo mismo con los innumerables frutos que han realizado los artesanos. La variedad de los productos ha sido, es y seguirá siendo infinita.
Eso mismo puede suceder con un solar (terreno urbanizado apto para la construcción), lo podemos transformar en innumerables productos inmobiliarios. Su definición, transformación, comercialización, viabilidad económica, y financiación son algunos de los aspectos que valoraremos en este trabajo con mayor detenimiento.
Éste pretende ser un ejercicio que sirva de inspiración a los promotores ávidos de nuevos proyectos y con ganas de plantearse nuevos negocios.[ANGLÈS] The raw material of the carpenter is none other than the wood, the stonemason’s is the Stone, the potter’s is the clay, the blacksmith’s is the iron and so has been for centuries and will continue to be. But in spite of the fact that the raw material remains unalterable over time, it has not happened the same with the countless fruits that thr craftsmen have made. The variety of the products has been, is and will continue to be infinite.
The same thing can happen with a plot (serviced land suitable for construction), we can transform it in countless real state products. It is definition, processing, marketing, economic viability, and financing are some of the aspects that will assess this work with greater detail.
It aims to be an exercise that serves as an inspiration to the avoid promoters of new projects and with a desire to look for a new business
Implications for Social Impact of Dialogic Teaching and Learning
The science of dialogic teaching and learning has especially flourished over the last four decades across age-groups, cultures, and contexts. A wide array of studies has examined the uniqueness of dialogue as a powerful tool to lead effective instructional practices, transform the socio-cultural context and people's mindsets, among many others. However, despite the efforts to extend the benefits of this approach, certain difficulties exist which have hindered the consolidation of dialogic pedagogies in the classroom. This review discusses the implications for social impact of the scientific developments on dialogic teaching and learning. Particularly, an overview of the state of the art on dialogic education is presented. Social improvements in academic attainment and social cohesion are some of the fundamental issues discussed. Those are especially relevant to address crucial needs in education and solve some of the most pressing social problems. A communicative mix-methods approach emerges as one of the critical aspects of this field of research in educational psychology to achieve social impact. Some limitations, such as teachers sustaining different forms of monologic discourse, and challenges for a broader impact are discussed in this review
Rapid Magnetic Dispersive solid phase extraction to preconcentration/determination of Cd and Pb in aqueous samples
A new magnetic dispersive solid phase extraction (MDSPE) method and graphite furnace atomic absorption spectrometry (GFAAS) have been combined for the analysis of Cd and Pb in environmental samples. For the preconcentration, a shell structured Fe3O4@graphene oxide nanospheres was synthetized and characterized. The material was suspended in the ionic liquid 1-n-butyl-3-metilimidazolium tetrafluoroborate [BMIM][BF4], the obtained stable colloidal suspension is named ferrofluid. GO presents excellent adsorbent properties for organic species due to the presence of the electronic π system. For this reason, the organic ligand [1,5-bis-(2-dipyridyl) methylene] thiocarbonohydrazide (DPTH) was used in order to form organic complexes of Cd and Pb. Once the DPTH ligand has been added to sample, the ferrofluid was injected and finely dispersed in the sample solution in order to extract the formed chelates. The complete adsorption of the chelates took place within few seconds then, the solid was separated from the solution with the aid of a strong magnet. Cd and Pb ions were desorbed from the material with 1 mL of acid nitric 5% solution and quantified by GFAAS. All experimental and instrumental variables were optimized.
The analytical performances of the optimized method were: EF (Enrichment factor): 200 with LODs (detection limit): 0.005 and 0.004 µg L-1 and LOQs (determination limit): 0.017 and 0.013 µg L-1, for Cd and Pb, respectively. The reliability of the developed procedure was tested by relative standard deviation (% RSD), which was found to be < 5%. The accuracy of the proposed method was verified using certified reference materials (SLRS-5, SPS-SW2, and BCR-723) and by determining the analyte content in spiked aqueous samples. Sea waters and tap water samples collected from Málaga (Spain) were also analysed. The determined values were in good agreement with the certified values and the recoveries for the spiked samples were around 100% in all cases.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec
Cold vapour generation electrothermal atomic absorption spectrometry and solid phase extraction based on a new nanosorbent for sensitive HG determination in environmental samples (sea water and river water)
Reunión bianual del Grupo Regional Andaluz de la Sociedad Española de Química AnalíticaMercury is not an essential element for plant or animal life and it is a potential
environmental toxic because of its tendency to form covalent bonds with organic
molecules and the high stability of the Hg-C bond. Reports estimate a total mercury
concentration in natural waters ranging from 0.2 to 100 ng L-1. Due to this fact, highly
sensitive methods are required for direct determination of such extremely low levels. In
this work, a rapid and simple method was developed for separation and preconcentration
of mercury by flow injection solid phase extraction coupled with on-line
chemical vapour generation electrothermal atomic absorption spectrometry. The
system is based on chelating retention of the analyte onto the mini column filled with a
mesoporous silica functionalized with 1,5 bis (di-2-pyridyl) methylene
thiocarbohydrazide. The main aim of this work was to develop a precise and accurate
method for the determination of the Hg. Under the optima conditions and 120 s
preconcentration time, the detection limit obtained was 0.009 μg L-1, with RSDs 3.7 %
for 0.2 μg L-1, 4.8 % for 1 μg L-1 and enrichment factor 4, Furthermore, the method
proposed has permitted the determination of Hg with a reduction in the analysis time,
the sample throughput was about 18 h-1, low consumption of reagents and sample
volume.
The method was applied to the determination of Hg in sea water and river water. For
the quality control of the analytical performance and the validation of the newly
developed method, the analysis of two certified samples, TMDA 54.4 Fortified Lake,
and LGC6187 River sediment was addressed. The results showed good agreement
with the certified values.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Determination of Pb using F3eO4 GO join to DPTH for ferrofluid based dispersive solid phase extraction
In this work has been described a green and rapid method the synthesis of Fe3O4@GO nanospheres via chemical covalent bonding method. The Fe3O4@GO DPTH was applied to ferrofluid based dispersive solid phase extraction of lead as a model analyte using an ionic liquid carrier. The ferro fluid allows the rapid extraction of lead ions using a low amount of sorbent material. Besides, the magnetic separation greatly improved the separation rate. The presented method is highly time saving due to the high dispersion of the sorbent in the aqueous phase and also there is no need to shake the sample solution.
The other benefits of the proposed methods are simplicity of operation, low cost, high sorption capacity, high recovery and high preconcentration.
In order to optimize the method the following parameters were studied: sample solution pH, concentration of DPTH, extraction time, amount of sorbent, desorption conditions, influence of ionic strength, and tolerance of potentially interfering ions.
The sample or standard solution containing Pb(II), DPTH (0.05% ethanol w/v), NaCl (0.5 %, w/v) and buffer (pH = 5.6) was poured into high volume. Then 240 µL of ferrofluid was injected rapidly into the sample solution through a syringe. Thereupon, a dark cloudy suspension was formed, ferrofluid was dispersed thoroughly in solution and the complex of Pb-DPTH was extracted in a few seconds. Subsequently, a strong magnet was placed at the bottom of the tube to let the extractant settle. After about 3 min, the solution became clear and the supernatant was discarded simply by decanting it. Afterwards, the magnet was removed and 1 mL of nitric acid (2.0 mol L−1) was introduced to the vial to desorb the Pb by sonication. Finally, the sorbent was separated by positioning the magnet to the outside of the tube and the concentration of Pb in acidic aqueous phase was determined by ETAAS.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Enriquecimiento automático de ontologías biomédicas mediante el uso de mappings
Dione es una representación en OWL del ICD-10-CM, consistente lógicamente, cuyos axiomas definen las inclusiones y exclusiones del ICD-10-CM mediante una metodología basada en los mappings ICD-10-CM/SNOMED-CT, proporcionados por UMLS y BioPortal, y que han sido validados por una comunidad de expertos en el ámbito biomédico. En este artículo se presenta una metodología automática que permite la población con axiomas en Dione a partir de los mappings establecidos entre ICD-10-CM y otra ontología biomédica que hayan sido proporcionados por BioPortal. Para mostrar el funcionamiento de esta metodología, se han utilizado los mappings entre Dione y ORDO. Esta última es una ontología que incluye el conjunto de enfermedades raras, genes y otras características para la población de nuevos axiomas en Dione. Una vez que estos axiomas se incluyeron en Dione, se comprobó su consistencia utilizando el razonador ELK y se mostró con un caso de uso que las clases equivalentes entre las ontologías DIONE-ORDO permitían la inferencia de axiomas que definen una clase ICD-10-CM en DIONE a una clase que representa una enfermedad rara en ORDO y, viceversa. Esta nueva metodología se puede aplicar a dos ontologías biomédicas cualquiera cuyos mappings estén previamente definidos en BioPortal.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Magnetic dispersive solid phase microextraction coupled with on-line chemical vapor generation method to extraction/preconcentration of mercury from environmental samples and determination by graphite furnace atomic absorption spectrometry.
Mercury (Hg) is classified as priority hazardous substances. Concentrations found in the aquatic environment are at trace levels as result of natural processes, such as erosion and volcanism, and anthropogenic discharges related mainly to industrial and mining activities. Mercury is one of the most potent neurotoxins known, showing a high number of adverse health effects in animals and humans.
For this reason, a simple and rapid method for the determination and preconcentration of mercury in environmental waters is proposed. This work is based on magnetic dispersive solid phase microextraction (MDSPME) coupled with on-line chemical vapour generation (CVG). Graphite furnace atomic absorption spectrometry (GFAAS) was employed for the quantification of Hg. In the preconcentration step, a shell structured Fe3O4@graphene oxide was suspended in the ionic liquid carrier (1-n-butyl-3-metilimidazolium tetrafluoroborate [BMIM][BF4]), obtaining a stable colloidal suspension called ferrofluid. This sorbent possesses as large contact surface area and a high density of polar groups on its surface. The nanoparticles, when finely dispersed in the sample solution, result in almost complete extraction of Hg within a few seconds. All experimental and instrumental variables were optimized and the method was adequately validated by the analysis of certified reference materials of environmental waters.
Acknowledgements
The authors would like to thank Plan Propio “Proyecto Puente” de la Universidad de Málaga for financial support of this work.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec
Solid sampling determination of ZnO nanoparticles in eyeshadows by graphite furnace atomic absorption spectrometry
The application of nanoparticles (NPs) in science and technology is a fast growing field. Therefore, reliable and straightforward analytical methods are required for their fast determination in different types of samples. In this work, a method that enables the determination of the average size of ZnO NPs, besides their concentration, discriminating them from ionic zinc, has been optimized. The method is based on solid sampling high-resolution continuum source electrothermal atomic absorption spectrometry (SS-HR-CS-GFAAS), and has been applied to determination and characterization of ZnO NPs in cosmetic samples.
Recently, graphite furnace atomic absorption spectrometry has been introduced as a new tool to determine the size of nanoparticles by evaluation of the following parameters: atomization delay (tad) and atomization rate (kat). In this work both parameters (besides peak area) have been obtained from absorbance signals for a line of Zn with low sensitivity. Two multiple response surface designs have been used in order to optimize the adequate furnace program to achieve our aims. All the optimization experiments were performed using baby´s skin irritation protective cream. The optimized furnace program is shown in Table 1.
Table 1. Optimized furnace program
The size calibrations were performed against solid (powered) ZnO standards, from 50-nm to 500-nm sized nanoparticles. The correlation coefficients (R value) of the linear calibration were not worse than 0.9982. The optimized method was tested in other types of cosmetic samples such as eyeshadow samples with good results. The determination of the MNPs’ size was validated by transmission electron microscopy (TEM) and the Zn concentration in the solid samples was validated by atomic fluorescence spectroscopy (AFS).
Acknowledgements (optional) [Garamond font, 10 points]
The authors would like to thank Plan propio “Proyecto Puente” de la Universidad de Málaga for financial support of this work.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec
Intervenció en psicologia clínica i de la salut (IPCyS)
Podeu consultar la Setena trobada de professorat de Ciències de la Salut completa a: http://hdl.handle.net/2445/4335
- …