NUMERICAL INVESTIGATION ON BEARING CAPACITY OF A PIPELINE ON CLAYEY SOILS

The bearing capacity of a pipeline foundation is crucial for the pipeline stability design. It is usually inappropriate to analyze the bearing capacity for the pipeline with special circular section directly by employing the theory for conventional rectangular strip footings. In this study, the ultimate loads of the pipeline on clayey soils are investigated numerically. A plane-strain finite element model is proposed to simulate the quasi-static process of the pipeline penetrating into the soil, in which the adaptive-grid technique and the 'contact-pair' algorithm are employed, and the Drucker-Prager constitutive model is used for modeling the soil plasticity. Based on the proposed numerical model, the development of soil plastic zone and the incremental-displacement vector field beneath the pipeline are examined numerically. It is indicated that, according to the obtained pipeline vertical load-displacement curves, concurrently referring to the plastic strain field and/or the soil incremental-displacement vector field, the shear failure type (e.g., general shear failure, punching shear failure) and the collapse loads can be thereby determined. The present numerical results match well with the analytical solutions of slip-line theory in plasticity mechanics

Vertical Bearing Capacity of a Partially-Embedded Pipeline on Tresca Soils

Slip-line field solutions are presented for the ultimate load of submarine pipelines on a purely cohesive soil obeying Tresca yield criterion, taking into account of pipe embedment and pipe-soil contact friction. The derived bearing capacity factors for a smooth pipeline degenerate into those for the traditional strip-line footing when the embedment approaches zero. Parametric studies demonstrate that the bearing capacity factors for pipeline foundations are significantly influenced by the pipeline embedment and the pipe-soil frictional coefficient. With the increase of pipeline embedment, the bearing capacity factor Nc decreases gradually, and finally reaches the minimum value (4.0) when the embedment equals to pipeline radius. As such, if the pipeline is directly treated as a traditional strip footing, the bearing capacity factor Nc would be over evaluated. The ultimate bearing loads increase with increasing pipeline embedment and pipe-soil frictional coefficient

Regulatory T cells in rheumatoid arthritis showed increased plasticity toward Th17 but retained suppressive function in peripheral blood

OBJECTIVE: Regulatory T cells (Tregs) with the plasticity of producing proinflammatory cytokine IL-17 have been demonstrated under normal and pathogenic conditions. However, it remains unclear whether IL-17-producing Tregs lose their suppressive functions because of their plasticity toward Th17 in autoimmunity. The aim of this study was to investigate IL-17-producing Tregs from patients with rheumatoid arthritis (RA), and characterise their regulatory capacity and clinical significance. METHODS: Foxp3 and IL-17 coexpression were evaluated in CD4 T lymphocytes from RA patients. An in vitro T cell polarisation assay was performed to investigate the role of proinflammatory cytokines in IL-17-producing Treg polarisation. The suppressive function of IL-17-producing Tregs in RA was assessed by an in vitro suppression assay. The relationship between this Treg subset and clinical features in RA patients was analysed using Spearman's rank correlation test. RESULTS: A higher frequency of IL-17-producing Tregs was present in the peripheral blood of RA patients compared with healthy subjects. These cells from peripheral blood showed phenotypic characteristics of Th17 and Treg cells, and suppressed T cell proliferation in vitro. Tregs in RA synovial fluid lost suppressive function. The Th17 plasticity of Tregs could be induced by IL-6 and IL-23. An increased ratio of this Treg subset was associated with decreased levels of inflammatory markers, including the erythrocyte sedimentation rate and C-reactive protein level, in patients with RA. CONCLUSIONS: Increased levels of IL-17-producing Tregs were identified in RA patients. This Treg subset with Th17 plasticity in peripheral blood retained suppressive functions and was associated with milder inflammatory conditions, suggesting that this Treg population works as a negative regulator in RA, but in RA synovial site it may be pathogenic.postprin

Large Anomalous Hall effect in a silicon-based magnetic semiconductor

Magnetic semiconductors are attracting high interest because of their potential use for spintronics, a new technology which merges electronics and manipulation of conduction electron spins. (GaMn)As and (GaMn)N have recently emerged as the most popular materials for this new technology. While Curie temperatures are rising towards room temperature, these materials can only be fabricated in thin film form, are heavily defective, and are not obviously compatible with Si. We show here that it is productive to consider transition metal monosilicides as potential alternatives. In particular, we report the discovery that the bulk metallic magnets derived from doping the narrow gap insulator FeSi with Co share the very high anomalous Hall conductance of (GaMn)As, while displaying Curie temperatures as high as 53 K. Our work opens up a new arena for spintronics, involving a bulk material based only on transition metals and Si, and which we have proven to display a variety of large magnetic field effects on easily measured electrical properties.Comment: 19 pages with 5 figure

Physiological Roles of ArcA, Crp, and EtrA and Their Interactive Control on Aerobic and Anaerobic Respiration in Shewanella oneidensis

In the genome of Shewanella oneidensis, genes encoding the global regulators ArcA, Crp, and EtrA have been identified. All these proteins deviate from their counterparts in E. coli significantly in terms of functionality and regulon. It is worth investigating the involvement and relationship of these global regulators in aerobic and anaerobic respiration in S. oneidensis. In this study, the impact of the transcriptional factors ArcA, Crp, and EtrA on aerobic and anaerobic respiration in S. oneidensis were assessed. While all these proteins appeared to be functional in vivo, the importance of individual proteins in these two major biological processes differed. The ArcA transcriptional factor was critical in aerobic respiration while the Crp protein was indispensible in anaerobic respiration. Using a newly developed reporter system, it was found that expression of arcA and etrA was not influenced by growth conditions but transcription of crp was induced by removal of oxygen. An analysis of the impact of each protein on transcription of the others revealed that Crp expression was independent of the other factors whereas ArcA repressed both etrA and its own transcription while EtrA also repressed arcA transcription. Transcriptional levels of arcA in the wild type, crp, and etrA strains under either aerobic or anaerobic conditions were further validated by quantitative immunoblotting with a polyclonal antibody against ArcA. This extensive survey demonstrated that all these three global regulators are functional in S. oneidensis. In addition, the reporter system constructed in this study will facilitate in vivo transcriptional analysis of targeted promoters

A multi-perspective dynamic feature concept in adaptive NC machining of complex freeform surfaces

This paper presents a new concept of feature for freeform surface machining that defines the changes in feature status during real manufacturing situations which have not been sufficiently addressed by current international standards and previous research in feature technology. These changes are multi-perspective, including (i) changes in depth-of-cut: the geometry of a feature in the depth-of-cut direction changes during different machining operations such as roughing, semi-finishing and finishing; (ii) changes across the surface: a surface may be divided into different machining regions (effectively sub-features) for the selection of appropriate manufacturing methods for each region such as different cutting tools, parameters, set-ups or machine tools; and (iii) changes in resources or manufacturing capabilities may require the re-planning of depth-of-cuts, division of machining regions and manufacturing operations (machines, tools, set-ups and parameters). Adding the above dynamic information to the part information models in current CAD systems (which only represent the final state of parts) would significantly improve the accuracy, efficiency and timeliness of manufacturing planning and optimisation, especially for the integrated NC machining planning for complex freeform surfaces. A case study in an aircraft manufacturing company will be included in this paper

Dairy consumption and cardiometabolic diseases: systematic review and updated meta-analyses of prospective cohort studies

Purpose of Review Dairy products contain both beneficial and harmful nutrients in relation to cardiometabolic diseases. Here, we provide the latest scientific evidence regarding the relationship between dairy products and cardiometabolic diseases by reviewing the literature and updating meta-analyses of observational studies. Recent Findings We updated our previous meta-analyses of cohort studies on type 2 diabetes, coronary heart disease (CHD), and stroke with nine studies and confirmed previous results. Total dairy and low-fat dairy (per 200 g/d) were inversely associated with a 3–4% lower risk of diabetes. Yogurt was non-linearly inversely associatedwith diabetes (RR = 0.86, 95%CI: 0.83–0.90 at 80 g/ d). Total dairy and milk were not associated with CHD (RR~1.0). An increment of 200 g of daily milk intake was associated with an 8% lower risk of stroke. Summary The latest scientific evidence confirmed neutral or beneficial associations between dairy products and risk of cardiometabolic diseases

Numerical analysis of interfacial shear degradation effects on axial uplift bearing capacity of a tension pile

The bearing capacity of tension piles involves complex interactions between the tension-pile with the neighboring sediments. A two-dimensional axisymmetric finite element model (FEM) is proposed and verified with the existing experimental results to simulate the uplift resistance of the pile under axial/vertical loading. With an updated contact-pair algorithm for modeling pile-soil interfacial behavior, the modeling for both the interfacial bonding and the sliding friction mechanisms is fulfilled in the present model, which is capable of simulating the shear degradation effects by the breakage treatment of the pile-soil bonding. The bearing capacity of tension piles in various sediments can be predicted efficiently. Numerical results indicate that, due to the interfacial bonding effect, the enhancement of the tension bearing capacity gets more obvious for higher cohesion strength of the sediments. The interfacial bonding degradation of is the main reason for the occurrence of "critical embedded length" phenomenon. (C) 2010 Published by Elsevier Ltd

Disformally self-tuning gravity

We extend a previous self-tuning analysis of the most general scalar-tensor theory of gravity in four dimensions with second order field equations by considering a generalized coupling to the matter sector. Through allowing a disformal coupling to matter we are able to extend the Fab Four model and construct a new class of theories that are able to tune away the cosmological constant on Friedmann-Lemaitre-Robertson-Walker backgrounds